Tiffany Haney
The DJI Ronin S is a popular camera stabiliser, but it requires careful balancing to ensure smooth footage. The gimbal's pan axis, roll axis, and tilt axis all need to be adjusted to achieve the correct balance. Users have reported issues with the pan axis not balancing properly, which can cause unstable footage with the camera jumping left and right. To balance the pan axis, users must adjust the mount backward and forward, ensuring the camera sits flat. The camera lens should then be pointed upward, and the tilt axis adjusted until the camera stays facing upward on its own. The roll axis is then adjusted left and right until the camera is balanced. Finally, the pan axis is adjusted by sliding it forward and backward.
How to balance pan axis Ronin S
| Characteristics | Values |
|---|---|
| Mount the grip to the gimbal | Toggle the lever to the locked position |
| Attach the standard tripod to the grip | Unfold the tripod and place it on a level surface |
| Align the screws on the focus wheel with the screw holes on the gimbal’s 8-pin ports | Tighten the screws on the focus wheel with a hexagonal socket |
| Mount the camera dovetail plate to the camera and secure it with the screw | Attach the lens support to the camera dovetail plate to secure the lens |
| Tighten the gimbal pan axis, roll axis, and tilt axis’ knobs | Slide the camera dovetail plate onto the camera mounting base and tighten the lock |
| Rotate the lens and ensure the camera is facing upwards vertically | Check whether the camera is balanced |
| If the camera is top or bottom heavy | Push the tilt axis arm up or down |
| Hold and fix the roll axis motor | Check whether the camera is balanced |
| If the left end of the roll axis is tilted downwards | The camera is left heavy, push the roll axis arm to the right |
| Adjust the camera | Rotate the camera to the left or right by 45 degrees |
| Grab the grip and tilt it sideways | Check the gimbal’s movement |
| If the gimbal is titled to the right or left | Push the pan axis arm forward or backward and tighten the knob |
| If the camera can stay still | The Ronin-S is balanced |
Explore related products
What You'll Learn
Adjust the mount so the camera sits flat
When adjusting the mount so that the camera sits flat, you must first ensure that the camera is not falling forwards or backwards. Adjust the mount backward and forward until you find the spot where the camera sits flat.
Then, rotate the camera so that the lens is pointing upwards. Adjust the tilt axis until the camera stays facing upwards on its own. You should be able to tilt the camera at any angle, and it will stay put.
If you need to, you can go back and readjust the tripod plate after this step.
Next, adjust the roll axis left and right until the camera is balanced. Hold and fix the roll-axis motor and check whether the camera is balanced. If the left end of the roll axis is tilted downwards, the camera is left-heavy. Push the roll axis arm to the right.
Finally, grab the grip and tilt it sideways. Then, check the gimbal's movement. If the gimbal is tilted to the right or left, push the pan axis arm forward or backward. Tighten the knob. If the camera can stay still, the Ronin-S is balanced.
Southwest Flights: Panhandle to Orlando
You may want to see also
Explore related products
Rotate the camera, adjust the tilt axis
To balance the Ronin-S, rotate the camera so that the lens is pointing upwards vertically. Adjust the tilt axis until the camera stays facing upwards on its own. You should be able to tilt the camera at any angle, and it will stay put. If the camera is top or bottom-heavy, push the tilt axis arm up or down.
Make sure the camera is not tilted to one side; if it is, pull the tilt arm towards the other side. Rotate the camera, so the lens points forward, and adjust the horizontal position of the camera on the tilt arm. If needed, readjust the camera position.
Rotate the tilt axis so that the camera lens is tilting up at about 45 degrees. Lock the tilt axis and unlock the roll axis. Once you have found balance, you should be able to roll the arm so that the camera stays in position without rolling back to the start position.
Tilt the Ronin-S at 45 degrees and adjust the pan arm so that the camera finds balance on the pan rotation.
Lasagna Pan Dimensions: A Guide
You may want to see also
Explore related products
Adjust the roll axis left and right
To balance the roll axis left and right on your Ronin S, you must first ensure that the camera is sitting flat and that the lens is pointing upwards. Once this is done, you can adjust the roll axis left and right until the camera is balanced.
If the left end of the roll axis is tilted downwards, the camera is left heavy. To fix this, push the roll axis arm to the right and hold the arm, lifting it. Tighten the roll axis knob. Now, rotate the camera left and right by 45 degrees. If the camera stays still, the roll axis is balanced.
If the camera is top or bottom heavy, you can adjust the tilt axis arm up or down. You may need to go back and readjust the tripod plate after this step.
To check the gimbal's movement, grab the grip and tilt it sideways. If the gimbal is tilted to the right or left, push the pan axis arm forward or backward and tighten the knob.
Delicious Cheesecake Slices: How Many Can You Get?
You may want to see also
Explore related products
Adjust the pan axis
Adjusting the pan axis is an important step in balancing your Ronin-S. This process ensures that your camera remains stable and does not tilt to either side. Here is a detailed guide on how to adjust the pan axis:
Firstly, grab the grip and tilt it sideways. This step will help you observe the gimbal's movement and identify any tilting issues. If you notice that the gimbal is tilting to the right or left, you can correct this by pushing the pan axis arm either forward or backward. This adjustment will help you achieve a balanced position.
Next, tighten the knob on the pan axis to secure the adjustment you just made. Once tightened, check if the camera can remain still and hold its position. If it can, this indicates that the Ronin-S is now balanced on the pan axis.
Additionally, it is important to ensure that the camera is sitting flat and not falling forwards or backward. You can adjust the mount backward or forward to find the optimal position. This step ensures that the camera is balanced and stable, preventing unwanted movement during use.
The pan axis adjustment process is crucial for achieving smooth and stable footage with your Ronin-S. By following these steps, you can ensure that your camera is properly balanced, resulting in better overall performance and improved shooting experience.
Remember to refer to the user manual or seek further guidance if you encounter any challenges during the balancing process. Balancing your Ronin-S may require some practice and adjustments to suit your specific camera setup.
Garage Water Heater: Drain Pan Needed?
You may want to see also
Explore related products
Check the gimbal's movement
To check the gimbal's movement, grab the grip and tilt it sideways. If the gimbal is tilted to the right or left, push the pan axis arm forward or backward and tighten the knob. If the camera can stay still, the Ronin-S is balanced.
The gimbal's movement can also be fine-tuned through the Ronin mobile app. When you open the app, selecting the configuration option will give you access to the Motor Parameters. While it is recommended to use the autotune function, selecting the advanced setting tap will allow you to fine-tune the gimbal. SmoothTrack will enable you to configure the Ronin S to react appropriately to your movement.
The Ronin S has unlimited movement on the pan axis, allowing users to perform a continuous 360-degree rotation. This can be accessed through the Ronin app. The Flashlight mode is one of three different ways to use the Ronin S, accompanied by the default mode (normal) and the underslung mode.
The gimbal's movement can also be affected by the way the camera is balanced. If the camera is top or bottom heavy, push the tilt axis arm up or down. Rotate the lens and ensure that the camera is facing upwards vertically and check if the camera is balanced.
Lexus GS300 Oil Pan: Location and Maintenance Guide
You may want to see also
Frequently asked questions
The first step is to mount the grip to the gimbal and toggle the lever to the locked position.
If the left end of the roll axis is tilted downwards, the camera is left heavy. You can adjust this by pushing the roll axis arm to the right.
After adjusting the roll axis, rotate the camera to the left or right by 45 degrees. If the camera stays still, the roll axis is balanced.
If the gimbal is tilting to the right or left, push the pan axis arm forward or backward and tighten the knob.
If the camera can stay still after adjusting the pan axis, the Ronin-S is balanced.
