Cleaning Neff Gas Hob Pan Supports: Step-By-Step Guide

Keeping your gas hob pan supports clean is important to prevent the buildup of food and grease, which can be unsightly and present a fire hazard. While cleaning pan supports can be a tedious task, with the right products and methods, it can be done effectively and efficiently. This paragraph will discuss the best ways to clean Neff gas hob pan supports, ensuring they are returned to their original, germ-free, shiny state.

Soak in hot water

To clean your Neff gas hob pan supports, you must first remove them from the stove. Place them in a sink full of very hot water. For an extra cleaning boost, add some washing powder to the very dirty spots. Leave the pan supports to soak for about 15 minutes to loosen any food debris and grease buildup. If your pan supports are too large to fit in your kitchen sink, try soaking them in the bathtub instead.

If you don't have a bathtub or are looking for a faster solution, you can fill a bucket with hot water and washing powder or soda crystals and soak the pan supports for 15-20 minutes.

After soaking, scrub the pan supports gently with a nylon scrubber, washing-up brush, or steel wool. Ensure that you reach all the nooks and crannies.

Finally, dry the pan supports thoroughly before putting them back to prevent rusting.

Use a soft cloth

To clean your Neff gas hob pan supports, it is recommended to use a soft cloth. Here is a step-by-step guide on how to effectively clean your pan supports using a soft cloth:

Step 1: Soaking

Firstly, remove the pan supports from the stove and place them in a sink full of very hot water. For stubborn stains, add some washing powder or biological washing liquid/powder to the mix. Let the pan supports soak for around 15 minutes to effectively loosen any food debris and grease buildup. If your pan supports are too large for your sink, you can try soaking them in the bathtub instead. Just place them carefully on a rubber non-slip mat to avoid scratching the surface.

Step 2: Scrubbing

After soaking, it's time to gently scrub the pan supports. Use a nylon scrubber, a washing-up brush, or even steel wool saturated with washing-up liquid. Make sure to get into all the nooks and crannies to remove any stubborn grease or food particles. For heavily soiled areas, you can also use a glass scraper to gently lift off burnt-on food residue. However, always be gentle to avoid scratching the surface of your pan supports.

Step 3: Rinsing and Drying

Once you've finished scrubbing, thoroughly rinse the pan supports with warm water. Then, use a soft cloth to dry them completely. This step is crucial to prevent rusting and ensure your pan supports remain in good condition. Make sure to dry not only the top surface but also the underside and all crevices.

Step 4: Additional Cleaning (Optional)

If your pan supports still have some stubborn stains after the initial cleaning, you can try using a specialised hob cleaner. Apply the cleaner to the affected areas and let it penetrate for a few minutes. Then, use a soft cloth to wipe away the cleaner and reveal sparkling clean pan supports. Remember to choose a gentle, non-abrasive cleaner to avoid damaging the finish of your Neff gas hob.

Step 5: Maintenance

To maintain the cleanliness of your Neff gas hob pan supports, consider adding them to your regular cleaning routine. By cleaning them frequently, you'll prevent the buildup of food and grease, making the task much quicker and simpler. Additionally, always allow your pan supports to cool down completely before handling and cleaning them. This will ensure your safety and prevent any accidental burns.

Clean with soapy water

To clean your Neff gas hob pan supports with soapy water, follow these steps:

Step 1: Remove the pan supports from the stove

Take the pan supports off the stove and place them in your sink. If your pan supports are too big for your sink, you can place them in your bath instead.

Step 2: Soak the pan supports

Fill your sink or bath with very hot water and add washing powder or liquid. Leave the pan supports to soak for around 15 minutes. Soaking will help to loosen any food debris and grease that has built up on the supports.

Step 3: Scrub the pan supports

After soaking, gently scrub the pan supports with a nylon scrubber, a washing-up brush, or steel wool. Make sure to get into all the nooks and crannies of the supports. If using steel wool, add the washing-up liquid to the water and ensure the pan supports are thoroughly wet while scrubbing.

Step 4: Rinse and dry the pan supports

Once you have finished scrubbing, rinse the pan supports with clean water and dry them thoroughly with a cloth or kitchen towel. It is important to ensure the pan supports are completely dry before putting them back on the stove to prevent rusting.

Tips:

• For burnt-on grease and fat deposits, you can soak the pan supports in biological washing powder overnight or use a glass scraper to remove large deposits.
• To maintain the finish of your Neff gas hob pan supports, only use gentle cleaning products. More aggressive cleaning solutions may damage the finish.
• Clean your pan supports regularly to avoid a build-up of food and grease.

Dry thoroughly

After you've cleaned your Neff gas hob pan supports, it's important to dry them thoroughly. This is to prevent rusting, which can occur if they are left damp.

Firstly, after scrubbing, make sure to wipe down the pan supports with a dry cloth or paper towel. This will remove any excess water. You can also use a dry, soft cloth to polish the pan supports, removing any streaks or water marks.

Secondly, ensure the pan supports are left to air dry completely. Place them on a drying rack or a dry surface and leave them until they are completely dry. This may take a few hours. You can speed up the process by placing the pan supports near a source of heat, such as an oven or radiator, but do not place them directly on the heat source.

Thirdly, you can use a hairdryer on a low setting to speed up the drying process. Hold the hairdryer at least 6 inches away from the pan supports and move it back and forth to ensure even drying.

Finally, it is important to ensure that the pan supports are completely dry before putting them back on the hob. This may take a few hours, so it is best to clean and dry them at a time when you do not need to use the hob immediately.

Avoid harsh chemicals

To clean your Neff gas hob pan supports without harsh chemicals, follow these steps:

Firstly, wait for the hob to cool down completely before attempting to clean it. Then, remove the pan supports and burners. It is important to note that you should not put your pan supports in the dishwasher, as this may damage them. Instead, fill your sink with very hot water and add some washing powder or soap to create a soapy solution. You can also add a little white vinegar to the solution if you wish. Place the pan supports in the sink and allow them to soak for around 15 minutes. If your sink is too small, you could try soaking them in the bath instead, being careful not to scratch the surface.

After they have soaked, gently scrub the pan supports with a soft brush or nylon scrubber, taking care to get into all the nooks and crannies. You can also use a stainless steel scourer or a sponge for this step. If you prefer, you can add the washing-up liquid to the water in the sink and scrub the pan supports with steel wool. Once you have finished scrubbing, rinse the pan supports thoroughly and dry them completely before putting them back to avoid rust.

For particularly stubborn stains, you can try using a glass scraper to lift off burnt-on food and grease. You could also try a sponge soaked in biological washing powder or liquid, or a product like Stardrops Pink Stuff.

Frequently asked questions