Transmission Bolt Pan: Sizing Up The Task

The size of a transmission bolt pan varies depending on the make and model of the vehicle. For example, the bolt size for a BMW 7 Series - E65 / E66 (2002 - 2008) is M6x28.5, while the bolt size for a 2008 4L60E pan is 10mm x 1.5 thread pitch. The bolt size for a 1992 Ford F150 6cyl 4.9 custom is 8mm - 1.25 x 15 or 16. It is important to know the specific vehicle model when determining the correct bolt size for a transmission oil pan.

Bolt size for a 2002-2008 Dodge Ram 4.7L 4WD

The bolt size for a 2002-2008 Dodge Ram 4.7L 4WD transmission pan is 105 in-lbs. This information is specific to the 45RFE/545RFE/68RFE transmission model.

The transmission fluid capacity for this model is 6.5 quarts. The transmission fluid type is Mopar ATF+4 for all automatics. For a manual transmission, the fluid type is Mopar Manual Trans Lube (NV3500/NV5600). The transmission drain plug torque is 14-20 ft-lbs for the NV3500 manual, 25 ft-lbs for the NV4500 manual, 22 ft-lbs for the NV5600 manual, and 42 ft-lbs for the G56 manual.

The transmission pan bolt torque specifications are critical to ensuring a secure and proper fit for the transmission pan. It is important to refer to the correct specifications for your specific vehicle model and transmission type to ensure accurate maintenance and repairs.

In addition to the transmission pan bolts, there are other torque specifications for various components of the Dodge Ram 4.7L 4WD. For example, the wheel lug nut torque is specified at 95 ft-lbs for the 2005-2008 Ram 1500, 145 ft-lbs for the 2005-2008 Ram 2500, and 155 ft-lbs for the 2005-2008 Ram 3500.

Bolt size for a 4L60E transmission oil pan

The 4L60E transmission pan uses a 16-bolt pan, which is more than most other GM automatic transmissions. The bolt size is M8x1.25 or 8mm x 1.25 metric with a flanged head. The bolts are clear zinc-coated steel, Grade 10.9, JIS head, and are 16mm in length. The torque spec for the transmission oil pan bolts is 9 ft-lbs.

It is important to note that the stock pan bolts on a 4L60E transmission may vary in size. Some sources suggest that the stock pan bolts are M8x1.25, while others suggest that they are 10mm x 1.5. It is always a good idea to check the bolt size before ordering replacement bolts or making any modifications to the transmission.

Additionally, when replacing the transmission pan bolts, it is recommended to also replace the pan gasket. This will help ensure that there are no leaks and can prevent future issues.

The ICT Billet USA-made 4L60e 2004R PAN Bolt Set is a popular choice for replacing the transmission pan bolts on a 4L60E transmission. This set includes 16 bolts that are made from high-strength, grade 10.9 steel and are zinc-coated for corrosion protection. These bolts have received positive reviews from customers for their quality and ease of installation.

Bolt size for a 1992 Ford F150 6cyl 4.9 custom

The bolt pattern for the 1992 Ford F150 6cyl 4.9 custom depends on the specific model and sales distribution region.

The 1992 Ford F150 IX [1992-1996] 4.9 145 hp has a bolt pattern of 5x5.5 inches or 5x139.7mm. This means there are 5 lugs and the diameter of the circle that the lugs make up is 5.5 inches or 139.7mm.

The 1992 Ford F150 X (PN-96) [1997-2004] has a bolt pattern of 5x135mm, which is approximately 5x5.315 inches or 5x5 3/10 inches.

The 1992 Ford F150, along with other Ford F150 models manufactured between 1996 and earlier, had a large center bore of 4.25 inches (107.95mm). This was used to accommodate the 4wd hubs but was also used on 2wd vehicles. It is important to note that, despite having the same bolt pattern, Jeep and Dodge wheels will not fit on the 4wd Ford F150 due to this larger center bore.

Bolt size for a 7 Series BMW

The bolt pattern for the BMW 7 Series depends on the model year. The BMW 7 Series has two bolt pattern options: 5x112 and 5x120.

The BMW 7 Series models from 1977 to 2015 have a bolt pattern of 5x120. This includes the first five generations of the BMW 7 Series, from the E23 to the F01/F02/F03/F04.

From 2015 onwards, starting with the sixth generation (G11/G12), the bolt pattern changed to 5x112. This bolt pattern has been consistent for the sixth and seventh generations of the BMW 7 Series, including the facelift models.

It is important to verify the bolt pattern for your specific BMW model before making any wheel or tire-related purchases to ensure proper installation and safe driving.

Bolt size for a 2005 BMW 325xi

The bolt pattern for a 2005 BMW 325xi is 5x4.72, or 5 on 4.72. This means that each wheel has 5 bolts arranged in a circle with a diameter of 4.72 inches. The Pitch Circle Diameter (PCD) is the diameter of the circle that passes through the centre of all the studs, wheel bolts, or wheel rim holes. So, for the 2005 BMW 325xi, the PCD is 4.7 inches or 120 mm.

If you are planning on installing new wheels on your 2005 BMW 325xi, you will need a few other measurements besides the bolt pattern. These include the wheel size, stud size, wheel offset, centre bore, and manufacturer's torque specifications. The factory specifications for the 2005 BMW 325xi are as follows:

• Factory wheel size: 16 inches
• Stud size: M12 x 1.5
• Centre bore: 72.6 mm
• Wheel tightening torque: 115 Nm

It is important to have the correct measurements to ensure that your new wheels fit properly and are safe for driving.

Additionally, if you have aftermarket wheels with a different bolt pattern, you can adjust the 2005 BMW 325xi by installing wheel adapters. These adapters help convert the current lug pattern to match the PCD of the new wheels.

Frequently asked questions