Corian Shower Pan: Cleaning And Maintenance Tips

Corian shower pans are a great option for those looking for an easy-to-clean and low-maintenance solution. With no grout lines and a smooth surface, they offer a seamless look that is simple to keep clean. In this guide, we will take you through the steps to effectively clean your Corian shower pan, ensuring it stays in pristine condition. From regular cleaning routines to tackling stubborn stains and scratches, we will cover everything you need to know to keep your Corian shower pan looking as good as new.

Use diluted household bleach for a quick and efficient clean

Corian shower bases are simple to clean and maintain. For a quick and efficient clean, a diluted household bleach solution is a great option. Here are the steps to effectively clean your Corian shower pan using this method:

Prepare the Bleach Solution:

Start by mixing a solution of 3/4 bleach and 1/4 water in a spray bottle. This diluted bleach solution is safe to use on Corian surfaces and will effectively remove any stains or residues. Always ensure you are using regular household bleach and not a concentrated bleach product, as the latter may be too strong and could damage the surface.

Apply the Bleach Solution:

Spray the diluted bleach solution generously onto the Corian shower pan, ensuring that all areas are covered. You can also use a clean cloth or sponge to apply the solution if you prefer. Let the solution sit for a few hours or even overnight for best results. The bleach will work to break down any dirt, stains, or soap scum, making it easier to wipe away.

Rinse and Wipe Down:

After allowing the bleach solution to sit, thoroughly rinse the shower pan with water to remove any remaining bleach residue. Then, use a damp microfiber cloth to wipe down the entire surface. Make sure to dry the surface completely after rinsing to prevent water spots or film build-up.

Frequency of Cleaning:

The frequency of cleaning your Corian shower pan with diluted bleach depends on the level of usage and the appearance you want to maintain. For regular maintenance, a monthly diluted bleach cleaning can be effective. However, if your shower sees heavy use or if you notice stains or soap scum buildup, you may need to increase the frequency to every two weeks or even weekly.

Precautions:

Always exercise caution when working with bleach. Wear protective gloves and ensure the area is well-ventilated during the cleaning process. Do not mix bleach with other cleaning products, as this can create dangerous fumes. Additionally, avoid using undiluted bleach on Corian, as it may be too harsh and could potentially damage the surface.

Avoid window cleaners, which can leave a waxy build-up

Corian showers are simple to clean and maintain. They are nonporous, which increases their stain resistance, and they are also installed without grout, so soap scum, calcium buildup, grime, and mildew are not an issue.

To clean a Corian shower, you can use water and your regular household cleaner. It is recommended to stick with non-abrasive cleaners for smooth surface finishes. When cleaning showers with a matte finish, you can use a mild abrasive cleaner. Always test the cleaner in an inconspicuous spot to ensure that the chemicals will not damage the surface. Once you have scrubbed the surface, simply rinse the cleaner off with water.

Corian surfaces are also compatible with the products listed by the EPA to be effective against the SARS-CoV-2 virus. To clean Corian surfaces, you can use common diluted household bleach. However, it is important to note that you should avoid using window cleaners, as they can leave a waxy build-up that dulls the surface. Instead, warm soapy water, ammonia-based household cleaners, or dedicated countertop cleaners are recommended.

After cleaning, it is important to wipe the surface completely dry to prevent film build-up, which can dull the appearance of the Corian, making the finish appear blotchy and uneven. This film is caused by water or liquid left to dry on the surface. Therefore, it is best to wipe up spills as they occur.

Use a damp microfiber cloth with a standard household kitchen spray for most stains

Corian® Solid Surface is designed for a lifetime of easy care. For most stains, a damp microfiber cloth with a standard household kitchen spray should be all you need.

Firstly, it's important to wipe up spills as they occur. Liquids cannot penetrate Corian® Solid Surface, but it is still good practice to wipe up spills as soon as they happen.

When it comes to cleaning, a damp microfiber cloth and a standard household kitchen spray should be effective for most stains. Always clean using a circular motion. Avoid window cleaners, as these can leave a waxy build-up that dulls the surface.

For most residues, warm soapy water, an ammonia-based household cleaner, or a dedicated countertop cleaner will also do the trick.

It is also important to wipe the surface dry immediately after spills and cleaning. Film will build up on countertops if water is left to dry on the surface, causing a blotchy and uneven finish. Darker colours may require more frequent cleaning to maintain a uniform finish.

Corian® Solid Surface is compatible with the products listed by the EPA to be effective against the SARS-CoV-2 virus. To achieve proper disinfection, it is crucial to follow the manufacturer's use-dilution and application directions.

Buff out stains and abrasions with a scouring pad

Corian shower bases are simple to clean and maintain. They are nonporous, increasing their stain-resistant capabilities. Solid surfaces are also installed without grout, so soap scum, calcium buildup, grime, and mildew are not issues.

However, stains and abrasions may occur due to regular daily use. To buff out these imperfections, follow these steps:

Use a scouring pad to buff away the stain or abrasion. Scotch-Brite scouring pads are recommended for this purpose, as they are non-abrasive and suitable for matte finishes. You can find these pads in green, maroon, and white at your local grocery, retail, or online store.

When buffing, apply light pressure and use small, circular motions, working from the front to the back of the stain, and then from side to side. Ensure you always buff in a circular motion to achieve a uniform finish.

After buffing, rinse the area with clean water and wipe it dry with a microfiber cloth. This step is crucial to prevent water spots and maintain the shine of your Corian shower pan.

If the stain or abrasion persists, repeat the process, applying more pressure to the scouring pad. You can also try using a mild abrasive liquid cleanser, such as Soft Scrub, in conjunction with the scouring pad.

By following these steps, you can effectively remove stains and abrasions from your Corian shower pan, restoring its original beauty and shine.

Sand out scratches and gouges with 220-grit and 320-grit sandpaper

To clean a Corian shower pan, you can sand out scratches and gouges with 220-grit and 320-grit sandpaper. This process will help you restore your shower pan to its original glory.

First, assess the damage and determine the depth of the scratches and gouges. If they are deep, start with a coarser sandpaper like 220-grit to sand down the surface and remove the scratches and gouges. Follow a consistent sanding pattern, such as small circular motions, and apply even pressure to ensure a uniform finish.

Next, switch to the finer 320-grit sandpaper. This grade will help remove the scratches left by the coarser sandpaper and smooth out the finish. Again, use a consistent sanding pattern and apply light to moderate pressure to achieve a consistent result.

After sanding, it is essential to remove any residue from the surface. Use a damp cloth or sponge to wipe down the area, ensuring you remove any dust or debris created during the sanding process.

Finally, buff the surface using a scouring pad, such as a Scotch-Brite pad, to restore the luster and shine of your Corian shower pan. This final step will help you achieve a smooth and even finish.

Remember to always test the sanding process on an inconspicuous spot first to ensure that it does not damage the surface. Additionally, always follow the grain of the Corian material when sanding to achieve the best results.

Frequently asked questions