Clean Your Gotham Steel Pan: Removing Stubborn Burnt Oil

Burnt oil on a pan can be a pain to clean, especially if it's a Gotham Steel pan. Gotham Steel pans are ceramic-coated titanium pans designed for cooking without oil or butter. However, if you do choose to use oil or butter, it should be at the proper heat setting to avoid burning. While burnt oil on a Gotham Steel pan may seem like a challenge to remove, there are several methods you can try to get your pan looking like new again.

Use vinegar and baking soda

To remove burnt oil from a Gotham steel pan using vinegar and baking soda, follow these steps:

Firstly, fill the bottom of your pan with water. You need enough water to cover the stuck-on food. Next, add 1 cup of vinegar and bring the water to a boil. Once the mixture is boiling, remove the pan from the heat and add 2 tablespoons of baking soda. This will cause a fizzing reaction. Briefly mix the solution, then empty the pan. Use a non-abrasive sponge or scrubber to remove any remaining food particles. Finally, rinse and dry the pan.

An alternative method is to first sprinkle baking soda all over the affected area, then use a sponge to scour the inside of the pan. Once you've removed as much of the mess as you can, add a small amount of vinegar. The mixture should foam up immediately. Scrub thoroughly, then rinse and dry the pan.

Try Bar Keeper's Friend

If you're looking to remove burnt oil from your Gotham Steel pan, Bar Keepers Friend is a great product to try. It's a trusted brand with a range of cleaning products that have been around for over 100 years. Here's how you can use Bar Keepers Friend to tackle the burnt oil on your pan:

Step 1: Choose the Right Bar Keepers Friend Product

Bar Keepers Friend offers a variety of cleaning products, including powdered cleansers, liquid cleansers, and soft cleansers. For removing burnt oil, the powdered cleanser or the liquid cleanser would be ideal. You can purchase these products online or at your local hardware store.

Step 2: Prepare the Cleaner

If you're using the powdered cleanser, sprinkle a small amount onto the burnt areas of your pan. If you're using the liquid cleanser, apply a few drops directly onto the affected areas. You can also dampen a sponge or cloth with the liquid cleanser.

Step 3: Apply the Cleaner

Using a damp sponge or cloth, gently rub the cleanser onto the burnt areas of your pan. Apply light pressure and work the cleanser into the surface. You can let the cleanser sit for a few minutes to allow it to penetrate the burnt oil.

Step 4: Rinse and Repeat

After a minute or so of scrubbing, rinse the pan with warm water to remove the cleanser. If the burnt oil is still visible, repeat the process. You may need to do this multiple times, depending on the severity of the burn.

Step 5: Buff and Shine

Once you've removed the burnt oil, use a soft cloth to buff the surface of your pan to a shine. This will help restore the original appearance of your Gotham Steel pan.

Bar Keepers Friend is a gentle yet effective cleaner that can tackle even the toughest stains. It's important to follow the instructions on the product label and always test a small area first to ensure it's safe for your pan. With a bit of elbow grease and the right tools, you can say goodbye to those stubborn burnt oil stains!

Use a dishwasher tablet

Using a Dishwasher Tablet to Clean a Burnt Gotham Steel Pan

Dishwasher tablets can be an effective way to clean a burnt Gotham steel pan. Here is a step-by-step guide on how to use one to remove burnt oil:

• Fill the pan with water: Fill the pan with enough water to cover the burnt areas.
• Add a dishwasher tablet: Place the pan on a stove and heat it at a low to medium setting. Once the water is warm, drop in a dishwasher tablet.
• Simmer the water: Let the water simmer for about 10 minutes. This will help to loosen the burnt oil and grime.
• Rinse and wipe the pan: After simmering, rinse the pan with water and wipe away any residue using a soft sponge or cloth.
• Wash as normal: Finally, wash the pan as you usually would with warm, soapy water.

Alternatively, you can try the following method:

• Wet the dishwasher tablet: Wet the dishwasher tablet with warm water.
• Scrub the pan: Start scrubbing the bottom of the pan with the wet dishwasher tablet, focusing on the burnt areas. Be sure to wear gloves during this step.
• Heat the water: If the tablet is not breaking down, heat the water a bit more.
• Scrub in circular motions: As the tablet starts to break down, scrub the pan in circular motions, going over the burnt parts.
• Rinse the pan: Once the tablet has completely dissolved and the burnt marks have been removed, rinse the pan.
• Wash with soapy water: Finally, wash the pan with hot, soapy water as you normally would.

It is important to note that dishwasher tablets may not always be effective for removing all burnt marks, and some pans may require additional scrubbing. Additionally, using a whole dishwasher tablet for a single pan may not be the most environmentally-friendly option, so it is recommended to try this method as a last resort for stubborn stains.

Boil water and baking soda in the pan

Boiling water and baking soda in the pan is an effective way to remove burnt oil from a Gotham Steel pan. Here is a step-by-step guide:

• Add a small mound of baking soda to the centre of the pan. Use about a 1/4 cup of water for a standard-sized pan, and adjust the amount of water if your pan is larger or smaller.
• Bring the water and baking soda mixture to a boil. As the water boils and evaporates, it will leave a film of baking soda around the walls of the pan.
• When most of the water has boiled off, turn off the heat. It is best to do this while the pan is still hot, so use oven mitts or gloves to handle the pan.
• Use a long-handled brush or scouring pad to scrub off the burnt oil. A fresh Scotch-Brite scouring pad or sponge is recommended for removing stains.
• Rinse the pan with warm water and dry it thoroughly with a clean towel.

This method is particularly effective for freshly scorched pans, but it may not be as successful for removing burnt oil that has accumulated over time. For more stubborn stains, you can try repeating the process, allowing the baking soda mixture to sit for longer, or using a more intensive cleaning method.

Submerge the pan in boiling water and baking soda

To remove burnt oil from a Gotham steel pan, one method is to submerge the pan in boiling water and baking soda. This method is also suitable for removing years of burned-on stains from both sides of a pan.

First, fill a large pot, such as a stock pot, with water and place the Gotham steel pan inside, ensuring it is fully submerged. Bring the water to a boil. Next, add 1/4 to 1/2 cup of baking soda to the pot and reduce the heat to a gentle boil. Allow the pan to boil gently for 15 to 30 minutes. As the water evaporates and the pan is still hot, scrub off the film of baking soda and burnt oil with a scrubby sponge or kitchen scrub brush.

For any lingering, stingy stains, create a paste or slurry by adding more baking soda and water to the pan. Scrub away the remaining stains.

This method is suitable for removing burned-on stains from stainless steel, ceramic, and cast iron pans. However, when cleaning cast iron pans, it is important to refrain from using soap, vinegar, or lemon juice, as these can create rust and destroy the pan's seasoning.

Frequently asked questions