Hanging Pot And Pan Rack: Diy Guide

Hanging pot and pan racks are a great way to save space and add a decorative element to your kitchen. There are many DIY options to choose from, including repurposing old materials like chicken wire, antique ladders, and reclaimed wood, or using new materials like copper piping and wall-mounted pegboards. Whether you have a small or large kitchen, a high-ceilinged or galley kitchen, there is a hanging pot and pan rack solution for you.

Chicken wire pot rack

Chicken wire is a versatile material that can be used for various DIY projects, including creating a hanging pot and pan rack. Here's a step-by-step guide on how to make a chicken wire pot rack:

Planning and Gathering Materials:

• Decide on the desired size and shape of your pot rack. Measure the space where you plan to hang the rack to determine the appropriate dimensions.
• Gather the necessary materials: chicken wire, gloves, tin snips, a wire lampshade frame, needle-nose pliers, and adjustable pliers. You can find these supplies at your local hardware store or online.
• Optionally, you can also get a 12-inch nursery pot to use as a base for forming the cloche, as mentioned in the similar project of making a wire cloche for plants.

Creating the Chicken Wire Pot Rack:

• Measure the circumference of the nursery pot (or your desired base) and cut a length of chicken wire that matches this measurement. Wear gloves for safety.
• Cut the chicken wire to your desired height. You can make it as tall as or taller than the pot.
• Cut a semicircular piece of chicken wire to fit around the lampshade frame. This will form the top of your pot rack.
• Wrap the semicircular chicken wire around the lampshade frame, bending and squeezing it to fit snugly. Cut away any excess wire and use needle-nose pliers to secure the ends.
• Wrap the length of chicken wire loosely around the pot or base to create a cylinder for the bottom of the pot rack. Secure any cut ends with needle-nose pliers.
• Attach the wire cloche bottom (mesh cylinder) to the cloche top (lampshade frame) using adjustable pliers. Twist the top edge of the cylinder around the bottom edge of the frame, securing any cut ends.
• You can add a decorative accent, such as a glass doorknob, by wiggling it into an opening at the top of the wire cloche and pinching the wire together with needle-nose pliers to hold it in place.
• If desired, you can snug the bottom edge of the pot rack into the garden soil and use garden staples to hold it firmly in place, similar to the wire cloche project.

Your chicken wire pot rack is now ready to be hung and used! You can customize the design by adding hooks or chains to hang pots and pans, or even painting the chicken wire to match your kitchen decor.

Wall-mounted pot rack

Materials and Tools:

• Reclaimed wood
• Wall-mounted pegboard
• Wooden dowels
• Copper pipes
• Towel racks
• Tension rod
• Hooks (S-hooks, pot hooks, etc.)
• Heavy-duty wall brackets
• Screws
• Drill
• Stud finder

Instructions:

• Decide on the location for your pot rack. Consider placing it near the stove or range, as that's where you do most of your cooking.
• Measure the space and choose a pot rack design that fits the available space and your storage needs.
• Gather the necessary materials and tools.
• If using wooden dowels or copper pipes, cut them to the desired length.
• If painting or refinishing any materials, such as towel racks, do so in a well-ventilated area.
• Use a stud finder to locate the wall studs and mark their positions. This will ensure a secure installation.
• Drill holes in the wall and/or pot rack mounting hardware as needed.
• Attach the pot rack to the wall, following the manufacturer's instructions or your chosen design.
• Add hooks to the pot rack, adjusting their placement to suit your cookware.
• Hang your pots, pans, and utensils, arranging them in a way that is both functional and aesthetically pleasing.

Design Variations:

• Rustic-chic pot rack: Nail together some reclaimed wood to create a rustic-chic pot rack. You can leave the wood unfinished or apply a finish to match your kitchen's style.
• Minimalist pot rack: For a minimalist kitchen, opt for a simple rectangular wall-mounted frame. Wooden dowels are an inexpensive and easily customisable option for this design.
• Copper pipe pot rack: Use shiny copper pipes as rods for a unique and affordable pot rack. The copper will add a metallic gleam to your kitchen.
• Towel rack pot rack: Repurpose old towel racks to create multi-use hanging kitchen storage. A coat of paint and a glossy clear coat can give them a new lease of life.
• Tension rod pot rack: Install a tension rod under the range hood or cabinet and hang pots and pans using simple hooks. This option keeps your kitchen walls streamlined.

Copper pipe pot rack

A copper pipe pot rack is a great way to add style and functionality to your kitchen. This DIY project is easy to do and can be a budget-friendly way to update your kitchen.

Planning and Materials

First, you need to measure the space where you want to hang your pot rack. This will determine the length of the copper pipe you need. You will also need to leave enough room for the end caps and hooks. The length of the pipe will depend on your space, but for reference, a five-foot-long pipe was used in one example.

Next, gather your materials. You will need a copper pipe, pipe cutter, rebar, copper "S" hooks, drill, drill bits, hooks, copper spray paint, end caps, sandpaper, rope, and cement glue.

Cutting the Pipe

Using your pipe cutter, measure and cut the copper pipe to your desired length. Set the pipe cutter on your mark, tighten it, and turn it around the pipe. You will need to tighten the cutter after each turn. This will ensure a clean cut.

Drilling and Assembling

Hold the hanging hook in the desired spot and mark the screw holes with a pen. Pre-drill the holes using a drill bit slightly smaller than the size of your screws. You can then screw in the hooks. If you are working in an awkward spot, you may find it easier to screw in the hooks first and then remove them before continuing.

To remove any writing on the copper pipe, use 220-grit sandpaper to sand it off. This will also help to shine up the pipe.

Final Assembly and Installation

Now, you can add the hanging hook, end cap, and "S" hooks to one end of the pipe. You will likely need two people for this step. Thread the rope through the pipe, down one side, across the bottom, and up the other side. Disassemble the joints as you thread the rope, then reassemble them. Take the joints apart again, apply cement glue, and push them back together. Let this dry overnight.

Drill a hole the size of your rope into the end caps. This will keep the rope from moving around and provide stability. Thread the rope through the end caps and secure it with more glue.

To hang the rack, you can either tie the rope to eye hooks screwed into the ceiling or drill holes in the ceiling and thread the rope through, tying a knot at the top.

Now, your copper pipe pot rack is ready to use! Hang your pots on the "S" hooks and adjust the rack as needed.

This project is a fun and rewarding way to add a unique touch to your kitchen and improve your storage solutions.

Pegboard pot rack

Pegboards are a versatile and attractive storage solution for your pots and pans. They can be easily customised to suit your space and style, and are a great way to save space in a small kitchen.

To create a pegboard pot rack, you will need a few basic tools and materials, which can be sourced from your local hardware store. The process involves cutting and painting the pegboard and wooden planks, assembling the structure, and then mounting it to your wall.

First, decide on the size of your pegboard. Pre-drilled pegboards usually come in 2x4-foot pieces, which you can cut in half for a smaller pegboard, or use the full piece for a larger one. You will also need wooden planks for mounting, which should be cut to 2-foot pieces to line up with the sides of the pegboard. If you are creating a larger pegboard, you may want to add an extra plank in the middle for added stability.

Next, paint the pegboard and the planks with a clear polyurethane to seal and protect the material. You can also add colour to match your kitchen's style by choosing a paint that suits your taste. Don't forget to paint the top of each plank, as it will be visible through some of the holes in the pegboard.

Once the paint is dry, it's time to assemble the pegboard. Line up the planks with the pegboard, attaching them with two small brass wood screws per plank. Then, decide on the placement of your pegboard on the wall and mark the corners with a pencil.

Drill holes through the pegboard and plank into the wall, and insert anchors into these holes. Finally, drill screws through the board and into the anchors to secure your pegboard in place.

Now comes the fun part—organising and decorating your pegboard! Use hooks, brackets, shelves, and baskets to create a functional and stylish storage solution for your pots and pans. You can also add accessories like spice racks, coffee stations, or even a place to hold your iPad.

With a pegboard pot rack, you can free up cabinet space and keep your kitchen organised and efficient. It's a simple DIY project that can make a big impact in your cooking space.

Pot rack over island

A pot rack over your kitchen island can be a stylish and practical way to store your pots and pans. This solution works best if you have high ceilings and an island that isn't too large, so you don't have to lean over the countertop to reach for a pan.

If you're looking for a DIY project, you can create a rustic-chic look by nailing together some reclaimed wood or using a wall-mounted pegboard. For something more understated, try sourcing a piece of reclaimed wood and hanging your pans with wrought iron S-hooks.

If you're looking for a ready-made option, KES offers a ceiling pot rack with 15 hooks and a central mesh shelf that can hold additional pots. This rack measures 29.5" x 17.7" x 1.6" and has two support bars for added stability. It comes with adjustable steel wire rope for customising the height, but note that it weighs 6.08 lbs, so be sure to hang it from ceiling joists.

Another option is the Ebern Designs hanging pot rack, which features two chains for mounting and S-hooks for hanging pots and pans. You can even hang some greenery from it for a rustic, cottage-core charm.

Frequently asked questions