Cody Casey
Yes, it is possible to cook with pot resin. Resin is a byproduct of smoking cannabis and contains THC molecules. While it is commonly used for smoking, some people have experimented with cooking with resin. One popular method is to create cannabutter by boiling resin with butter and water, and then using this mixture to cook ramen noodles. It is also possible to mix resin directly into other foods or drinks, or to emulsify it with fats like butter, ghee, or oil. However, it is important to note that getting the dosing right can be tricky, and that decarboxylation (activation) is often necessary before consuming cannabis edibles.
Characteristics and values of cooking with pot resin
| Characteristics | Values |
|---|---|
| Ease of cooking | Super easy to mix into fats like butter, ghee or oil |
| Consistency | Concentrates can be mixed directly into edibles |
| Dosage | Tricky to get right, comes down to math |
| Decarboxylation | Many concentrates need to go through decarboxylation before eating |
| Decarbing | Sometimes called "activation", the step cannabis must undergo before consumption |
| Heating | Concentrates should be heated slowly and at low temperatures to preserve terpenes |
| Absorption | Oil like sunflower lecithin can be added to promote absorption of THC |
| Taste | Some people don't mind the taste, while others find it gross |
| Effects | Users have reported feeling "smashed" after consuming resin |
Explore related products
What You'll Learn
Cooking resin with butter
Cooking with resin is possible, and it can be used in recipes by infusing it with butter or oil. However, it is important to note that resin is tar with collected THC molecules, and cooking it in butter will not remove the THC molecules from the tar. If you want to remove THC from tar, you would need to use butane or iso.
To cook with resin, you can follow these steps:
Step 1: Prepare the resin
Firstly, clean out your bowl to collect the resin. You can use a variety of tools to scrape or collect the resin, such as a dabber or tongs. Ensure you have enough resin for your recipe, as it is a key ingredient in creating potent edibles.
Step 2: Melt the butter
Place a medium saucepan over low heat and add a cup of butter. Heat the butter until it is completely melted. The amount of butter used can vary depending on the desired potency and the recipe you are following. For instance, a recipe might call for 100 g of butter with the highest fat content available.
Step 3: Combine resin and butter
Once the butter is melted, add the resin to the saucepan. You can also add your pipes to the mixture if desired. Heat the mixture for 10-15 minutes on medium heat, stirring occasionally, until it emits a strong odour.
Step 4: Strain and store
At this point, you can strain the mixture to remove any plant material or unwanted solids. Place a piece of cheesecloth across a bowl and pour the mixture through it. Secure the cheesecloth and dispose of the plant material. Place the strained butter in the refrigerator to solidify.
Step 5: Use in recipes
Once the butter is solidified, it can be used in various recipes as a direct substitute for regular butter. This is often referred to as "cannabutter". It is important to note that edibles made with resin or cannabis concentrates are significantly more potent than those made with just the cannabis flower. Always approach with caution, especially if you are a first-time user.
Additionally, some people choose to consume the resin-butter mixture without straining it. They add the mixture directly to ramen noodles, consuming both the saturated noodles and the water. This method may not be appealing to everyone due to the strong odour and taste.
Overhead Drumming: Hard Pan for Success?
You may want to see also
Explore related products
Decarbing resin
Decarbing, or decarboxylation, is the process of adding heat to your extract or flower to "activate" certain cannabinoids. Acidic cannabinoids like THCA are inactive and will not produce a high when ingested. It is only once THCA converts (decarbs) into Delta-9 THC that it will produce a high.
To decarb rosin, you will need to place your rosin in a heat-safe glass container, such as a mason jar. Be sure not to fill the jar up too much, as the rosin will bubble and rise during the process. Cover or seal the jar with its lid or tinfoil. Place the jar in the oven and heat it at between 220°F to 250°F for 25 to 35 minutes. Stir the rosin every 10 to 15 minutes. You will know the rosin is fully decarbed when it stops bubbling.
After decarbing, it is important to let the rosin cool to room temperature before opening the jar, as opening the jar while hot may cause a loss of terpenes. If you are making edibles, add fat (like coconut oil or butter) to the rosin and put it back in the oven for 20 minutes.
The decarbing process is necessary if you are using rosin for edibles, as it ensures that all of the THCA is fully converted into Delta-9 THC, which is what produces a high when consuming edibles. It is not necessary to decarb rosin if you are dabbing it, as the decarbing process will occur once the rosin hits the hot banger.
Cleaning Burnt Pans: Salt to the Rescue!
You may want to see also
Explore related products
Mixing resin with oil
It is possible to cook with pot resin. One way to do this is to make cannabutter by combining butter, water, and resin in a pan and cooking over medium heat. The resin can then be used to make baked goods.
However, it is important to note that the process of mixing resin with oil is not specifically mentioned in the sources provided. Here is some general information on mixing resin with a hardener, which may be of use:
When mixing epoxy resin with a hardener, it is important to follow the correct weight ratio specified on the product's hardener label or technical data sheet. This mixture can then be used for various applications, such as wetting out fiberglass, coating, or casting. Before beginning, it is recommended to start with a small test batch to understand the mixing and curing process, as the epoxy's open or workable time can vary depending on temperature.
To mix the resin and hardener, use a stir stick to blend the properly metered amounts for at least one full minute, ensuring that you scrape the sides of the mixing container. This process initiates a chemical reaction that transforms the liquid ingredients into a solid state. The cure time is shorter when the mixture is warmer and longer when it is cooler.
During the curing process, the epoxy will first become tacky and then progress to a gel state with the firmness of hard rubber. Midway through the initial cure phase, the mixture will become tack-free. This is the optimal time to bond or recoat surfaces without surface preparation, as a strong chemical bond can be formed. As the mixture approaches the final cure phase, the potential for a chemical bond diminishes.
Skittles-Studded Brownies: Pampered Chef's Delightful Dessert Recipe
You may want to see also
Explore related products
Resin dosing
Some people experiment with cooking using resin, which is the tarry substance that collects in pipes or bowls used for smoking cannabis. It is important to note that resin contains THC molecules, which can cause a potent high when consumed. Here is a basic process for dosing resin into food:
- Boil the resin, along with any pipes or utensils containing resin residue, in water and butter for 10-15 minutes.
- Add the saturated butter and resin mixture to a package of ramen (without seasoning).
- Cook the ramen until the noodles absorb the resin-infused butter.
- Consume the ramen and the water it was cooked in on an empty stomach to experience the effects of the THC in the resin.
Alternatively, you can create "cannabutter" by combining butter, water, and resin in a pan over medium heat. You can then use this cannabutter in baking recipes, such as brownies.
- Dosing machines, such as the REXSON E60, which can handle liquid resin and provide precise flow adjustment.
- Resin dispensing systems that can dose, mix, and dispense at high pressure, accommodating various materials and viscosities.
- Low-pressure dosing units, such as the SAIP EL series, designed for accurate and reliable dosing of elastomers and prepolymers.
- Metering systems, like the eldodis gear metering system, which ensures precise and continuous metering of medium to high-viscosity resins.
- Resin binder dosing systems, such as those from Palmer Manufacturing, which use stainless steel bellows for accurate and maintenance-free resin dosing.
It is important to note that when working with resin in industrial applications, particularly with epoxy resins, safety precautions must be followed. Some resins require specific curing conditions, such as the use of a pressure pot to maintain pressure during the entire curing time to reduce bubble size.
Best Non-Stick Grill Pans: Reviews and Buying Guide
You may want to see also
Explore related products
Ramen with resin
Ramen noodles are a staple food for cannabis enthusiasts. They are tasty, quick to prepare, and available in a variety of flavors. Infusing ramen noodles with cannabis can enhance the dining experience while also getting you high.
Ingredients
- Ramen noodles
- Resin
- Butter
- Water
- Spices (chilli, oregano, etc.)
- Vegetables (carrots, onion, garlic, etc.)
Instructions
First, boil your resin and pipes in water and butter for 10-15 minutes. You'll know it's ready when it starts to smell bad. Next, add the ramen noodles without the seasoning. Cook until the noodles are saturated, then eat the noodles and drink the water.
It's important to note that cooking with resin may not remove all the THC molecules from the tar. If you want to do this, you may need to use butane or iso.
If you want to avoid using resin, you can make cannabutter or a cannabis olive oil extract to add to your ramen. To do this, pour water into a pot and set the heat to medium so that the water simmers. Finely grind your weed if you plan to eat it, or keep it chunky if you want to remove it later. Place the butter and weed in the hot water. The heat will activate the weed, and the butter will bind the cannabinoids to the fat. Be careful not to let the temperature get too high, or the cannabinoids will degrade. Cover the pot and heat the mixture for around 30 minutes. You can then choose to sift out the cooked bud material or eat it with the noodles. If you decide to remove the buds, be careful not to remove too much fat, as that's what will get you high. You can strain the liquid through a mesh sieve, making sure the holes are large enough for the fat to pass through but too small for the plant matter. Finally, add the ramen noodles and included spices to the mixture. Keep the water simmering without boiling and stir the noodles for an even cook. When the noodles are ready, place them in a bowl with the broth and enjoy!
The effects of the cannabis will kick in anywhere from 30 minutes to 3 hours after eating. You can also add cheese, basil, and various vegetables to your recipe.
Repairing BMW X5 Oil Pan Leak: A Step-by-Step Guide
You may want to see also
Frequently asked questions
Yes, you can cook with pot resin. It is easy to mix resin with fats like butter, ghee, or oil. You can also mix the resin with sunflower lecithin to thin it out and promote the absorption of THC.
First, the resin must undergo decarboxylation, or "activation", which is the process of exposing the cannabis to heat. This can be done by simmering the resin in butter for several hours, or by placing the resin in an oven or frying pan and heating it at a low temperature.
You can cook anything with resin that calls for butter, or any other fat. For example, you can make brownies, or ramen.
