Amana Bx21vw: Removing The Drip Pan Easily

If you need to remove the drip pan from your Amana BX21VW refrigerator, you may first need to remove the back or front panel to access it. The drip pan is not removable, and is located between the compressor and the condenser coil. If you need to remove it, you will have to crack it and then replace it with a new one. Alternatively, you can place a towel from the back of the refrigerator to soak up the water and clean the drip pan.

The drip pan is not removable

The drip pan for an Amana BX21VW is not removable. It is located between the compressor and the condenser coil. If you need to remove it, you will have to crack it and then replace it with a new one.

If the drip pan is full or overflowing, the easiest way to empty it is to place a towel in it from the back, behind the cardboard, and let the towel soak up the water. It shouldn't get full because the defrost water is supposed to be evaporated by the heat from the condenser coils and air from the condenser fan.

The drip pan is usually located at the back or front bottom of the fridge. You may have to remove the back or front panel to access it.

It's located between the compressor and condenser coil

The drip pan in an Amana BX21VW refrigerator is located between the compressor and the condenser coil. It is not designed to be removed, so if you need to take it out, you will have to break it and then replace it with a new one.

To access the drip pan, first, pull the refrigerator away from the wall. Then, turn off the power to the fridge. If your Amana refrigerator has a lower back panel, remove it. The drip pan is located between the compressor and the condenser coil.

If you need to empty the drip pan, you can place a towel in it from the back, behind the cardboard, and let the towel soak up the water. Alternatively, you can try to lift the pan up and out over the condenser coils. However, please note that this may require some force and manoeuvring as the space is tight.

To access the drip pan, you may need to remove the back or front panel

To access the drip pan of your Amana BX21VW, you may need to remove the back or front panel. The drip pan is usually located at the back or front bottom of the refrigerator.

If the drip pan is at the back, you will need to first disconnect the water and power supply. Pull the fridge away from the wall and locate the water supply control. Turn it off so that it does not leak. Then, unplug the fridge to avoid any accidental electric shocks. Next, locate the screws or hex bolts holding the back panel at the bottom of the fridge in place. Use a screwdriver or hex wrench to rotate the screws counter-clockwise to loosen them. Once all the screws are removed, carefully pull the back panel off the fridge and set it aside. Remember to keep the screws in a small bowl or container so that you do not lose them.

If the drip pan is at the front, you will need to open the fridge doors to access the top of the kick panel, which is the slotted grate at the bottom of the fridge. Use a putty knife to slide between the fridge and the kick panel to pop it off. Once one side of the kick panel pops out, pull it off completely and set it aside.

After removing the back or front panel, you should be able to see the drip pan, which should look like a small rectangular tray. Grab the drip pan with both hands and try pulling it out without tipping it over. If the drip pan is removable, it should come out easily.

Clean the drip pan with bleach to avoid excessive bacteria growth

To clean the drip pan with bleach and avoid excessive bacteria growth, first locate the drip pan. The drip pan in your refrigerator captures defrosted ice from your freezer so that it doesn't leak in your kitchen. Check the refrigerator's manual to find where the drip pan is located. Drip pans are usually located in the front or rear of your fridge, but it may vary depending on the model you have.

If your drip pan is located at the rear of the fridge, pull your fridge out from the wall so you can access it. Find the water supply control if your fridge has one and turn it to the off position so that it doesn't leak. Then, unplug your fridge so you don't accidentally shock yourself while working on the interior components. Unscrew the back panel if the drip pan is at the rear. Locate the screws or hex bolts that hold the back panel on the bottom of your fridge in place. Use a screwdriver or a hex wrench to rotate the screws counterclockwise to loosen them. Once you've removed all of the screws, carefully pull the back panel off the fridge and set it aside.

If your drip pan is located at the front of the fridge, open the doors on your fridge so you can access the top of the kick panel, which is the slotted grate on the bottom of the fridge. Slide a putty knife between your fridge and the kick panel to pop it off. Once you pop one side of the kick panel out, pull it completely off of the fridge and set it aside.

Now, look inside the back or kick panel to find the drip pan, which should look like a small rectangular tray. Grab the drip pan with both hands and try pulling it out without tipping it over. If your drip pan can be removed, then it will come out of the fridge easily. Otherwise, it cannot be removed and you must clean it while it's still inside your fridge.

If your drip pan is removable, empty the pan if it's full of water. While the heat from inside your fridge should cause the water in the drip pan to evaporate, there still may be standing water inside. Pour the water down your sink drain to get rid of it. After emptying the drip pan, set it in your sink so you can start cleaning.

To clean the drip pan, mix one part bleach with two parts warm water in a clean spray bottle and shake it up so it's thoroughly mixed. Spray the drip pan so it's completely wet and let the bleach solution sit on the surface for 2-3 minutes. Spray extra cleaner on any mold or mildew you see building up on the drip pan to help loosen it and disinfect the area.

After a few minutes, wipe the inside of the drip pan with a cleaning rag to remove the cleaner. Work from one side of the drip pan to the other so you don't spread any mold around. Apply a firm amount of pressure while you scrub the drip pan to break apart any built-up residue. You can also use paper towels if you don't want to get any mold on fabric cleaning rags.

Rinse the drip pan under warm water to remove any remaining cleaner. Hold the drip pan under your faucet and let warm water run over it. Rinse the entire drip pan so there isn’t any cleaner left on the surface. Use another rag or sponge to wipe it off if there’s still any residue. Dry the drip pan before reinstalling it. Use a cleaning towel or paper towels to wipe the pan dry. Make sure there aren't any water droplets on the pan or else it could develop mold again when you reinstall it. Once the drip pan is dry to the touch, slide it back into your fridge and replace the panels so you can use it again.

To remove, you may need to crack it and then replace it with a new one

To remove the drip pan from an Amana BX21VW refrigerator, you may need to crack it and then replace it with a new one. This is because the drip pan is not designed to be easily removable. It is located between the compressor and the condenser coil, and accessing it may require removing the back or front panel of the refrigerator.

Before attempting to remove the drip pan, it is important to note that it is responsible for collecting and managing the condensation produced during the cooling process. Without the drip pan, water would drip directly onto the system and cause damage. Therefore, if you need to remove the drip pan, it is crucial to replace it with a new one as soon as possible.

Additionally, it is worth mentioning that cracks can naturally develop in a drip pan over time, or they can be caused by forceful contact. In either case, a cracked drip pan will allow water to leak out and onto the system, potentially causing damage.

To prevent issues with the drip pan, it is recommended to schedule a tune-up for your system annually. During the tune-up, a professional can inspect the drip pan and the condensate drain line for any signs of leaks or clogs and address them before they become more serious problems.

Frequently asked questions