Instant Pot Pan: Dishwasher-Safe?

The Instant Pot is a popular kitchen appliance that can be used for a variety of cooking tasks, from pressure cooking to sautéing. With its stainless steel inner pot, lid, sealing ring, and steam rack, it is a durable and versatile tool for any home cook. But what about cleaning? Can the Instant Pot pan be safely washed in a dishwasher?

The good news is that the Instant Pot is dishwasher-friendly. Most parts of the appliance, including the inner pot and lid, are safe to be placed in the dishwasher. However, it is important to note that the outer unit, which includes the heating element, should not be submerged in water as it can damage the unit. Instead, it is recommended to wipe it clean.

When it comes to the lid, it can be washed in the dishwasher, but it is important to first disassemble its parts. The anti-block shield, float valve, and pressure-release knob are all dishwasher-safe. However, due to their small size, it is recommended to hand-wash these parts separately and place the lid itself in the dishwasher's top rack.

The inner pot is dishwasher-safe

The inner pot of the Instant Pot is dishwasher-safe. This includes the stainless steel inner pot, which is durable and can withstand the heat from the dishwasher's lower rack. The inner pot is made of sturdy, food-grade stainless steel (304 - 18/8) and is entirely dishwasher-safe. You can also scrub it by hand or soak it in a vinegar and water solution to remove any white deposits from high-protein foods.

The inner pot is not the only part of the Instant Pot that is dishwasher-safe. The lid, sealing ring, and steam rack can also be placed in the dishwasher. However, it is important to remove the sealing ring and anti-block shield from the lid to ensure a thorough clean. These smaller parts are safe to put in the dishwasher but may be better cleaned by hand to ensure they are not lost in the machine.

The cooker base, which contains the microprocessor and heating element, should not be placed in the dishwasher. It is important to keep this part dry and to only wipe it down with a damp cloth if necessary.

The Instant Pot is a convenient appliance for cooking a variety of dishes, and its dishwasher-safe features make it easy to clean and maintain.

The lid can be washed in the dishwasher

The Instant Pot lid can be washed in the dishwasher, but it is important to take certain steps to ensure that it is cleaned effectively and safely. Firstly, it is recommended to disassemble the lid into its component parts before placing it in the dishwasher. The lid consists of several small parts, including the anti-block shield, float valve, pressure-release knob, and sealing ring. These parts are all dishwasher-safe and can be placed in the dishwasher; however, due to their small size, it is advisable to place them in a dishwasher-safe bag or the cutlery basket to prevent them from falling to the bottom of the dishwasher. Alternatively, these small parts can be hand-washed to ensure a thorough clean.

When disassembling the lid, it is important to take note of the order in which the parts are removed and to understand how to reassemble them properly. Firstly, remove the float valve by locating the silicone cap on the bottom side of the lid and pulling it out, then pushing the float valve through to the other side. Next, remove the sealing ring by carefully peeling it away from behind the sealing ring rack. The sealing ring should be replaced every 12 to 18 months, or sooner if cracks, leaks, or deformation occur. It is also recommended to use separate sealing rings for sweet and savory dishes to prevent odours from transferring between dishes.

After removing the sealing ring, the anti-block shield can be taken out. This part should be cleaned after each use, especially after preparing foods that may splatter. To remove the anti-block shield, place your thumbs on the side of the shield and push it upwards towards the rim of the lid, then lift it out. The anti-block shield can be washed with warm, soapy water, rinsed, wiped dry, and placed back in position once dry. Finally, the pressure-release knob, or the sealing or venting switch, can be removed. However, it is important to note that this part may not be removable on all models.

Once all the small parts have been removed and cleaned, either by hand or in the dishwasher, they should be allowed to dry completely before reassembling them onto the lid. Reassembling the lid requires careful placement of each part in the correct position. Firstly, insert the float valve into the lid opening, ensuring the smaller hole is facing upwards. Then, flip the lid over and insert the silicone cap. Next, take the clean and dry sealing ring and place it over the sealing ring rack, gently pressing it into place with your fingers. Ensure that it is centred and can still move freely. Finally, install the anti-block shield by placing it over the prongs and pressing it down until it clicks into place.

The sealing ring can go in the dishwasher

The sealing ring is a critical component of your Instant Pot, so it's important to keep it clean and well-maintained. The good news is that the sealing ring can be cleaned in the dishwasher, saving you time and effort.

The sealing ring is made of high-quality, heat-resistant silicone, which is dishwasher-safe. To clean the sealing ring in the dishwasher, simply remove it from the small hook rack holding it in place. Be gentle when removing the sealing ring, as pulling it out too forcefully could tear it. Once removed, place the sealing ring on the top rack of your dishwasher and run a wash cycle.

After the cycle is complete, carefully inspect the sealing ring for any signs of damage, such as cracks or tears. If the sealing ring shows any signs of wear and tear, it's important to replace it with a genuine Instant Pot sealing ring. Using sealing rings from other brands may void your Instant Pot warranty.

While the sealing ring can be cleaned in the dishwasher, some people prefer to hand-wash it with warm, soapy water. This can help extend the life of the sealing ring and prevent stretching or discolouration. It is recommended to replace the sealing ring every 12-18 months, or when signs of wear and tear are noticed. Additionally, some users prefer to have separate sealing rings for savoury and sweet dishes, as silicone may absorb food odours during cooking.

The float valve is dishwasher-safe

The float valve is one of the smaller components of the Instant Pot lid, and it is dishwasher-safe. However, it is recommended that you hand-wash these smaller parts, as they can be hard to find if they fall to the bottom of the dishwasher. The float valve is also very easy to clean by hand.

To clean the Instant Pot lid effectively, you need to dismantle its parts and clean them individually. To remove the float valve, look on the bottom side of the lid for a silicone cap. Remove the cap by pulling it out, then push the float valve through to the other side. Once the float valve is removed, you can either place it in the top rack of the dishwasher or wash it by hand in the sink.

The Instant Pot is dishwasher-friendly, and the lid can be safely cleaned in a dishwasher. However, it is important to note that the cooker base, which contains the microprocessor and heating element, should not be placed in the dishwasher. If the cooker base gets wet, allow it to dry completely.

The Instant Pot is a handy appliance that can save you time in the kitchen. With its various parts, it is designed to eliminate the need for several separate appliances, such as a pressure cooker, rice cooker, and steamer. The stainless-steel inner pot, the lid, the sealing ring, and the steam rack are all dishwasher-safe.

To ensure a thorough cleaning of the lid, it is recommended to remove the sealing ring and the anti-block shield. The anti-block shield should be washed after each use, especially after preparing foods that may splatter. It is also important to note that the sealing ring should be replaced every 12-18 months, or when cracks or other damage is noticed.

The anti-block shield is dishwasher-safe

To remove the anti-block shield, place your thumbs on either side of it and push it towards the rim of the lid. It may require a bit of force, but the shield should pop out. Once removed, wash the shield with warm, soapy water, rinse it, and then wipe it dry with a soft cloth. When it's dry, place it back in position by pushing it down.

While the anti-block shield is dishwasher-safe, hand-washing is recommended for two reasons. Firstly, because it's a small part, it may fall to the bottom of the dishwasher during a cycle. Secondly, hand-washing ensures a more thorough clean. However, if you wish to use the dishwasher, place the anti-block shield in the dishwasher's cutlery basket.

Frequently asked questions