Emilie Meyer
If you want to zoom in or pan your videos in HitFilm without creating a lot of composites, there are a few methods you can use. One way is to split the video, scale it up or down, and then split it again whenever you want to zoom in or out. Another method is to animate a scale or movement by keyframing the video transform properties. This can be done directly from the editor without the need to create composite shots. The Zoom In effect is a HitFilm Pro exclusive that starts with the layer reduced in size and gradually increases it to its intended size.
| Characteristics | Values |
|---|---|
| Zoom In | The layer is initially reduced in size and then increases to its intended size |
| Zoom Out | Split the video, scale it up or down, and split again when needed |
| Easier method | Keyframing can be done without creating composite shots |
Explore related products
What You'll Learn
Using the Zoom In effect
The Zoom In effect is a HitFilm Pro exclusive feature that allows you to start with a reduced-size layer, making it appear far away, and then gradually increase its size until it reaches the desired scale. This effect is particularly useful when you want to draw attention to a specific element in your video or create a sense of movement and depth.
To use the Zoom In effect in HitFilm, follow these steps:
- Open your video project in HitFilm and navigate to the layer you want to apply the zoom effect to.
- Right-click on the layer and select "Behaviour" from the menu.
- From the list of behaviours, choose "Zoom In."
- Adjust the settings for the Zoom In effect to achieve the desired result. The "Reveal Length" setting determines the percentage of the total layer duration used to increase the layer's size from the start of its duration.
- Preview your work to see the Zoom In effect in action.
It's important to note that the Zoom In effect is applied to a specific layer within a composite shot. If you want to zoom in on your entire video, you may need to create a composite shot that encompasses your entire footage. Additionally, you can keyframe the video transform properties to animate the scaling or movement of your video without the need for creating multiple composite shots.
By utilising the Zoom In effect and keyframing techniques, you can create dynamic and engaging videos with smooth zoom transitions, all within the HitFilm software.
Burned Pots, Pans: Cleaned!
You may want to see also
Explore related products
Scaling video up or down
To scale your video up or down in HitFilm, you can use the Zoom In effect, which is a HitFilm Pro exclusive. This effect starts with the layer reduced in size, making it appear far away, and then increases the size until it reaches the intended size. This can be used on any layer in a composite shot.
To achieve this effect, you can either split the video, scale it up or down, and split again whenever you want to make adjustments. Alternatively, you can animate a scale or movement by keyframing the video transform properties. This can be done directly from the editor without the need to create composite shots.
To access the relevant controls, go to the Transform tab under the Import Preview window. There are also numerous tutorials available on YouTube that can provide a more detailed guide on this topic, as well as introductory videos to HitFilm (HF) that can be helpful for beginners.
By following these steps and utilizing the available resources, you can easily scale your video up or down in HitFilm without creating tons of composites.
Underbelly Pan: Necessary Protection?
You may want to see also
Splitting video
Splitting a video is an editing technique that allows you to show multiple shots on the screen at the same time. This can be useful for storytelling, showing simultaneous events, or conveying a sense of place. HitFilm offers several ways to split your videos.
One method is to use the "Split Screen Masking" effect. This feature allows you to quickly and easily add complex split screens to your videos. To use this effect, first create a new composite shot containing all the clips you want to include in your split screen. Then, go to the "Effects > Generate" folder and apply "Split Screen Masking [Layer only]" to the top clip. Use the preset dropdown menu to choose the desired split screen type, such as asymmetric, diagonal, or gridded. You can then select a clip for each split using the "Input Layers/Frames > Input" parameters. The "Border" option lets you add divider lines with customizable width, colour, and alpha settings. Each split acts as an "Input Layer," making it easy to position and scale your videos using the transform handles in the Viewer.
Another approach to splitting your video is through keyframing. This technique allows you to animate scale or movement without creating composite shots. To do this, simply split your video, scale it up or down, and split it again whenever you want to make adjustments. You can then keyframe the video transform properties to animate the scale or movement. The transform tab under the import preview window provides all the controls you need for this process.
Additionally, HitFilm enables you to create split screens in the editor or by using available effects. This often begins by placing your chosen clips on the timeline or by using composite shots. Composite shots are particularly useful when you want to combine and contain multiple clips that can be inserted into the timeline as needed. From there, you can utilize layer masks to create screen splits and even add dividers for a more polished look.
By understanding and utilizing these video-splitting techniques in HitFilm, you can enhance your video projects and engage your audience in new and creative ways.
Crock-Pot Hot Dogs: Keeping Buns Fresh and Toasty
You may want to see also
Keyframing without composite shots
Keyframing is a process in HitFilm that allows you to animate changes to a layer over time. While full keyframing is only available on composite shot timelines, you can still perform basic keyframing in the Editor sequence to adjust properties like opacity and volume.
To keyframe without composite shots in HitFilm, follow these steps:
- Go to the Transform Tab: In the Import Preview window, locate and open the Transform tab. Here, you'll find all the controls needed for keyframing.
- Animate Scale or Movement: If you want to zoom in or out, you can animate a scale or movement by keyframing the video transform properties. This allows you to adjust the size and position of your video over time.
- Add Keyframes: On the timeline, identify the specific frames where you want to make changes. To add a keyframe to a frame without changing settings, click the "Add/Remove Keyframe" button. This adds a keyframe at the playhead, using the property's value on that frame. If you already have a keyframe on that frame, clicking the button will remove it.
- Duplicate Keyframes: If you need to duplicate keyframes, hold CTRL (CMD on Mac) and drag the existing keyframes to a new location. This creates a duplicate set while keeping the original keyframes in position.
- Navigate Between Keyframes: Once you have multiple keyframes, you can quickly move between them on the timeline. Use the Previous/Next Keyframe controls at the top of the timeline to jump your playhead between keyframes for the selected property.
- Interpolation: You can adjust how HitFilm interpolates or animates between keyframes. Right-click on selected keyframes and explore the Interpolation menu. The options include "Linear" for direct interpolation and "Smooth" for a gradual adjustment into and out of the keyframe.
By following these steps, you can perform basic keyframing without the need for composite shots in HitFilm. This allows you to make simple animations and adjustments to your video's properties, such as zooming and panning, without the complexity of composite shots.
Campfire Cooking: Pan Safety
You may want to see also
Animating scale or movement
Step 1: Understand Keyframing
Keyframing is a powerful tool in video editing that enables you to define specific properties, such as scale or position, at certain points in your video timeline. By setting keyframes, you can automatically animate the transition between these defined points, creating smooth and seamless movements or transformations.
Step 2: Prepare Your Video Clip
Open your video clip in the HitFilm editor. To animate scale or movement effectively, it's important to have a clear idea of the portion of the video you want to focus on. Decide on the specific area you want to zoom into or the direction in which you want to pan.
Step 3: Set Initial Keyframes
Move the playhead to the point in the timeline where you want to start your animation. Adjust the scale or position of your video clip to the desired initial state. Set your first keyframe by selecting the "Keyframe" option in the video transform properties. This locks in the initial settings for your animation.
Step 4: Adjust and Set Subsequent Keyframes
Move the playhead forward in the timeline to where you want the animation to reach its peak or where you want to complete the panning movement. Adjust the scale or position accordingly to achieve the desired effect. Set another keyframe to define the endpoint of the animation. You can add additional keyframes along the timeline to fine-tune the animation and create more complex movements.
Step 5: Review and Refine
Play back your video to see the animated scale or movement in action. If needed, adjust the timing of the keyframes or tweak the scale and position settings to perfect the animation. You can also experiment with easing options to control the acceleration and deceleration of the animation for a more polished result.
Additional Tips:
- When zooming in on a specific area, ensure that the position point of the video is moved to the middle of the desired area before setting your keyframes. This ensures that the scaling is focused correctly.
- HitFilm also offers a Crop, Pan, and Zoom effect, which can be explored as an alternative or complementary tool to keyframing for achieving similar effects.
Brasier Pan: Roasting Pan Substitute?
You may want to see also
Frequently asked questions
You can split the video, scale it up or down, and split again whenever you want to zoom in or out. You can also animate a scale or movement by keyframing the video transform properties.
Keyframing can be done from the editor and does not require composite shots. It is a process that allows you to animate a scale or movement.
Go to the transform tab under the import preview window to access the controls for keyframing.
The Zoom In effect starts with the layer reduced in size, making it appear far away. The size of the layer then increases until it reaches the intended size.
