Tillie Doyle
The Ring Pan-Tilt Mount can be installed both indoors and outdoors. The indoor version can be set up by downloading the Ring app and scanning the QR code on the device. The camera should be placed on a level surface with 16.5 cm (6.5 inches) of clearance in every direction. The mounting plate should be installed with the UP arrow pointing up, and the power cable should be plugged in and anchored to the wall or ceiling. The outdoor version, on the other hand, is known as the Stick Up Cam and is available in battery, plug-in, and solar options.
Installation Guide for Ring Pan-Tilt Mount
| Characteristics | Values |
|---|---|
| Device | Pan-Tilt Indoor Cam, Outdoor Cam (formerly Stick Up Cam, 3rd Gen) |
| Installation Requirements | Ring app, mounting plate, power cable, cable clip, privacy cover |
| Installation Steps | Download the Ring app and scan the QR code on your device. Choose a location with a level surface and sufficient space (6.5 inches or 16.5 cm in every direction). Install the mounting plate with the UP arrow pointing in the desired direction. Mark screw holes on the wall/ceiling using the mounting plate as a guide. Drill holes for wall anchors if needed. Run the power cable through the mounting bracket and plug it in. Secure the camera to the mounting bracket and plate by sliding until you hear a click. |
| Additional Notes | For stucco, brick, or concrete walls, use a 3/16 inch (5mm) masonry bit to drill holes. Anchor the power cable to the wall or ceiling. |
Explore related products
What You'll Learn
Download the Ring app and scan the QR code
To install your Ring Pan-Tilt Indoor Cam, you'll first need to download the Ring app. This app is crucial as it will guide you through the installation process and allow you to control and monitor your camera. You can download the Ring app from the App Store or Google Play, depending on your device. Once you have downloaded and installed the app, open it up and create an account if you haven't already.
After launching the app, you'll be prompted to scan the QR code on your device. This code is typically located on the back or side of your Ring Pan-Tilt camera. Hold your phone steady and centre the QR code on the screen to ensure a successful scan. The app will recognise the code and automatically link your camera to your account. This step is essential for establishing a connection between your camera and your phone, enabling you to access the camera's live feed and adjust its settings.
The QR code contains essential information about your specific camera, such as its model number and unique identification code. By scanning this code, the Ring app can identify your camera and provide tailored instructions and optimisation tips for your particular model. This personalised approach ensures that you can make the most of your Ring Pan-Tilt camera and its various features.
Additionally, scanning the QR code may also provide you with access to exclusive offers or additional benefits associated with your purchase. It serves as a gateway to unlocking the full potential of your Ring device, allowing you to take advantage of the latest software updates, enhanced security features, and any promotional perks that may be available. So, make sure you don't skip this step and carefully follow the on-screen instructions during the setup process.
Where Do Cars Drain From? Floor Pan Plugs Explained
You may want to see also
Explore related products
Choose a location and mark screw holes
To choose an appropriate location for your Ring Pan-Tilt Indoor Cam, look for a level surface with 6.5 inches (16.5 cm) of space in every direction. This space is necessary to ensure the camera can be properly adjusted and moved. Once you've found a suitable spot, grab your mounting plate and hold it against the wall with the UP arrow pointing opposite to your desired viewing direction.
Now, you're ready to mark the screw holes. Using the mounting plate as a guide, mark the screw holes on the wall with 6.5 inches (16.5 cm) of space in every direction. This ensures that the mounting plate will be centred and secured properly. Make sure to use a level tool to verify that the mounting plate is straight before marking the holes. If you're installing on stucco, brick, or concrete, use a 3/16 inch (5mm) masonry bit to drill holes for the included wall anchors.
After marking the screw holes, the next step is to drill the holes and insert the wall anchors. Use a drill bit that is appropriate for the surface you are drilling into. For stucco, brick, or concrete, the recommended drill bit size is 3/16 inch (5mm). Carefully drill the holes at the marked locations, making sure they are straight and deep enough for the wall anchors to be securely inserted. Once the holes are drilled, insert the provided wall anchors into the holes. Make sure they are tightly secured and able to bear the weight of the mounting plate and camera.
Before securing the mounting plate, it is recommended to run the power cable through the hole in the mounting bracket and plug it into the camera. This ensures that the camera has power and avoids the need to drill additional holes for the cable. Align the mounting plate with the screw holes and use the appropriate screws to attach it securely to the wall. Make sure the mounting plate is level and firmly attached before proceeding to the next step of securing your camera to the mounting bracket.
Finding the Pan Coefficient: A Simple Guide
You may want to see also
Explore related products
Install the mounting plate
To install the mounting plate of your Ring Pan-Tilt Indoor Cam, start by positioning the mounting plate with the "UP" arrow pointing in the opposite direction of your desired viewing direction. If you're installing the camera on stucco, brick, or concrete, use a 3/16 inch (5mm) masonry bit to drill holes for the included wall anchors.
Next, you'll need to mark the screw holes on the wall. Use the mounting plate as a guide, ensuring there is 6.5 inches (16.5 cm) of space in every direction. Drill the holes and insert the wall anchors.
Now, you can secure the mounting plate to the wall by screwing it into the anchors. Make sure the mounting plate is level and firmly attached to the wall.
Once the mounting plate is secure, you can run the power cable through the hole in the mounting bracket and plug it in. You may need to anchor the power cable to the wall or ceiling using the included cable clip.
Adjusting Recipes: Bigger Pans, Bigger Flavors
You may want to see also
Explore related products
Drill holes for wall anchors
To install the Ring Pan-Tilt Indoor Cam, you will need to drill holes for wall anchors if you are installing the camera on a stucco, brick, or concrete wall.
First, install the mounting plate with the UP arrow pointing opposite to your desired viewing direction. Then, use a 3/16 inch (5mm) masonry bit to drill holes for the included wall anchors. Ensure that you have marked the screw holes on the wall with 6.5 inches (16.5 cm) of space in every direction.
After drilling the holes, you can secure the camera to the mounting plate by sliding it in place until you hear a click. Plug in the power cable and anchor it to the wall or ceiling using the included cable clip.
For other types of walls, you may not need to drill holes for wall anchors. The above instructions are specifically for stucco, brick, or concrete walls, which require drilling and wall anchors for a secure installation.
Greasing Pans: Should You Grease the Sides?
You may want to see also
Explore related products
Secure the camera to the mounting bracket
To secure the camera to the mounting bracket, follow these steps:
First, run the power cable through the hole in the mounting bracket and plug it in. Ensure that the mounting plate has been installed with the "UP" arrow pointing in the correct direction. If installing on stucco, brick, or concrete, use a 3/16 inch (5mm) masonry bit to drill holes for the included wall anchors.
Next, take your camera and slide it onto the mounting bracket until you feel a click, indicating that it is securely attached. Now, slide the camera and bracket assembly onto the mounting plate until you again feel a click, locking the two together.
Finally, use the mounting plate as a guide to mark screw holes on the ceiling with 6.5 inches (16.5 cm) of space in every direction. This will ensure that your camera is securely fastened to the ceiling and won't move or shift once installed.
Transmission Pan Fluid Capacity for Trailblazer
You may want to see also
Frequently asked questions
This installation guide is for the Pan-Tilt Mount for your Outdoor Cam, which was formerly known as the Stick Up Cam (3rd Gen). Unfortunately, the adapter is not included.
Before setting up your Pan-Tilt Indoor Cam, download the Ring app and scan the QR code on your device.
Install the mounting plate with the UP arrow pointing in the opposite direction of your desired viewing angle. If installing on stucco, brick, or concrete, use a 3/16 inch (5mm) masonry bit to drill holes for the included wall anchors.
Run the power cable through the hole in the mounting bracket and plug it in. Secure your camera to the mounting bracket by sliding it into place until you feel a click.
The "rectangler" section of the tilt-mount piece acts as the battery pack and fits inside the camera chamber after the battery is removed.
![SETUP Clear Hard Plastic Cups/Tumblers [9 oz. Squat - 200 Count] Small Disposable Party Cocktail Glasses](https://m.media-amazon.com/images/I/71qfkpM7FqL._AC_UL320_.jpg)
![SETUP [160 Count] Disposable Silverware, Silver Combo Cutlery - 80 Forks, 40 Spoons, 40 Knives - Heavy Duty, and Durable Silver Plastic Silverware Set Great for Parties, Events and Everyday use](https://m.media-amazon.com/images/I/61Aaoi3T8RL._AC_UL320_.jpg)
![SETUP Clear Hard Plastic Cups/Tumblers [5 oz. Squat - 200 Count] Small Disposable Party Cocktail Glasses](https://m.media-amazon.com/images/I/71pjOJqIM-L._AC_UL320_.jpg)
![SETUP [160 Count] Disposable Silverware, Gold Combo Cutlery - 80 Forks, 40 Spoons, 40 Knives - Heavy Duty, and Durable Gold Plastic Silverware Set Great for Parties, Events and Everyday use](https://m.media-amazon.com/images/I/711SRo9NiLL._AC_UL320_.jpg)
