Surge Protection For Air Fryers: A Safe Frying Experience

Surge protectors are a great way to safeguard your appliances from power spikes, but they can be tricky when it comes to high-wattage appliances like air fryers. While some sources suggest that a 15-amp power strip could work for an air fryer if it's the only appliance plugged in and used at a time, others advise against it due to the high current draw of air fryers, which can stress the power strip. In addition, it's important to ensure that the total wattage of all devices plugged into a surge protector doesn't exceed its rated power to avoid tripping the protection circuit. Therefore, it's generally recommended to plug an air fryer directly into a wall socket rather than using a surge protector or power strip.

Air fryer and kettle tripping the surge protector

An air fryer and a kettle can trip a surge protector because they draw a lot of current, which stresses the power strip. This is especially true if the air fryer and kettle are used simultaneously. It is recommended to plug these appliances directly into an outlet, rather than into a power strip or extension cord.

The problem may also be caused by the power strip itself. It may have a faulty internal circuit breaker, or it may be leaking current, overloading the circuit. If the power strip is new, it may be defective and should be returned or replaced.

To avoid tripping the surge protector, it is important to ensure that the power strip is rated for the appropriate load. A 15-amp power strip may not be sufficient for an air fryer and a kettle, as they require a lot of current. A higher-rated power strip, such as a 20-amp power strip, may be more suitable.

Additionally, it is important to consider the wiring and circuit breaker of the outlet. The kitchen circuit may be wired for 20 amps, but if the outlet is rated for 15 amps, it can only provide 15 amps. In this case, a 20-amp outlet and circuit breaker may be needed.

To summarise, to prevent tripping the surge protector, it is recommended to plug the air fryer and kettle directly into a wall outlet, ensure the power strip is rated for the appropriate load, and check the wiring and circuit breaker of the outlet.

Air fryer and toaster oven plugged into a power strip

Plugging an air fryer and toaster oven into a power strip is not recommended. Appliances that use high wattage, such as toasters, can draw more power than a power strip can provide, causing the strip to overheat and creating a fire hazard.

Toasters and toaster ovens have exposed wires inside that heat up to high temperatures. It takes a lot of current to fire up the heating element, which can easily overload a power strip.

Air fryers are high-wattage appliances that should not be plugged into a power strip. An 1800-watt air fryer, for example, draws 15 amps of power, which is the maximum load that most power strips can handle. Using an air fryer with other appliances that draw power can overload the power strip and cause it to overheat.

If you need to use a power strip to manage multiple devices, it is recommended to only connect light-load appliances such as computers, lamps, and clocks. For high-wattage appliances, it is best to plug them directly into a wall outlet.

If you are using an extension cord to connect your air fryer and toaster oven, it is recommended to use a heavy-duty extension cord or an appliance extension cord. Make sure to use the shortest extension cord that will work and that can be safely snaked around to the outlet without creating a tripping hazard.

Surge protector recommendations for an air fryer and Instant Pot

Surge protectors are a great way to plug in multiple appliances in your kitchen. However, it is important to note that some appliances, such as air fryers, draw a lot of current and can stress the power strip. This is especially true if you are using multiple appliances at the same time.

If you are using a Ninja air fryer (1500 watts) and an Instant Pot (1000 watts) at the same time, you will need to plug them into separate circuits. You can use two separate surge protectors, but it is important to find outlets on different breakers to avoid overloading a single circuit.

When choosing a surge protector, look for one with a 15-amp circuit breaker and an internal fuse. This will help ensure that your appliances are protected and your circuit is not overloaded. It is also recommended to use a power strip with a UL 1363 listing.

Additionally, it is important to follow safety guidelines when using any electrical appliance. Make sure to plug your appliances directly into an outlet whenever possible and avoid using extension cords or power strips for heavy loads.

By following these recommendations, you can safely use a surge protector for your air fryer and Instant Pot while also protecting your electrical circuits and appliances.

Extension cord recommendations for an air fryer

Extension cords are not recommended for air fryers, as they can be a fire hazard. However, if you need to use an extension cord, it is important to choose one that is suitable for your air fryer's power requirements. Here are some recommendations and guidelines to help you select the right extension cord for your air fryer:

• Check the power requirements of your air fryer: Before choosing an extension cord, it is crucial to understand the power requirements of your air fryer. Most air fryers have their power specifications listed on a label or in the user manual. Look for the voltage (V), wattage (W), and amperage (A) ratings.
• Choose an extension cord with the appropriate gauge: The gauge of an extension cord refers to the thickness of the wire. A lower gauge number indicates a thicker wire that can handle more current. For an air fryer with a power rating of 1800W, it is recommended to use a 12-gauge or 14-gauge extension cord. A 14-gauge cord can typically handle up to 1800W or 15A, while a 12-gauge cord is suitable for higher-power appliances.
• Select a heavy-duty extension cord: Look for extension cords designed for appliances with heating elements, such as air conditioners or similar high-power devices. These cords usually have thicker insulation and can handle higher currents.
• Match the extension cord length to your needs: While shorter extension cords are generally recommended to minimise safety risks, choose a length that safely meets your requirements. Keep in mind that longer cords may be more challenging to find in heavier gauges.
• Prioritise safety: Always opt for safety when in doubt. If your air fryer has a particularly high power rating, consider consulting an electrician or avoiding the use of an extension cord altogether. Additionally, ensure that the extension cord is not coiled or looped, as this can affect heat dissipation and increase the risk of fire.
• Follow manufacturer guidelines: Refer to the instructions provided by the air fryer manufacturer for any specific recommendations or warnings regarding the use of extension cords. Some manufacturers may advise against using extension cords altogether.

• Air Conditioner Extension Cords: These cords are typically designed for high-power appliances and have a heavier gauge, making them suitable for air fryers. You can often find them in lengths up to 15 feet.
• Appliance Extension Cords: Look for appliance extension cords designed for heavy-duty applications. These cords usually have thicker insulation and are rated for higher currents, making them suitable for air fryers.
• 1875W 15A Low Profile Flat Plug Extension Cord: This particular model was recommended by an employee of Home Depot for an air fryer with similar power specifications. It has a 14-gauge wire and a flat plug, making it suitable for air fryers up to 1875W.

Remember to always prioritise safety when using extension cords with high-power appliances like air fryers. If you are unsure, consult a qualified electrician to ensure that your setup is safe and complies with local electrical codes.

Air fryer plugged into a HOLSEM 12 Outlets Surge Protector

The HOLSEM 12 Outlets Surge Protector Power Strip is a highly rated product with 4.8 out of 5 stars on Amazon. It features 12 outlets and 3 smart USB charging ports, with 6 regular outlets and 6 widely spaced outlets to accommodate larger plugs. The USB ports include 2 smart IC technology ports that can detect your device and deliver the fastest possible charge, up to 5V/3.1A. The surge protector also has a 4000-joule energy rating, making it ideal for computers, printers, telephones, and home theatre systems.

The product offers guaranteed quality and all-around protection with ETL listing and FCC certification. It safeguards electronic devices from voltage fluctuations, surges, and spikes. The overload protection feature includes a double-break overload switch, and the unit is made of flame-retardant material that can withstand temperatures up to 1,380°F (750°C).

While the HOLSEM 12 Outlets Surge Protector can accommodate multiple devices, it is important to consider the power requirements of each device and whether the surge protector can handle the load. For example, a large 1800W air fryer may trip the surge protector, especially if used simultaneously with other high-power appliances. In such cases, it is recommended to plug the air fryer directly into a wall socket rather than using a surge protector or power strip.

However, if you intend to use the HOLSEM 12 Outlets Surge Protector for your air fryer and other appliances, it is crucial to ensure that the total power draw does not exceed the capacity of the surge protector and the wall outlet/circuit breaker. Overloading the surge protector or the electrical circuit can lead to tripped breakers or, in some cases, potential safety hazards.

Therefore, when plugging an air fryer into the HOLSEM 12 Outlets Surge Protector, carefully consider the power requirements of the air fryer and any other connected devices. Ensure that the total power draw remains within safe limits to avoid overloading the surge protector or the electrical circuit.

Frequently asked questions