Removing Burned Tomatoes From Revere Ware Copper-Bottomed Pans

If you've burned tomatoes in your Revere Ware copper-bottomed pan, don't panic! There are several methods you can use to clean it. Firstly, it's important to note that you should never use steel wool, SOS pads, or Brillo pads on your Revere Ware as they will cause corrosion. Instead, try filling the pan with water and adding a generous amount of automatic dishwasher detergent and vinegar. Bring this to a boil and let it boil for 15 minutes to half an hour. The burned residue should then simply slide off the pan. Alternatively, you can use a combination of lemon and salt, or vinegar and salt, to remove heat discolouration from the copper bottom. Simply sprinkle salt on the pulp of the lemon or the vinegar and rub it lightly over the bottom of the pan. You can also try an overnight soak with household ammonia to loosen burnt-on food, or scrub the pan with Bar Keepers Friend and a stainless-steel scrubber.

Soak in hot water and mild dish detergent

To remove burned tomatoes from your Revere Ware copper-bottomed pan, one method you can try is to soak it in hot water and mild dish detergent.

First, empty any leftover food from the pan. Then, fill your sink with hot water and add 1-2 tablespoons of a mild dish detergent. Submerge the cooled pan in the soapy water and let it soak for 5 to 10 minutes. If the burnt-on residue is particularly stubborn, you can let it soak for longer.

After soaking, try to remove the burned tomatoes with a sponge. If they are still stuck on, use a nylon scouring pad to scrub the pan gently. Be careful not to use steel wool or harsh abrasives as these can damage the pan.

Once the burned tomatoes have been removed, rinse the pan thoroughly with water and dry it with a towel.

If there is any discolouration on the copper bottom, you can restore its shine with a copper polish such as Wright's copper cleaner or Kleen King. Apply the polish with a damp sponge and work it into the copper until the discolouration disappears.

Use a nylon scouring pad

If you've burned tomatoes in your Revere Ware copper-bottomed pan, don't panic! Here's a step-by-step guide on how to tackle the problem using a nylon scouring pad:

Firstly, it is important to note that you should never use steel wool, SOS pads, or Brillo pads to clean your Revere Ware, as these can cause corrosion and leave behind residue. Instead, opt for a nylon scouring pad, which is gentle yet effective.

Start by filling your sink with hot water and adding a mild dish detergent—about 1 to 2 tablespoons should be enough. Empty any leftover food from the pan and allow it to cool before submerging it in the soapy water. If the pan is very dirty, let it soak for 5 to 10 minutes.

Now, it's time to tackle the burned tomatoes. Using your nylon scouring pad, gently scrub the affected areas. The nylon material will help lift away the burnt residue without damaging the copper bottom. Pay close attention to the corners of the pan, as they can be tricky to clean thoroughly.

Once you've removed the burnt tomatoes, rinse the pan with water and dry it thoroughly with a soft towel. It's important to dry the pan completely to prevent water spots and keep your Revere Ware looking its best.

If, after scrubbing, there are still some stubborn burnt-on stains, you can try a different approach. Create a mixture of vinegar and salt, or use lemon and salt instead. Sprinkle the salt onto the lemon or apply vinegar to the salt, and then gently rub this mixture over the affected areas. This natural solution will help to remove any remaining heat discolouration and restore the shine to your copper bottom.

Remember, Revere Ware is designed to be durable and long-lasting, so don't be afraid to give it a good scrub. With the right tools and techniques, your copper-bottomed pan will be looking like new again in no time!

Rinse and dry with a towel

Rinsing and drying your Revere Ware copper-bottomed pan is an important step in the cleaning process. After you have removed the burned tomatoes, it is crucial to rinse the pan thoroughly with water. Make sure to use hot water for this step, as it will help to eliminate any remaining food particles or residue.

Once you have rinsed the pan, it is now time to dry it. Grab a clean towel and dry the pan thoroughly. Ensure that you dry both the inside and outside of the pan, including the copper bottom. It is important to dry the pan completely to prevent water spots and maintain the pan's appearance.

If you notice that the outside of your Revere Ware looks dull, you can restore its shine with a stainless steel polish. However, avoid using steel wool or harsh abrasives, as these can damage the cookware. Instead, opt for a soft cloth or sponge when applying the polish.

Additionally, remember to always wash your Revere Ware by hand. While it may be tempting to put it in the dishwasher, doing so can damage the Bakelite parts and cause them to lose their gloss over time. Proper rinsing and drying by hand will help ensure the longevity and aesthetic appeal of your copper-bottomed pan.

Restore shine with stainless steel polish

To restore the shine of your Revere Ware copper-bottomed pan, you can use a variety of methods and products. Here are some detailed steps to guide you through the process:

Cleaning the Pan

Before polishing, it is important to ensure that the pan is clean and free of any stuck-on food or residue. Wash the pan with soap and water using an acrylic scrubbing sponge or a Scotch-Brite pad for more scrubbing power. Revere Ware recommends scouring new pans thoroughly before the first use as there may be packing dust or buffing oils present.

Removing Burned-On Food

If there is burned-on food inside the pan, fill the pan with water, add a generous amount of automatic dishwasher detergent and some vinegar, and bring it to a boil. Let it boil for 15 minutes to half an hour, and then use a utensil to poke at the burned-on food to see if it has loosened.

Restoring Shine with Stainless Steel Polish

Once the pan is clean and free of burned-on food, you can restore its shine using a variety of methods:

• Bar Keepers Friend: Apply a small amount of this cleanser to a soft scrub sponge and spread it all around the sides and bottom of the pan. Let the cleanser sit for a while, and then scrub it around. Rinse the pan after scrubbing. For more scrubbing power, make a paste out of baking soda and water and use this to scrub.
• Lemon and Salt or Baking Soda: Sprinkle salt on the pulp of a lemon and rub it lightly over the copper bottom. Alternatively, you can scrub the pan with a mixture of lemon and salt or baking soda and elbow grease.
• Vinegar and Salt: Spray vinegar onto the copper bottom, liberally sprinkle salt on it, apply some vinegar to a scrubbing sponge, and scrub away. The salt and vinegar will react to remove copper oxidation.
• Wright's Copper Cleaner or Kleen King: Wet a sponge and work the copper with the cleaner in paste form. For Kleen King, apply it to the sponge, add a little water, and work it into a paste.
• Natural Polishing Solutions: For minor scratches, apply baking soda to a damp cloth and rub it onto the pan, going with the grain of the steel. You can also use a combination of vinegar and water to polish the pan. Combine one part vinegar with eight parts water, spray it on the pan, and let it sit for five minutes before rinsing or wiping it with a damp cloth. After the pan dries, sprinkle it with olive oil and wipe it with a clean cloth.
• Dish Soap and Baby Oil: Clean the pan with a small amount of dish soap mixed with water, and then apply a light coat of baby oil and polish.

Avoid using steel wool

To remove burned tomatoes from your Revere Ware copper-bottomed pan, it is important to avoid using steel wool. While steel wool can be effective for removing burnt-on food, it is not recommended for Revere Ware as it can cause corrosion and leave behind tiny particles that can be difficult to remove. Instead, there are several alternative methods you can use to safely and effectively clean your pan.

One option is to use a mild abrasive cleaner, such as Bar Keepers Friend, which is specifically designed for heavy-duty cleaning without causing damage. Apply a small amount of the cleaner to a soft scrub sponge and gently work it into the affected areas of the pan. Allow the cleaner to sit for a few minutes to penetrate the burnt residue, and then scrub the area with the sponge. You can also try using a stainless-steel scrubber for more scrubbing power, but be cautious as this may scratch the surface.

Another natural alternative is to create a paste or mixture using household items such as baking soda, lemon, or vinegar. For example, you can sprinkle salt on half a lemon and gently rub it over the burnt areas of the pan. You can also try mixing vinegar and salt or sour milk and salt as a substitute for lemon. These natural mixtures can effectively remove heat discoloration and burnt residue without damaging the copper bottom.

Additionally, you can try boiling water in the pan with a generous amount of automatic dishwasher detergent and vinegar. Allow the mixture to boil for 15 to 30 minutes, and then use a spatula or wooden spoon to gently remove any loosened residue. This method is effective for cleaning both the inside and outside of the pan.

Remember to always wear gloves when handling cleaning products and to rinse the pan thoroughly with hot water after cleaning to remove any residual cleaner. Proper care and maintenance of your Revere Ware copper-bottomed pan will ensure its longevity and keep it looking like new.

Frequently asked questions