Effective Shower Pan Cleaning With Norwex Products

Norwex is a company that sells cleaning products through Norwex consultants. The company offers a range of cleaning products that are safe, environmentally friendly, and effective. One of their popular products is the Norwex Cleaning Paste, which is a versatile cleaner that can be used on various surfaces, including shower pans, without causing damage. The paste is known for its ability to cut through tough, baked-on, and stuck-on grime, removing stains and leaving surfaces clean and shiny. It is also long-lasting, as a little goes a long way. In addition to the Cleaning Paste, Norwex offers other products like the Bathroom Cleaner, which is effective at removing hard water build-up and soap scum, and a range of microfiber cloths that can be used for various cleaning tasks, including deep cleaning.

How to clean a porcelain bathtub with Norwex

Norwex's Cleaning Paste is a powerful cleaner that can be used to clean a porcelain bathtub. Here is a step-by-step guide on how to effectively clean your porcelain bathtub using Norwex products:

Step 1: Prepare the Cleaning Paste

The Norwex Cleaning Paste is a solid, compact cleaner. To use it, dampen a Norwex Enviro Cloth or Spirisponge with water. Then, rub the cloth or sponge on the Cleaning Paste to pick up a small amount of the paste. You only need a couple of dabs, as a little goes a long way with this product.

Step 2: Apply the Cleaning Paste to the Bathtub

Using the cloth or sponge, rub the Cleaning Paste onto the surface of the porcelain bathtub. Focus on areas with stains, soap scum, or build-up. You can also use the paste to clean the fixtures and faucets in your bathtub.

Step 3: Rinse and Dry

Once you have applied the Cleaning Paste and scrubbed the desired areas, rinse the bathtub with water. Use a clean Enviro Cloth to dry the surface. You can also use the Norwex Window Cloth to polish the bathtub for an extra shine.

Tips and Precautions:

• The Norwex Cleaning Paste is safe to use on porcelain surfaces but avoid using it on acrylic, brass, copper, or silver surfaces as it may cause scratching. Always test the paste on an inconspicuous area first.
• For tough stains or build-up, you can use the Cleaning Paste with the Norwex Bathroom Scrub Mitt for extra scrubbing power.
• The Cleaning Paste can also be used to clean other areas of your bathroom, such as the sink, countertop, mirror, and floor.
• Norwex also offers other products like the Descaler and Blue Diamond All-In-One Cleaner, which can be used to remove soap scum and hard water stains from your bathtub.

By following these steps and using Norwex's Cleaning Paste, you can effectively clean your porcelain bathtub, leaving it sparkling and fresh. Remember to always test the products on a small area first and follow the specific instructions and precautions for each Norwex product. Enjoy your clean and refreshed bathtub!

How to clean a plastic bathtub with Norwex

Norwex's mission is to "improve quality of life by radically reducing the use of chemicals in personal care and cleaning." The company offers a range of cleaning products that are safe, effective, and environmentally friendly. Here are some tips on how to clean a plastic bathtub using Norwex products:

Step 1: Prepare the Bathtub

Before beginning the cleaning process, ensure that you have all the necessary Norwex products and that the bathtub is ready for cleaning. This includes removing any bath products, toys, or other items from the tub and giving the tub a quick rinse to remove any loose dirt or debris.

Step 2: Apply the Cleaning Paste

Norwex Cleaning Paste is a powerful yet gentle cleaner that can be used on a variety of surfaces, including plastic bathtubs. To use the paste, simply dampen a Norwex Microfiber EnviroCloth and rub it onto the surface of the paste a few times to pick up a small amount. Then, apply the paste to the bathtub, using a gentle scrubbing motion. The paste will help to break down any soap scum, dirt, or stains that may be present.

Step 3: Scrub the Bathtub

For best results, use a Norwex Bathroom Scrub Mitt or Spirisponge in conjunction with the EnviroCloth and Cleaning Paste. The scrub mitt and Spirisponge are designed to provide extra scrubbing power without damaging the surface of the tub. Pay special attention to any problem areas, such as stubborn stains or areas with built-up soap scum.

Step 4: Rinse and Dry

Once you have thoroughly scrubbed the bathtub, it is important to rinse away any remaining cleaning paste. Use fresh water and a clean EnviroCloth to wipe down the tub, ensuring that all residue is removed. Finally, use a Norwex Window Cloth to dry the tub and give it a sparkling finish.

Additional Tips:

• Norwex's Descaler is a great product to use in conjunction with the Cleaning Paste for removing tough soap scum, lime, calcium, and rust stains. Simply spray the affected areas, let it sit for 5-10 minutes, and then scrub with the Cleaning Paste.
• For regular maintenance, the EnviroCloth and Window Cloth duo are excellent for keeping your plastic bathtub clean and streak-free. The EnviroCloth can be used with just water to wipe down the tub, and the Window Cloth will give it a polished finish.
• Always test new products on a small, inconspicuous area first to ensure they won't cause any damage or discolouration.
• Norwex products are designed to be gentle yet effective, so there is no need to scrub aggressively. Let the products do the work for you!

How to clean a tiled shower pan with Norwex

Norwex's mission is to "improve quality of life by radically reducing the use of chemicals in personal care and cleaning." Their products are environmentally and skin-friendly, and safe for use on most surfaces.

Step 1: Prepare the shower pan

Before you begin cleaning, ensure that the shower pan is dry. If it is wet, use a dry Norwex cloth to wipe down the surface.

Step 2: Apply the Norwex Cleaning Paste

The Norwex Cleaning Paste is a powerful cleaner that can be used on a variety of surfaces, including chrome, stainless steel, aluminum, porcelain, and glass. It is important to note that this product should not be used on brushed stainless steel, brushed nickel, pewter, acrylic, wood, brass, copper, silver, or acrylic surfaces as it may cause scratching.

To use the paste, dampen a Norwex Enviro Cloth and gently rub it onto the surface of the shower pan. You only need a small amount of the paste—a couple of dabs will go a long way!

Step 3: Scrub the shower pan

Once you have applied the paste, use the Enviro Cloth to scrub the surface of the shower pan. For tougher stains, you can use the Norwex Spirisponge or the Bathroom Scrub Mitt, which is great for getting into hard-to-reach areas.

Step 4: Rinse and dry

After scrubbing the shower pan, rinse it with water to remove any remaining paste and dirt. Finally, use a clean Enviro Cloth to dry the surface.

Additional tips:

• For extra shine and polish, finish off by wiping down the shower pan with a Norwex Window Cloth.
• If you are concerned about scratching, test the paste on a small, inconspicuous area first.
• The Norwex Descaler is also great for removing tough soap scum, lime, calcium, and rust stains from shower pans. Simply spray it on, let it sit for 5-10 minutes, and then wipe it down with a damp Enviro Cloth.

By following these simple steps, you can effectively clean your tiled shower pan using Norwex products, leaving it sparkling clean and free of harsh chemicals!

How to clean a shower door with Norwex

Keeping your shower door clean can be a chore, but Norwex products can make it easier. Here's how to clean a shower door with Norwex:

Step 1: Choose the Right Norwex Product

Norwex offers a range of cleaning products that are safe and effective for shower doors. The Norwex Bathroom Cleaner (formerly known as the Blue Diamond Cleaner) is a popular choice. It is a concentrated, all-in-one gel that can be used straight from the bottle or diluted in a spray bottle. It is designed to remove hard water build-up, soap scum, grease, and stains from shower doors and other bathroom surfaces.

Another option is the Norwex Cleaning Paste, which can be used to remove soap scum, hard water stains, and other grime from shower doors. The paste comes in a tub, and you only need a small amount to clean effectively.

Step 2: Prepare the Surface

If you are using the Norwex Bathroom Cleaner, start by emptying as much water as possible from the shower. This will ensure that the cleaner can work more effectively.

Step 3: Apply the Norwex Product

If using the Norwex Bathroom Cleaner, squirt a stream of the cleaner under the rim of the shower door and let it run down to coat the entire surface. If using the Norwex Cleaning Paste, wet a Norwex Microfiber cloth (EnviroCloth) and wipe it across the top of the paste a few times, then rub it onto the shower door.

Step 4: Let it Sit

Allow the Norwex product to sit on the surface for at least 10-15 minutes. This gives the ingredients time to break down any build-up and grime.

Step 5: Scrub Gently

After the product has had time to work, use a Norwex Spirinett, the scrubby side of the Norwex Bathroom Scrub Mitt, or a slightly abrasive sponge to gently scrub the shower door. Be careful not to scrub too hard, especially if you are cleaning porcelain, as this can cause scratches.

Step 6: Rinse and Admire

Rinse the shower door with water to remove any remaining product and dirt. Now you can admire your sparkling clean shower door!

By following these steps and using Norwex products, you can effectively clean your shower door without resorting to harsh chemicals. Not only will your shower look and smell fresh, but you'll also be creating a safer and healthier environment for you and your family.

How to clean a shower head with Norwex

Step 1: Inspect the Shower Head

Turn on the water and identify which holes seem to be blocked. Make sure that these holes are completely submerged when cleaning.

Step 2: Prepare the Cleaning Solution

Place a gallon-size plastic bag inside a pitcher, folding the edges of the bag around the outside of the container. Add 1/2 cup of baking soda to the bag. Then, slowly pour in 4 cups of white vinegar. You should witness a bubbly reaction. Add 1 cup of water to dilute the mixture.

Step 3: Submerge the Shower Head

Fully submerge the showerhead in the cleaning solution. If your showerhead is removable, take it out of the fixture and soak it in a separate bowl. Secure the bag around the neck of the showerhead using a zip tie or rubber band. Be mindful of the bag's weight; if need be, reduce the amount of cleaning solution to prevent overflow.

Step 4: Soaking Period

Allow the showerhead to soak for four hours or overnight.

Step 5: Wipe Down the Shower Head

After removing the bag, pour the liquid down the drain and turn on the water to check if the previously clogged jets have opened up. Use a dry Norwex Enviro Cloth to gently wipe down the showerhead and wash away any remaining mineral build-up or residue.

Routine Cleaning

For regular maintenance, fill a spray bottle with diluted vinegar and wipe down the showerhead during your standard cleaning process. This will help prevent mineral build-up and reduce the frequency of deep cleaning treatments.

When to Deep Clean

Aim to deep clean your showerhead once a month, or more/less frequently depending on the hardness of your water. Keep an eye out for clogged jets and address them promptly.

Frequently asked questions