Handgun Vs. Cast Iron: Can Bullets Pierce Pans?

Whether a handgun can shoot through a cast iron pan depends on several factors, including the type of bullet, the distance, the angle of the shot, and the thickness of the pan. While some claim that a cast iron pan will either stop a bullet or shatter into pieces, others argue that the bullet will simply pass through. It is generally advised that one does not use a cast iron pan as a target due to the potential risk of ricochet and the unpredictable nature of cast iron as a target.

Will a .22 short calibre bullet shot from a handgun penetrate a cast iron pan?

A cast-iron skillet is a must-have in any kitchen. It can cook up an egg for breakfast, sear a steak for dinner, and be used to bake cookies for dessert. But how does it fare against a .22 short calibre bullet?

The .22 Short is a variety of .22 calibre (5.6 mm) rimfire ammunition. It was developed in 1857 for the first Smith & Wesson revolver and was the first American metallic cartridge. The .22 Short was originally loaded with a 29 or 30 gr bullet and 4 gr of black powder. Today, the standard .22 Short bullet weighs 29 grains and is launched at 1,045 feet per second with 70 ft·lbf of energy from a 22-inch rifle barrel.

While cast iron skillets are known for their durability and strength, they are not bulletproof. A cast-iron skillet will not reliably stop a bullet and can be dangerous to rely on for protection. The bullet will likely penetrate the skillet, leaving a hole and causing the skillet to crack or warp.

However, a .22 short calibre bullet is smaller and has less energy and momentum behind it compared to larger calibre bullets. As a result, a cast-iron skillet may be more likely to stop a .22 short calibre bullet than a 9mm or .45 calibre bullet. The Mythbusters team found that cast iron skillets can stop low-calibre bullets but not larger calibre bullets.

Additionally, other factors such as the distance and angle of the shot, as well as the condition of the skillet, can affect the outcome. A new, undamaged skillet with a smooth surface is more likely to stop a bullet than an old, rusty one. The closer the shooter is to the skillet, the less time the bullet has to lose energy before impact. Similarly, a head-on impact allows the skillet to absorb the full force of the bullet, while an angled impact increases the likelihood of deflection.

In conclusion, while a .22 short calibre bullet shot from a handgun may penetrate a cast-iron pan, the outcome will depend on various factors such as the distance, angle, and condition of the skillet. It is important to remember that relying on household objects for protection against gunfire is not recommended and can be dangerous.

Will a 9mm bullet shot from a handgun penetrate a cast iron pan?

A cast-iron skillet is a must-have in any kitchen, but how does it fare against a 9mm bullet?

Theoretically, a cast-iron skillet can stop a bullet. Cast iron is incredibly dense, with an average density of between .29 and .35 g/cm and about 3/8″ – 1/2″ of steel on its surface area. This means it will be heavy enough to stop the bullet from penetrating. However, this is not something you should try, nor should you keep a cast-iron skillet as reliable protection against a potential gunshot.

Cast iron is incredibly brittle, and while it may stop low-caliber bullets, it will not work with larger calibers. It also depends on the quality of the metal, the speed of the bullet, and the distance from which the bullet was fired. A 9mm bullet can easily blast a hole through a cast-iron skillet, but two skillets together can stop pistol rounds.

The Mythbusters team tested this theory and found that a cast-iron skillet will stop low-caliber bullets but will not work with larger calibers. It is also important to note that a cast-iron skillet will likely take on some damage when hit with a bullet, so you will want to replace it if you plan to use it for protection.

In summary, while a cast-iron skillet may stop a 9mm bullet, it is not a reliable form of protection. The skillet will likely be damaged, and the outcome will depend on various factors such as the quality of the metal and the distance of the shot.

Will a .45 ACP bullet shot from a handgun penetrate a cast iron pan?

A cast iron skillet is a must-have in any kitchen. But how does it fare against the force of a bullet?

Theoretically, a cast-iron skillet can stop a bullet. Cast iron is incredibly dense, with an average density of between 0.29 and 0.35 g/cm and about 3/8"–1/2" of steel on its surface area. This means it will likely be heavy enough to stop the bullet from penetrating. However, this is not something you should ever try, as it is dangerous and could end up causing severe injury or even death.

The Mythbusters team practically tested whether a cast-iron skillet could stop a bullet. They found that it depends on the quality of the metal, the speed of the bullet, the distance from which the bullet was fired, and the type of bullet. They discovered that a cast-iron skillet will stop low-caliber bullets but will not work with larger calibers.

A 45 ACP bullet is a handgun cartridge designed by John Moses Browning in 1904 for use in his prototype Colt semi-automatic pistol. It has a standard-issue military round that uses a 230-grain (15-gram) round-nose bullet at approximately 830 feet per second (253 metres per second) when fired from a government-issue M1911A1 pistol.

A Reddit user tested whether a .45 ACP bullet could penetrate a cast iron pan. They found that the bullet did not punch any holes but left a few dents. Another user commented that cast iron is very brittle, so it will fracture eventually with anything much bigger.

Therefore, it is likely that a .45 ACP bullet shot from a handgun would be able to penetrate a cast iron pan, especially if the pan is thin or of low quality. However, this is not something that you should ever attempt, as it is extremely dangerous and could result in serious injury or death.

Will a .380 bullet shot from a handgun penetrate a cast iron pan?

It is important to note that cast iron skillets are not bulletproof and should never be relied on for protection against gunfire. While they are known for their durability and strength, they are not designed to stop bullets. Relying on household objects for protection is unsafe and unreliable.

That being said, a cast-iron skillet can theoretically stop a bullet. Cast iron is incredibly dense, with an average density between .29 and .35 g/cm and a surface area of 3/8"–1/2" steel. This means it may be able to stop a bullet from penetrating, especially if the bullet is smaller calibre and fired from a distance.

A .380 bullet is considered a small calibre bullet. It has been suggested that a a .380 bullet may be able to penetrate a cast-iron skillet, especially if it is hot-loaded or fired from close range. The distance and angle of the shot, as well as the condition of the skillet, will also affect its ability to penetrate. A new, undamaged skillet is more likely to stop a bullet than an old, rusty one due to its smoother surface.

In conclusion, while a .380 bullet may be able to penetrate a cast-iron skillet under certain conditions, it is not a guarantee. Cast-iron skillets are not designed to stop bullets and should not be relied upon for protection.

Will a .308 bullet shot from a handgun penetrate a cast iron pan?

It is important to note that cast iron skillets are not bulletproof and should not be relied on for protection against bullets. While cast iron skillets are known for their durability and strength, they are not designed to withstand gunfire.

That being said, a cast-iron skillet can theoretically stop a bullet. Cast iron is a dense material with an average density of .29 to .35 g/cm. This density means that a cast-iron skillet will likely be heavy enough to stop a bullet from penetrating, especially if the bullet is a smaller caliber, such as a .22 or .380. However, larger calibers, such as a 9mm or .45, are more likely to penetrate the skillet.

Additionally, the distance and angle from which the bullet is fired also play a role in whether or not it will penetrate the skillet. Bullets fired at close range are more likely to penetrate, as they have less time to lose energy before impact. Similarly, bullets that hit the skillet head-on are more likely to be stopped than those that hit at an angle, as a head-on impact allows the skillet to absorb the full force of the bullet.

In conclusion, while a .308 bullet is on the larger side, it is hard to say definitively whether or not it would penetrate a cast-iron skillet when fired from a handgun, as there are many factors at play, including the quality of the cast iron, the speed of the bullet, and the distance and angle of the shot. However, it is important to remember that a cast-iron skillet is not designed to stop bullets and should not be relied on for protection.

Frequently asked questions