The Ultimate Guide To Cleaning Your Zojirushi Hot Water Pot

How to Clean a Zojirushi Hot Water Pot

Zojirushi hot water pots are a great way to keep water at a constant hot temperature for hot drinks and other culinary uses. However, over time, the inside of the pot can become stained with mineral deposits and limescale buildup, which can affect the taste of your water and the performance of the pot. Here's a step-by-step guide to cleaning your Zojirushi hot water pot and keeping it in tip-top shape:

Supplies:

- Zojirushi Inner Container Cleaner (CD-K03E) or citric acid

- White vinegar (optional)

- Lemon juice (optional)

- Water

- Soft sponge or brush

- Clean towel

Instructions:

1. For a brand new pot, fill it with water to the top line and boil the water for at least two minutes. This will help remove any manufacturing residues and sterilize the pot before first use.

2. Empty the boiled water and rinse the pot. Wipe the interior with a clean, dry towel.

3. To prevent limescale buildup, it is recommended to clean the pot with citric acid or Zojirushi's Inner Container Cleaner every 1-3 months, depending on the mineral content of your water. Higher mineral content will require more frequent cleanings.

4. To clean with citric acid, stir a couple of tablespoons of citric acid into a liter of water until dissolved. You can also use lemon juice or white vinegar instead of citric acid.

5. Fill the pot with water and the cleaning solution until it reaches the maximum water level line. Close the lid.

6. Turn on the pot and press and hold the REBOIL button for at least 3 seconds to activate the descaling mode.

7. Once the cleaning cycle is complete, unplug the pot and dispose of the water.

8. To remove any residual taste or smell of citric acid, fill the pot with fresh water, boil it, and then discard the water.

9. For external cleaning, simply wipe the lid and exterior of the pot with a soft, wet sponge. The lid and safety net are not dishwasher-safe.

10. Remember to empty and dry the pot when it is not in use, and always follow the care instructions provided in the manual for your specific model of Zojirushi hot water pot.

How to clean a brand new Zojirushi hot water pot

Initial Cleaning

If you want to clean your brand new Zojirushi hot water pot before using it for the first time, here's a simple process:

• Fill the electric hot water boiler to its top line with water and boil it for at least two minutes.
• Once boiled, empty the water and rinse out the unit.
• Finally, wipe the interior with a clean and dry towel.

Regular Cleaning

To keep your Zojirushi hot water pot clean and free of limescale buildup, it is recommended to clean it regularly, about once every 1-3 months. Here's a simple process to follow:

• Empty a half cup of lemon juice into the inner container and then fill it with water up to the maximum level line.
• Pour out the boiled water.
• Fill it up with water again (to the top line) and reboil.
• Once boiled, pour out a bit of hot water and let the rest cool.
• After the water has cooled down, empty the pot fully.

Removing Limescale

Limescale buildup can affect the proper functioning of your Zojirushi hot water pot and is not pleasant to look at. To get rid of limescale, follow these steps:

• Pour 2 cups of white vinegar into the inner pot.
• Fill the pot with water up to the top water level.
• Let the water sit for 1 hour.
• Boil the water and leave it for another hour.
• Empty out the water completely.
• If limescale is still present, repeat the process.

Note: Zojirushi recommends cleaning the inner container with their own Inner Container Cleaner (CD-K03E) or citric acid. You can also use bottled lemon juice or white vinegar, but more frequent cleanings will be required.

How to get rid of limescale in a Zojirushi hot water pot

Limescale is a hard white deposit that forms when calcium and magnesium build up in areas with hard water. It is important to descale your Zojirushi hot water pot to prevent a breakdown and to ensure the water tastes as it should.

To get rid of limescale in your Zojirushi hot water pot, you can use Zojirushi's own electric dispensing pot cleaner and descaler, which is made from 100% non-toxic citric acid. This product comes in 8-count or 40-count packs, with each 30-gram packet designed for one cleaning cycle.

Alternatively, you can use a 50-50 mix of vinegar and water. Soak all the affected areas for 15 minutes to an hour, ventilating the area well during this time. Rinse the pot thoroughly afterward and dry. If there are still visible stains and build-up, repeat the process with a stronger vinegar solution, or let it soak overnight.

You can also use lemon juice, which contains acid that will dissolve limescale. Mix lemon juice with warm water, saturate a cloth in the solution, and wrap it around the affected areas. Leave the cloth in place for a few hours, then scrub away the limescale with a scouring pad.

To prevent limescale from building up in your Zojirushi hot water pot, clean the inner container periodically with citric acid every 1-3 months. The frequency will depend on the mineral content of the water being used.

How to clean a Zojirushi hot water pot with citric acid

To clean a Zojirushi hot water pot with citric acid, follow these steps:

First, purchase some citric acid cleaner. Zojirushi sells its own branded citric acid cleaner, which comes in packets. Each packet is designed for one cleaning cycle. You can also buy citric acid from other brands, or in bulk, and portion it out yourself.

Next, dissolve the citric acid in water. If you're using the Zojirushi product, you can follow the instructions on the packet. If you're using a different product, follow the instructions on the packaging.

Then, fill your Zojirushi hot water pot with the citric acid solution. Make sure the pot is filled to the maximum water level line.

Now, close the upper lid of the pot and plug it in. To activate the cleaning cycle, press and hold the "Reboil" button for more than three seconds. This will start the descaling mode.

Once the cleaning cycle is complete, unplug the pot and detach the upper lid. Dispose of the water following the instructions in your pot's manual—look for the section marked "Empty from here".

Finally, fill the pot with fresh water and boil it to remove any remaining traces of citric acid. Allow the water to cool, then dispose of it and wipe the pot dry.

It's recommended that you clean your Zojirushi hot water pot with citric acid every one to three months, depending on how often you use it and the mineral content of your water. If you use water with a high mineral content, you may need to clean your pot more frequently.

How to clean a Zojirushi hot water pot with lemon juice

To clean a Zojirushi hot water pot with lemon juice, you will need to follow the steps outlined below:

Firstly, it is important to note that freshly squeezed lemon juice should not be used, as the pulp can get caught in the pump and damage the boiler. Therefore, it is recommended to use lemon juice from concentrate.

Now, to begin the cleaning process, fill a glass with warm water and add half a cup of lemon juice from concentrate. Stir the mixture until the lemon juice is fully dissolved.

Next, pour the lemon juice mixture into the inner container of the Zojirushi hot water pot and fill it with water up to the maximum water level line. Close the upper lid securely.

After ensuring that the lid is closed, insert the power plug into the unit and press the "REBOIL" button for more than three seconds. This will activate the descaling mode, which is specifically designed for cleaning the inner container of the pot.

Once the cleaning cycle is complete, unplug the power cord and open the upper lid. Dispose of the water by pouring it out from the designated "EMPTY FROM HERE" area.

Finally, to eliminate any lingering odours of lemon juice or citric acid, fill the inner container with fresh water and boil it. After boiling, dispense about a cup of hot water, allow the unit to cool down, and then dispose of the remaining water.

By following these steps, your Zojirushi hot water pot will be thoroughly cleaned and maintained using lemon juice.

How to clean a Zojirushi hot water pot with vinegar

Keeping your Zojirushi hot water pot clean is simple and can be done with vinegar. Here is a step-by-step guide on how to do it:

Initial Cleaning:

Before using your new Zojirushi hot water pot for the first time, it is recommended to give it an initial cleaning. Here's what you need to do:

• Fill the pot with water up to the top line.
• Boil the water for at least two minutes.
• Empty the boiled water and rinse the pot.
• Wipe the interior with a clean and dry towel.

Removing Limescale:

Limescale buildup can affect the proper functioning of your Zojirushi hot water pot. To get rid of limescale, follow these steps:

• Pour 2 cups of white vinegar into the inner pot.
• Fill the pot with water up to the top water level.
• Let the water sit for 1 hour.
• Boil the water and leave it for another hour.
• Empty the pot completely.
• If limescale remains, repeat the process.

Regular Cleaning and Maintenance:

To keep your Zojirushi hot water pot in good condition, it is recommended to clean it regularly, especially if you live in an area with hard water. Here's a simple process to follow every 3 months:

• Empty 1/2 cup of lemon juice or white vinegar into the inner container.
• Fill the pot with water up to the maximum level line.
• Boil the water and then pour it out.
• Refill the pot with water to the top line and reboil.
• Once boiled, pour out a bit of hot water and let the rest cool.
• After the water has cooled down, empty the pot completely.

Using these methods will help maintain the cleanliness and proper functioning of your Zojirushi hot water pot. It is also important to refer to the cleaning and maintenance section of your Zojirushi manual for specific instructions and recommendations.

Frequently asked questions