Burnt pans are a common problem for cooks, but there are many ways to clean them without resorting to expensive, specialised products. One unusual but effective method is to use shaving foam. Simply spray a generous amount of shaving foam onto the charred surface and leave it to sit for around half an hour. Then, scrub the pan with a scouring pad to reveal sparkling results.
Characteristics | Values |
---|---|
Effectiveness | Shaving cream can be used to clean burnt pans, but it may not be effective on grease splatters. |
Ease of Use | Shaving cream can be awkward to dispense and requires a lot of product. |
Cost | Shaving cream is a fairly inexpensive cleaning option. |
Time | Shaving cream should be left on the surface for 15-30 minutes. |
Applicability | Shaving cream can be used to clean a variety of surfaces, including pans, ovens, walls, clothes, mirrors, stainless steel, chrome, bathtubs, couches, and floors. |
What You'll Learn
Shaving cream can be used to clean burnt pans
To clean a burnt pan with shaving cream, simply spray a generous amount of shaving cream onto the charred surface and let it sit for about half an hour. Then, scrub the pan with a scouring pad to get sparkling results. This method is also effective for removing burn marks from the bottom of pots and pans.
The shaving cream will magically penetrate and soften the burnt mess, making it easy to wipe away without much effort. It is also a great option for cleaning because it is relatively inexpensive compared to specialized cleaning products.
In addition to cleaning burnt pans, shaving cream can be used for a variety of other cleaning purposes. It can be used to clean grime from painted walls, remove laundry stains, prevent bathroom mirror fogging, shine stainless steel and chrome fixtures, and clean the bathtub or shower floor.
However, it is important to note that only basic, inexpensive, non-gel, white foaming shaving cream should be used for cleaning. Gels, moisturizers, or colors added to the shaving cream could potentially stain some surfaces.
Breaking Free: Oil Pan Plug Solutions
You may want to see also
It can also clean grime from painted walls
Shaving cream can be used to clean grime from painted walls. It is a good choice for quick clean-ups as it contains very little water, which means there will be no drips onto cleaner areas of the wall. It is also a budget-friendly option for cleaning walls as it is relatively inexpensive.
To use shaving cream to clean walls, start by dampening a microfiber cloth with water and wringing it out until it is not dripping. Then, spray a small amount of shaving cream onto the cloth. Gently scrub away the smudges and dirt from the wall. Finally, use a dry microfiber cloth to wipe away any residue.
It is important to note that only basic, non-gel, white foaming shaving cream without added gels, moisturisers, or colours should be used for cleaning. This is because shaving cream with heavy moisturisers can leave an oily residue, and shaving cream with added gels or colours may stain some surfaces.
Pan-Seared Salmon: Perfect Pairing Ideas
You may want to see also
Shaving cream can remove laundry stains
Shaving cream can be used to clean burned pans, and it can also be used to remove laundry stains. Here's how:
Shaving Cream to the Rescue for Removing Laundry Stains
Shaving cream can be handy for treating stains on washable clothing. It can help lift stubborn stains from coarse fibres like carpeting and even works on upholstery. Here's a step-by-step guide:
- For spills, use a paper towel to blot the stain and remove as much moisture as possible.
- Use a dull knife or spoon to lift away any solids from the fabric. Avoid rubbing the stain, as this will push it deeper into the fibres and make it harder to remove.
- Dampen the stained area with water.
- Work a small amount of shaving cream into the fabric with your fingers.
- Rinse the area with cold water or wipe it with a white cloth dipped in cold water. Always use a white cloth or paper towel to prevent colour transfer.
- Finally, blot the area dry with a white cloth or paper towel if you plan to wear the garment soon. Otherwise, you can add it to your regular laundry load.
A Few Things to Keep in Mind:
- Use basic, inexpensive foaming shaving cream without added gels, moisturisers, or colours for cleaning.
- Before using shaving cream on fabric, check the care tag to ensure it is safe for the material. If no information is available, perform a spot test on an inconspicuous area.
- Shaving cream is particularly effective on makeup, oil, and grease stains.
So, the next time you spill something on your favourite shirt or get a stubborn stain on your carpet, reach for the shaving cream! It's an easy and inexpensive way to keep your clothes and fabrics looking their best.
Restoring Carbon Steel: Removing Bad Seasoning
You may want to see also
Prevent bathroom mirrors from fogging up with shaving cream
Shaving cream can be used to clean burnt pots and pans. It can also be used to prevent bathroom mirrors from fogging up. Here's how:
- Spray some shaving cream on a clean microfiber cloth.
- Use the cloth to apply a thin layer of shaving cream to the mirror. You can also spritz the mirror with a mixture of water and soap first and gently wipe it across the mirror.
- Use a second, clean, dry microfiber cloth to buff away the foam until the mirror is clear.
This hack works because shaving cream is a surfactant, which helps prevent water condensation particles from sticking to the glass of the mirror. The anti-fog protection can last anywhere from a few days to a few weeks, depending on various factors, including the number of showers and the presence of an exhaust fan.
Stainless Steel Pans: Avoid These Mistakes
You may want to see also
It can also shine stainless steel
Shaving cream can be used to shine stainless steel appliances, such as sinks, and restore their shine by removing streaks and water spots. To do this, dampen a microfiber cloth and wring it out until it is not dripping. Then, use the damp cloth to rub shaving cream onto the stainless steel surface. Finally, use a second, clean, dry microfiber cloth to buff the surface to a shine.
Shaving cream can also be used to clean stainless steel appliances such as microwaves, ovens, and dishwashers. To do this, squirt shaving cream onto the surface, rub it over the appliance, and then wipe it off with a damp sponge or microfiber cloth.
It is important to note that not all stainless steel appliances are created equal, and some may require an additional step to achieve a streak-free shine. For example, after cleaning a dishwasher with shaving cream, it may be necessary to moisturize the surface with olive oil to achieve a perfect shine.
Shaving cream contains many of the same active ingredients found in bar or liquid soap, such as surfactants, emulsifiers, and cleaning agents. This means it can be used as a substitute for cleaning your hands or wiping down surfaces like painted walls, kitchen cabinets, and bathroom sinks.
Silver Pans: Non-Stick or Not?
You may want to see also
Frequently asked questions
Shaving cream is a good cleaning agent as it contains many of the same active ingredients found in bar or liquid soap, such as surfactants, emulsifiers, and cleaning agents.
Shaving cream can help to remove burnt-on grease and food particles from pans by softening the mess, making it easier to wipe away.
To clean a burned pan with shaving cream, first, spray or spread a generous amount of shaving cream on the affected area. Let it sit for about 15-30 minutes, then use a scouring pad or sponge to scrub away the burnt residue. Finally, rinse the pan with water to remove any remaining shaving cream and residue.