Hanging Pans On Walls: Creative Ways To Display Cookware

Hanging pots and pans on your kitchen wall frees up cabinet space and turns your cookware into kitchen decor. There are various ways to hang your pots and pans on the wall, including using a wall-mounted rack, pot rails, individual hooks, or a pegboard. When hanging your pots and pans, it is important to consider the weight of the items and ensure that they are securely mounted, preferably to wall studs for optimum support.

Using hooks and rails

Hanging your pans on the wall with hooks and rails is a great way to save cupboard space and show off your cookware. This method is also practical, as it keeps your pans within easy reach while cooking.

First, you'll need to decide on the type of rail you want. A popular option is the rail-and-S-hook system, where S-shaped hooks are placed on a rail to hang your pans. You can also buy rails that come with built-in hooks. Rails are available in a variety of sizes and materials, including stainless steel and wrought iron. Make sure to measure the space you want to hang your rail on and choose a rail that is an appropriate size.

Once you've chosen your rail, you'll need to install it on the wall. For this, you'll need to use a stud finder to locate the studs in your wall and then drill into them to secure the rail. If you're renting and don't want to drill into your walls, there are alternative options, such as using a tension rod or adhesive racks.

After your rail is installed, you can start hanging your pans. If you're using S-hooks, space them evenly along the rail and hang your pans by their handles. If your rail has built-in hooks, simply hang your pans on the hooks. You can also use this system to hang other kitchen utensils, such as spatulas and whisks.

By using hooks and rails, you can easily and attractively hang your pans on the wall, creating a functional and stylish addition to your kitchen.

Wall-mounted shelves

To achieve optimum support, it is recommended to mount shelves directly onto wall studs. If this is not possible, you can use drywall anchors or hollow-wall anchors. Use a stud finder to locate the studs behind your desired shelf location. If you are using drywall anchors, mark the wall with pencil inside the bracket holes so you know where to insert the screws. Drill starter holes with a screwdriver or power drill on the lowest speed setting, but do not twist the screws all the way in. Install the anchors, then re-insert the screws and tighten until the brackets are secure.

If you are using hollow-wall anchors, you will need to choose an anchor that matches the thickness of your drywall or plaster. Drill holes according to the instructions, then fold the wings of the anchor so that it fits through the hole. Press the anchor into the hole, tapping it with a hammer if necessary, until it is fully seated. Use the included tool to expand the wings behind the drywall or plaster, then insert the screws.

When hanging pans on a wall-mounted shelf, you can simply place them directly on the shelf or use S-hooks or other types of hooks attached to the shelf to hang them. This will depend on the specific type of shelf and your personal preference.

Hanging pots and pans from a ceiling rack

For a DIY option, you can install a metal grate, iron fence section, or a steel or copper plumbing pipe on your ceiling. Ensure the structure is securely mounted, and then hang your pots and pans from S-hooks attached to the frame.

If you prefer a store-bought option, there are many ceiling racks available online and in stores. Here are some examples:

• KES 34-Inch Hanging Pot Rack with 20 S-Hooks
• Ebern Designs Hanging Pot Rack with two chains and S-hooks
• VDOMUS Hanging Pot Rack - a rustproof, wall-mounted option with 15 hooks
• OROPY 38-inch Pot Bar Rack with 14 S-hooks
• G-TING Hanging Pot Rack with 8 hooks and two DIY methods for installation

When installing a ceiling rack, it is important to ensure that it is securely mounted to support the weight of your pots and pans. Always follow the manufacturer's instructions and recommendations for installation.

Hanging pots and pans from a pegboard

To hang a pegboard, you'll need a few basic tools, such as a drill and a tape measure. You can also get your local hardware store to cut the pegboard and wood to the required size. Here's a step-by-step guide:

Step 1: Paint the Pegboard and Planks

Coat the pegboard and planks with paint or clear polyurethane. This step is crucial even if you want to keep the natural colour of the pegboard. The coating will seal the surface and prevent water damage. Don't forget to paint the top of each plank, as it will be visible through some of the holes in the pegboard. Use a wooden skewer to remove any paint that clogs the holes. Let everything dry for at least 24 hours.

Step 2: Attach the Pegboard to the Planks

Line up the planks with the pegboard. You'll need at least two planks, one for each side, to provide stability and serve as anchor points for mounting. For larger pegboards, consider adding a third plank in the middle for additional support. Use a drill and brass wood screws to attach the pegboard to the planks.

Step 3: Mark the Mounting Position

Hold the assembled pegboard against the wall and mark the corners with a pencil to indicate where you want it to go.

Step 4: Drill Holes and Insert Anchors

With a friend's help, drill four holes through the pegboard and plank into the wall, one in each corner near the brass screw. Move the pegboard aside and push an anchor into each hole.

Step 5: Hang the Pegboard

Ask your friend to hold the pegboard in place again while you drill screws through the board into each anchor.

Step 6: Touch-ups and Accessories

Touch up the paint to cover the screw heads. Now, add hooks, shelves, and baskets to organise and decorate your pegboard.

For a stronger installation, use metal wall anchors that can bear more weight, especially if you plan to hang heavier items like cast iron pans. Additionally, consider the type of wall you're drilling into. Drywall is the easiest, but if you're dealing with plaster or brick, you'll need a special drill bit.

With these steps, you can create a functional and stylish pegboard to hang your pots and pans, just like culinary legend Julia Child!

Hanging pots and pans inside a pantry

One option is to use a wall-mounted pot rack. These racks come in various shapes, including shelves, half-circles, and bonnets, and are usually made from metal or wood. S-hooks are then fitted over the frame or spokes, allowing you to hang your pots and pans. If you're handy, you could even make your own DIY version by installing a metal grate or iron fence section on the wall of your pantry and hanging S-hooks from it.

Another option is to use pot rails, which are slender metal bars that can be mounted on the wall. These rails typically come with matching brackets or shaped ends with pre-drilled holes that serve as built-in brackets. You can also use a sturdy metal or porcelain towel bar as a pot rail or fashion your own from steel or copper plumbing pipe. Don't forget to ensure the bar is slender enough to hold S-hooks!

If you're looking for a more unconventional method, consider using heavy-duty C- or U-hooks that screw directly into the wall at the studs. Sturdy, double-hook coat hooks are another option. You can also paint a long, narrow plank to match your pantry walls and install hooks along its length to hang your pots and pans.

Lastly, you can try using a pegboard, which is a versatile option that can be cut to fit your space. Simply screw the pegboard into the wall studs and add hooks to hang your pots and pans.

When hanging your pots and pans, it's important to consider the weight of the items and ensure that your chosen method can support the weight. It's also a good idea to measure your space and plan out the layout before installing any racks or hooks to ensure they fit properly and are installed securely.

Frequently asked questions