Simple Cleaning Guide For Revere Ware Pan Bottoms

Cleaning the bottom of a Revere Ware pan is a simple task that can be done in a few different ways. One method is to use a mild abrasive cleaner such as Bar Keepers Friend, which can be applied with a damp cloth to remove any burnt-on residue. Another option is to use a combination of lemon and salt, or vinegar and salt, to create a natural cleaning paste that will effectively remove any discolouration from the copper bottom. For stainless steel Revere Ware, a product called Bartender's Friend is recommended for removing burnt-on stains.

Use lemon and salt to remove discolouration

Lemon and salt can be used to remove discolouration from Revere Ware pans. This method is recommended by Revere Ware in their official manuals and pamphlets.

To use lemon and salt to remove discolouration from the bottom of a Revere Ware pan, start by cutting a lemon in half. Next, sprinkle salt onto the pulp of the lemon. Then, rub the lemon lightly over the copper bottom of the pan. Every trace of heat discolouration should disappear.

If the lemon and salt treatment doesn't work, it may be because grease has been burned onto the bottom of the pan. In this case, it is recommended to first scour the burned portions with an abrasive cleanser, such as Sunbrite, and then the lemon and salt treatment can be used to restore the original lustre.

Lemon and salt can also be used to clean hard water deposits in tea kettles. Combine equal amounts of vinegar and water in the kettle and simmer for about 10 minutes, or until the deposits flake off.

Other alternatives to lemon and salt for removing discolouration include:

• Vinegar and salt
• Sour milk and salt
• Ketchup
• Vinegar
• Bar Keepers Friend
• Wright's Copper Cream
• Twinkle

Try ketchup to clean copper bottoms

Copper-bottomed pans, such as Revere Ware, can be cleaned with ketchup. Copper oxide forms when copper reacts with the air, causing the copper to look tarnished. Copper oxide can be dissolved by a mixture of weak acid and table salt, which are both found in ketchup.

To clean the copper bottoms of your Revere Ware pans with ketchup, squeeze out a generous amount of ketchup and spread it evenly across the copper surface. You can also add an equal amount of salt to the ketchup to make a paste and use a soft cloth to work it into the copper. Leave the ketchup on the pan for as long as possible, then wipe it off with a cloth and rinse the pan with water.

For more heavily tarnished copper, you may need to use a stronger commercial solution or mechanically buff the surface. If there is burnt-on grease on the bottom of the pan, you may need to use an abrasive cleanser before applying the ketchup.

Ketchup can also be used to clean stainless steel, cast iron, brass, silver, and even burnt pans and oven surfaces.

Use baking soda to clean burnt-on stains

Burnt-on stains can be a challenge to remove, but baking soda can be your secret weapon. Here's how to use baking soda to clean your Revere Ware pan and bring it back to life:

The Deglazing Technique

This method combines the power of deglazing with baking soda to loosen and remove burnt-on food. Start by removing as much burnt food and debris from the pan as possible. Then, put the pan back on the stove and heat it up. Add a cup of water or a mixture of half water and half white vinegar to the pan and let it boil. Use a spatula or scraper to deglaze the bottom of the pan, loosening the burnt bits. Pour out the liquid and, without drying the pan, sprinkle baking soda liberally over the bottom. Let the pan cool, then scrub vigorously with a wet scouring sponge or nylon brush. Finally, wash and dry your pan as you normally would.

The Baking Soda and Water Method

This method is perfect for scorched pans with burnt food. Start by removing as much food and debris as you can. Create a paste by mixing three parts baking soda to one part water; adjust the amount as needed to cover the burnt area. Apply the paste liberally to the burnt pan. Alternatively, you can cover the bottom of the pan with a thin layer of warm water and then add enough baking soda to form a paste. Let the paste sit for a few hours or overnight. If you're short on time, you can add a little more water to thin the paste, then boil it on the stove briefly before removing from the heat and letting it cool. After the pan has cooled, wipe or scrub away the burnt residue.

The Baking Soda and Vinegar Method

For heavier-duty cleaning, the baking soda and vinegar method is a dynamic duo. Remove as much food and debris as possible from the pan. Add enough white vinegar to cover the bottom of the pan with at least half an inch of liquid. Boil the vinegar, then let it simmer for a few minutes. Remove from the heat and add a cup of baking soda; you'll see a fizzing reaction. It's best to do this in the sink. Wait for the fizzing to stop, then discard the liquid and scrub the pan with a nylon brush or scouring sponge, adding more baking soda if needed. Finally, rinse and dry your pan.

The Baking Soda and Lemon Method

Lemons are a fantastic natural cleaner for stainless steel or copper cookware. Combine them with baking soda to remove oxidation stains and restore your burnt pan. Remove as much food and debris as possible. Keep a thin layer of water in the pan and sprinkle baking soda liberally over the bottom. Cut a lemon in half and use the flesh side to scour the pan with the baking soda mixture. The combination of acidic lemon juice and alkaline baking soda will create a slight fizzing reaction, which is normal and effective. If your pan has a copper bottom, turn it upside down and use this method to remove stains and restore shine.

With these methods, you can effectively use baking soda to clean burnt-on stains from your Revere Ware pan. Remember to always test a small area first and follow the care instructions provided by the manufacturer.

Soak in vinegar and water to remove hard water deposits

To remove hard water deposits from Revere Ware, a combination of vinegar and water is very effective. This method is recommended by Revere Ware in their cleaning and care guides. The process is simple and straightforward.

Firstly, equal parts vinegar and water should be combined in the Revere Ware item. For tea kettles, the solution should be brought to a boil and then simmered for around 10 minutes. This will loosen and dissolve any caked-on lime or mineral deposits, which can then be rinsed away. If the deposits are particularly stubborn, the process may need to be repeated.

Alternatively, the item can be filled with a 50/50 vinegar/water mixture and left to stand overnight. This method is ideal for tea kettles but can also be used for other items. The solution will slowly dissolve the hard water deposits, and any remaining residue can be rinsed away.

For stainless steel items, a variation of this method can be used. By adding a scrunched-up piece of aluminum foil to the vinegar and water solution, a chemical reaction occurs that helps to remove the hard water residue. The aluminum foil also provides a gentle abrasive surface to scrub away any remaining deposits.

These methods are simple and effective ways to remove hard water deposits from Revere Ware, restoring the items to their original condition.

Avoid using steel wool to prevent corrosion

Revere Ware is known for its durability and quality, and proper care is essential to maintain its condition. While the cookware is designed for convenience and ease of use, it's important to follow certain guidelines to ensure its longevity.

One important aspect of Revere Ware care is avoiding the use of steel wool during cleaning. While steel wool can be effective for removing stubborn residue, it can also be abrasive and cause scratching on the surface of the cookware. These scratches can create an uneven texture, impacting the pan's non-stick properties and making it more difficult to clean effectively in the future.

Additionally, steel wool can leave behind small particles that can become embedded in the scratches or crevices of the pan's surface. Over time, these particles can lead to corrosion, particularly if the pan is not thoroughly rinsed and dried after cleaning. Corrosion not only affects the appearance of the pan but can also compromise its functionality, impacting heat distribution and cooking performance.

To prevent corrosion and maintain the integrity of Revere Ware, it is recommended to use alternative cleaning methods. Soaking the pan in warm, soapy water can help loosen burnt-on food and grease, making it easier to wipe away with a soft cloth or sponge. For more challenging residue, a mild abrasive cleaner, such as Sunbrite, can be applied with a smooth, damp cloth to effectively remove buildup without causing damage.

By avoiding the use of steel wool and opting for gentler cleaning alternatives, you can help ensure that your Revere Ware remains in optimal condition, preserving its appearance, functionality, and longevity. Proper care and maintenance of your cookware are key to enjoying its benefits for years to come.

Frequently asked questions