Ella Walter
The Jeep Cherokee has been a popular vehicle for enthusiasts and mechanics to restore and modify. One common issue with these vehicles is rusted floor pans, which can be replaced with aftermarket parts or custom-made solutions. While there is some debate over the quality and price of OEM (Original Equipment Manufacturer) parts versus cheaper alternatives, it is unclear whether the floor pans for a 2-door Cherokee are different from those for other models.
| Characteristics | Values |
|---|---|
| Floor pan replacement | Available for Jeep Cherokee models manufactured between 1974 and 2001 |
| Floor pan plugs | Available |
| Price | $83.25 per unit |
| Shipping | $31.64 |
| Handling | $10.00 |
| Total | $208.14 |
Explore related products
What You'll Learn
Replacement floor pans for the Jeep Cherokee
If you're looking to replace the floor pans on your Jeep Cherokee, there are a few options available. It's important to note that the process may differ depending on the model year of your Cherokee, as well as whether it's a two-door or four-door model.
Classic 2 Current Fabrication offers replacement floor pans for Jeep Cherokees manufactured between 1974 and 2001. Their products are designed to fit various trim levels, including the base model, S (Sport), Chief, Golden Eagle, Golden Hawk, Limited, Classic, Sport, Pioneer, and Laredo. Classic 2 Current Fabrication prides itself on offering high-quality rust repair and replacement floor pans at competitive prices.
Another option is to purchase floor pans from Raybuck.com, which are made of 18-gauge steel and are considered high-quality, heavy pieces. These floor pans are more expensive, but they are designed to fit the 1984-2001 Jeep Cherokee models.
Alternatively, you can opt for cheaper floor pans from rock-auto, which are about half the price of the Raybuck pans. However, these may not be as pristine or durable as the more expensive options. Some Cherokee owners have also shared their experiences of making floor pans from old refrigerator and dryer side panels, stop signs, and even floor boards from junk yards.
When replacing the floor pans, it's important to consider the fitment and compatibility with your specific Jeep Cherokee model. Some Jeep vehicles may require the removal of the gas tank, which is typically located under the front seat, to complete the installation. Additionally, don't forget about the floor pan plugs, as finding the right ones can sometimes be a challenge.
The Best Grease-Busting Methods for Sparkling Clean Pans
You may want to see also
Explore related products
OEM vs cheap floor pans
When it comes to replacing the floor pans of your 2-door Jeep Cherokee, you may be considering whether to opt for Original Equipment Manufacturer (OEM) parts or cheaper aftermarket alternatives. While OEM parts are typically more expensive, they offer several advantages over their cheaper counterparts.
Firstly, OEM parts are designed specifically for your vehicle, ensuring a perfect fit. This can save you time and effort during installation, as you won't need to make any adjustments or modifications. In contrast, cheap aftermarket floor pans may require more tedious work to get them to fit properly, as some users have reported a poor fit that needed "tweaking".
Secondly, OEM parts are generally made from higher-quality materials, ensuring greater durability and a longer lifespan. This is particularly important for floor pans, as they are subject to constant wear and tear, and may be exposed to moisture and road debris. By investing in higher-quality OEM parts, you can expect better corrosion resistance and improved impact strength, reducing the likelihood of future repairs or replacements.
However, it's worth noting that some aftermarket floor pans, such as those from Raybuck, are also made from heavy, quality materials. These aftermarket options can provide a more affordable solution without sacrificing too much on quality. Additionally, some users have reported successfully creating their own floor pans from materials such as old refrigerator and dryer side panels, demonstrating that creativity and resourcefulness can also lead to cost-effective solutions.
Ultimately, the decision between OEM and cheap floor pans depends on your specific needs and budget. If you prioritize quality, fit, and longevity, then OEM parts are the way to go. However, if you're comfortable with some extra installation work and potential trade-offs in quality, cheaper aftermarket options or even DIY solutions can be a more economical choice.
It's also worth mentioning that, regardless of your choice, addressing rust issues and using appropriate primers and sealants during installation are crucial steps to ensure the longevity of your floor pans and protect your Jeep Cherokee from corrosion.
Instant Pot Heat Mystery: Understanding the Base
You may want to see also
Explore related products
Raybuck floor pans
Raybuck Auto Body Parts offers a wide selection of quality repair panels, including floor sections, for Ford and Mercury vehicles. Their floor pans are made of 18-gauge steel and are available for the following Ford models:
- Focus
- Mustang
- Thunderbird
- F250
- F350
- F450 Super Duty trucks
Raybuck's floor pans are only available in the aftermarket and not from the manufacturer. They are heavy-duty and high-quality, with each pan weighing around 9 lbs.
In addition to floor pans, Raybuck also offers rocker panels, quarter panels, quarter sections, bumpers, and a variety of flooring and mat options, including carpeting, vinyl flooring, floor mats, and trunk mats.
A user on the NAXJA Forums - North American XJ Association website commented that Raybuck floor pans are "quality, heavy pieces," although they had not yet installed them. The user also noted that the Raybuck pans were more expensive than other options, but worth the price for the quality.
Prepping Your New Cast Iron Pan: A Step-by-Step Guide
You may want to see also
Explore related products
Rockauto floor pans
RockAuto is an online auto parts retailer that offers a range of floor pans for various vehicles, including the Jeep Cherokee. Floor pans are the flat metal surfaces that make up the floor of a vehicle's interior and are often replaced due to rust or damage.
RockAuto's floor pans for the Jeep Cherokee are known for being affordable, with some customers mentioning that they are about half the price of other options. While the quality may not be the best, they can still be a good choice with some modifications. One customer noted that the amount of rust on their Cherokee's floor required them to use additional metal to fill holes, but overall, they had no issues with the RockAuto pans.
RockAuto offers floor pans for both the driver and passenger sides of the Jeep Cherokee, and they are available for various model years, including 1984 to 2001. It's important to note that the fit for a two-door Cherokee may be slightly different, as one customer mentioned having to cut holes for the seat bolts.
When considering floor pan replacements, it's essential to weigh the cost against the quality and ease of installation. While RockAuto's floor pans are inexpensive, they may require additional work to fit properly. Customers with welding skills and experience in metalwork may find this a worthwhile trade-off, but for others, the more expensive OEM or aftermarket options might be a better choice.
Oil Pan Damage: What Does Insurance Cover?
You may want to see also
Explore related products
Key Parts floor pans
If the floor pans on your Jeep Cherokee XJ are rusting out, Key Parts offers a 1/2 Front Floor Pan replacement that fits both 2- and 4-door models. This product is designed to OE specifications for a simple replacement and is made from high-quality, OE gauge steel. Installation requires welding and is therefore recommended to be done by a professional. The 1/2 Floor Pan is available for both the driver and passenger sides of the 1984-2001 Jeep Cherokee XJ.
The Key Parts 1/2 Floor Pan for the Jeep Cherokee XJ has received positive reviews, with customers reporting a good fit and ease of installation. The product is also available in paintable primer, allowing for customisation to match the vehicle's colour.
In addition to the 1/2 Floor Pan, Key Parts also offers a Rear Floor Pan and a Front Seat Mount for the Jeep Cherokee XJ. The Rear Floor Pan is available for $109.99, while the Front Seat Mount is priced at $42.99.
When considering replacement floor pans, it is important to note that there are various options available, including cheap and expensive alternatives. While cheap floor pans may be more affordable, they may not fit as well or require more tedious installation. On the other hand, expensive floor pans, such as those from Raybuck, are made of quality, heavy-duty steel and are recommended if one has the extra means. Some Cherokee owners have also opted to make their own floor pans from old refrigerator and dryer side panels, stop signs, etc.
Unblocking Soil: Drainage Solutions for Soil Pans
You may want to see also
Frequently asked questions
There are a variety of floor pans available for the 2-door Cherokee. The cheapest option is to make your own from old refrigerators, dryer side panels, or stop signs. You can also buy pre-formed panels, but these may require some tweaking to get the right fit. Some retailers that sell floor pans include Rockauto, Raybuck, Quadratec, and Classic 2 Current Fabrication.
Yes, the fit for a 2-door Cherokee is a little different from other models. You may need to cut holes for the seat bolts.
Floor pans for the 2-door Cherokee can be purchased from a variety of retailers, including Rockauto, Raybuck, Quadratec, and Classic 2 Current Fabrication. You can also check junkyards for used parts.
