Clean Your Tefal Smart Fryer Filter: Easy Step-By-Step Guide

Tefal's Smart Clean fryer is a kitchen appliance that can cook all types of food, including vegetables, meat, fish, seafood, and fruits. It is important to clean the fryer regularly to keep it in good condition. To clean the Smart Clean fryer filter, first, let the fryer cool down completely. Then, pour the oil into a separate container and remove the filters and lid from the fryer, following the specific instructions for your model. Clean the lid with hot soapy water and dry it thoroughly. Change the filter according to the specific model instructions. Removable bowls should be cleaned with hot soapy water and dried thoroughly, while fixed bowls should be wiped out with paper towels to remove oil residue. Never immerse the fryer, cord, or plug in water. Instead, place the fryer in a dry sink and fill it halfway with water and washing-up liquid, scrubbing the inside with a non-abrasive sponge or kitchen brush. Make sure that the water does not overflow onto the outside of the fryer or the heating element. Finally, pour out the water, rinse the inside, and dry the fryer thoroughly. The outside of the fryer can be wiped down with a damp sponge after each use.

How often should I change the filter?

Tefal's Smart Clean fryer comes in a few different models, but the frequency with which you should change the filter remains the same across all of them.

The metallic charcoal filters should be changed between 35 to 50 frying sessions, depending on the model. The saturation indicator will let you know when the filter needs to be changed. Foam filters, on the other hand, should be changed after 20 frying sessions.

If you are frying fish, Tefal recommends using a separate filter and changing the oil after use. Waterclean filters made of carbon fibres should be washed after 80 uses and can be reused. The Pure Air system is a permanent system that does not need to be replaced.

How to clean the filter?

How to Clean the Filter:

The filter in your Tefal Smart Clean Fryer should be changed regularly, depending on the type of filter and model of fryer. Metallic charcoal filters should be changed between 35 and 50 frying sessions, according to the saturation indicator. Foam filters should be changed after 20 frying sessions. If you are frying fish, it is recommended to use a separate filter and change the oil after use. Waterclean filters made of carbon fibres should be washed after 80 uses and can be regenerated after each wash. The Pure Air system is permanent and does not need to be replaced.

To change the filter, first allow your fryer to cool completely. Then, remove the filters and the lid from the fryer, following the specific instructions for your model. The lid can be cleaned with hot soapy water and dried thoroughly, or in the dishwasher if your model allows.

It is important to regularly change or clean the filter to prevent clogging and ensure proper water drainage during use.

How to clean the lid?

To clean the lid of your Tefal Smart Clean Fryer, follow these steps:

First, allow the fryer to cool down completely. Once it has cooled, remove the lid from the fryer according to the specific instructions for your model. Some lids can be cleaned in the dishwasher, so check your model instructions to see if this is the case for your fryer. If your lid cannot be cleaned in the dishwasher, wash it by hand with hot soapy water. Make sure to dry the lid thoroughly after washing, either by hand or by placing it in the dishwasher.

It is important to follow the specific instructions for your model when removing and cleaning the lid to ensure that it is cleaned properly and safely.

How to clean the removable bowl?

To clean the removable bowl of your Tefal Smart Clean fryer, follow these steps:

• Let the fryer cool down completely.
• Pour the oil into a separate container. Now is a good time to strain the oil or replace it with new oil.
• Remove the filters and the lid from the fryer. Refer to your specific model's instructions for detailed guidance on this step.
• Clean the lid with hot soapy water and dry it thoroughly. Some lids can be cleaned in a dishwasher, but check your model's instructions to be sure.
• Change the filter according to your model's specific instructions.
• Clean the removable bowl with hot soapy water and dry it thoroughly. Do not use any abrasive cleaning materials. Removable bowls are also dishwasher-safe.
• If your fryer has a filtration system, don't forget to drain the valve.

How to clean the fixed bowl?

To clean the fixed bowl of your Tefal Smart Clean fryer, follow these steps:

First, let the fryer cool down completely. Unplug the appliance and wait until the oil is no longer hot. Then, pour the oil into a separate container. You can use this opportunity to strain the oil or replace it with fresh oil.

Next, remove the filters and the lid from the fryer. Consult your specific model's instructions for detailed guidance on this step. The lid can be cleaned with hot, soapy water and should be dried thoroughly afterwards. Some models' lids can be cleaned in a dishwasher, but check your model's instructions to be sure.

Now, you can focus on the fixed bowl. Wipe out the bowl with paper towels to clean out as much oil residue as possible. Be sure to never immerse the fryer, cord, or plug in water. Instead, place the fryer in a dry sink and fill it halfway with water and a small amount of washing-up liquid. Use a non-abrasive sponge or kitchen brush to scrub down the inside of the bowl. Ensure that the water does not overflow onto the outside of the fryer or over the heating element.

Once you've scrubbed the inside of the fixed bowl, pour out the water and rinse just the inside of the fryer. Dry the bowl thoroughly.

Finally, wipe down the outside of the fryer with a damp sponge. This is recommended after each use to keep your appliance clean and well-maintained.

Frequently asked questions