Marianne Martinez
The Blink Mini is a solid indoor camera that can be enhanced by the Pan-Tilt Mount, providing a 360-degree view of your home. The mount gives the camera the ability to rotate sideways and tilt vertically. Installing the Blink Mini with the Pan-Tilt Mount is straightforward, but there are a few steps to follow. This guide will take you through the process of attaching your Blink Mini to the Pan-Tilt Mount and adjusting the settings for optimal performance.
| Characteristics | Values |
|---|---|
| Motion Range | 350 degrees left and right, 125 degrees up and down, 360-degree view |
| Mounting Options | Horizontal surfaces, walls, and ceilings |
| Mounting Accessories | Built-in 1/4-inch threaded screw hole, third-party accessories available |
| App Compatibility | Blink app, Alexa devices |
| Power Supply | USB Micro Type B connector |
| Camera | Micro USB |
| Live View | Default home position, motion controls, extended live view with subscription |
| Additional Features | Home button, flip video, recalibration |
| Purchase Options | Standalone mount, bundle with Mini camera |
Explore related products
What You'll Learn
Unplug the Blink Mini and disconnect it from its base
To attach your Blink Mini to a pan-tilt mount, you must first unplug the camera and disconnect it from its base. This is the first step in the installation process and will require a slight bit of force to pull the camera up off the stem. If you need further help, you can refer to an extensive guide on removing the Blink Mini from its stand.
Once the Blink Mini is disconnected from its base, you can then connect the Micro USB cable from the mount to the back of the camera. This is the second step in the installation process. The Micro USB cable powers the mount and camera, and once connected, the mount will automatically calibrate.
The Blink Mini is a solid indoor camera, but when coupled with the Pan-Tilt Mount, it can rotate sideways and tilt vertically, providing a 360-degree view of your home. The mount has a quarter-inch threaded screw hole in the bottom of its base, which can be used to attach the camera to walls or ceilings.
The Pan-Tilt Mount can be purchased as a standalone product to work with your existing Mini camera or as a bundle with a new Mini camera. The mount is designed to be used with the Blink Mini camera and supports user-controlled pan-tilt functionality directly from the Blink app.
Tefal Pans: Oil or No Oil?
You may want to see also
Explore related products
Connect the Micro USB cable from the mount to the camera
To connect the Micro USB cable from the mount to the camera, first, unplug the Blink Mini camera and disconnect it from its base. Pull the camera up off the stem—you might need to apply a little force here. Now, take the Micro USB cable from the mount and plug it into the back of the Blink Mini camera. The Micro USB cable powers the mount and camera. Once power is restored, the Blink app will notify you that the indoor Mini camera now includes the Pan-Tilt Mount. The mount will then automatically calibrate itself, rotating and moving the stem to ensure everything is working correctly and has enough space.
If the app doesn't update, close it and restart it. You can also try using the Live View in the Blink app to test the camera's orientation. If you've mounted the camera on a ceiling or overhead surface, you might need to flip the camera's video so that it outputs properly. You can do this in the Blink app under Device Settings. Go to Video and Photo and tap Flip Video to turn on this setting.
Exploring Old San Juan: The Pan America Pier Distance
You may want to see also
Explore related products
Power on the mount and camera
Once you have physically connected your Blink Mini to the Pan-Tilt Mount, you can power on the mount and camera.
First, plug the cable into the USB port in the back of the Mini. Then, plug the other end of the cable into the power supply and plug the power supply into your wall outlet.
When power is restored, the Blink app will notify you that the indoor Mini camera has been updated to include the Pan-Tilt Mount. The mount will then automatically calibrate, moving and rotating the stem to ensure everything works correctly and has enough space. If the app doesn't update, close and restart it.
You can test the camera's orientation by using Live View in the Blink app. If you have mounted the camera on a ceiling or overhead surface, you may need to flip the camera's video so that it outputs properly. You can do this in the Blink app under Device Settings. Tap the More button on your camera's thumbnail and select Device Settings in the lower right corner of the thumbnail image. Then, select Video and Photo and tap Flip Video to turn on this setting.
Immersion Blenders and Nonstick Pans: The Perfect Pair?
You may want to see also
Explore related products
Mount the camera on a wall or ceiling using the built-in screw hole
The Blink Mini camera can be mounted on a wall or ceiling using the built-in screw hole. The mount has a quarter-inch threaded screw hole in the bottom of its base. This screw hole can be used to attach the camera to walls or ceilings using a third-party mounting accessory.
To mount the camera on a wall or ceiling, follow these steps:
- Choose the correct mounting point on the camera: For walls or other vertical surfaces, use the vertical mounting point located above the USB port at the rear of the camera.
- Secure the camera to the wall or ceiling: Use the appropriate screws and hardware for your surface type, following the manufacturer's instructions for any third-party mounting accessories.
- Connect the camera to power: Plug the cable into the USB port in the back of the Mini, and then plug the other end of the cable into a power supply and wall outlet.
- Test the camera's orientation: Use the Live View in the Blink app to ensure the camera is positioned correctly.
- Update the camera settings: If the camera is mounted on a ceiling, you may need to flip the video so that it outputs properly. This can be done in the Blink app's Device Settings by selecting "Video and Photo" and then "Flip Video."
By following these steps, you can securely mount your Blink Mini camera to a wall or ceiling using the built-in screw hole and a third-party mounting accessory.
Sealing Stainless Steel: Pan Protection
You may want to see also
Explore related products
Update the camera's settings and flip the video feed
To update your camera settings and flip the video feed, you must first have downloaded the Blink app and set up a Blink Account. Once you have installed the app, you can proceed to log in and create an account.
To update the Wi-Fi settings for your Blink Mini, you will need to tap More (...) on your camera's thumbnail and select Device Settings. From there, tap General Settings > Change Wi-Fi. On the Change Wi-Fi screen, follow the instruction to "Press and release the reset button on the camera until red and blue lights flash. When ready, the lights will display: Blinking Blue, Steady Green." Then, tap Discover Device, and a pop-up window will prompt you to join the "Blink" Wi-Fi network, "BLINK-XXXX." Tap Join and select your Wi-Fi network from the list. If your network is not listed, tap Refresh List. Enter your Wi-Fi password and tap Join. If successful, the following message will display: "Wired Floodlight camera Wi-Fi changed!" Tap Done to return to the Home screen.
To flip the video feed, go to the Device Settings menu and select Video and Photo. Then, tap Flip Video to turn on this setting. This should be enabled when mounting a Mini or Mini 2 camera upside down on a ceiling so that the image is rotated right-side up.
If you encounter any issues, reboot the sync module and camera. If that doesn't work, uninstall the camera and then install it again.
Drilling Big Block Chevy Oil Pan Rails: The Ultimate Guide
You may want to see also
Frequently asked questions
First, unplug the Blink Mini and disconnect it from its base. Then, connect the Micro USB cable from the mount to the back of the Blink Mini camera.
Yes, you can mount your Blink Mini on a ceiling or wall using the built-in 1/4 inch threaded screw hole in the bottom of the base. If you are using a third-party mounting accessory, refer to the manufacturer's instructions.
You can invert the camera view by using the "Flip Video" button in the Mini Camera settings.
No, the Pan-Tilt Mount does not work with Alexa commands. However, you can still access live views and other functions from your Mini camera on Alexa devices.
Yes, the Pan-Tilt Mount can be purchased as a standalone product to work with your existing Mini camera.
