Frigidaire Ad-18: Removing The Drip Pan Easily

how to remove drip pan from frigidaire ad-18

If you want to remove the drip pan from your Frigidaire AD-18, you'll first need to locate it. Drip pans are usually found at the bottom of the fridge, and can typically be accessed by removing the toe grille or kick panel. However, some models may have the drip pan located at the back of the fridge, near the compressor. It's important to consult your refrigerator's manual to determine the exact location of the drip pan and whether it is removable. Once you've located the drip pan, you may need to disconnect the power cord and water supply before attempting to remove it. Keep in mind that some drip pans may not be easily removable, and you may need to clean them while they're still inside the fridge.

Characteristics Values
Location of drip pan Bottom of the Frigidaire refrigerator
How to access the drip pan From the back of the refrigerator or by removing the kick panel at the bottom
Removability Not easily removable; may require tipping the refrigerator on its side or back
Cleaning method Emptying and cleaning with a bleach or vinegar solution
Cleaning frequency Every 3 months or twice a year

cycookery

Locate the drip pan at the back of the fridge

To locate the drip pan at the back of the fridge, you will need to first pull the fridge away from the wall. This will give you access to the back of the fridge.

Once you have located the drip pan, you can proceed to remove it for cleaning. However, please note that some Frigidaire models have a non-removable drip pan. If this is the case, you will need to find other ways to clean it, such as by spraying or pouring water with a mould cleaner/killer diluted in it. Alternatively, you can try to suck out the water with a shopvac or turkey baster.

If your drip pan is removable, you will need to unplug the fridge and remove all the shelves and drawers. Then, tip the fridge over and locate the two screws that hold the drip pan in place. Unscrew these screws and remove the drip pan for cleaning. Remember to let the fridge stand upright for at least as long as it was on its side before plugging it back in.

Stainless Steel Pans: Best Value Options

You may want to see also

cycookery

Disconnect the power cord

To disconnect the power cord of your Frigidaire AD-18, follow these steps:

First, locate the power cord. It is typically attached to the back of the appliance, where it plugs into an electrical outlet. Ensure that the power cord is easily accessible and there are no obstructions blocking your access to it.

Before disconnecting the power cord, it is crucial to turn off the appliance. Locate the power button and switch it to the "Off" position. If there is no power button, you can unplug the appliance directly from the electrical outlet.

Once the appliance is turned off, you can safely disconnect the power cord. Grasp the power cord firmly and gently pull it out of the electrical outlet. Be careful not to pull or twist the cord forcefully, as this may cause damage. If the power cord is difficult to remove, check for any clamps or fasteners that may be securing it in place and release them before unplugging.

After disconnecting the power cord, it is important to properly store it to prevent damage. Avoid placing heavy objects on the cord or stepping on it. If the cord is coiled, try to uncoil it gently to avoid kinks or tangles. Store the power cord in a dry and safe location, away from heat sources or areas where it may be accidentally pulled or tripped over.

It is always recommended to refer to the user manual for specific instructions related to your Frigidaire AD-18 model. The manual will provide detailed information about the power cord, including its location, proper handling, and any safety precautions that need to be followed during the disconnection process.

Blue Diamond Pans: Dishwasher-Safe?

You may want to see also

cycookery

Remove the drip pan

To remove the drip pan from a Frigidaire AD-18, first locate the drip pan. It is typically found at the bottom of the refrigerator, and you can spot it by removing the toe grille.

If the drip pan is at the back of the refrigerator, you will need to pull the refrigerator out from the wall. Then, disconnect the power cord from the outlet. Locate the drip pan near the compressor at the back of the refrigerator. Grasp both sides of the pan and pull it outwards to remove it.

If the drip pan is at the front of the refrigerator, open the doors of the fridge so you can access the top of the kick panel (the slotted grate at the bottom of the fridge). Slide a putty knife between the fridge and the kick panel to pop it off. Once one side of the panel is loose, pull it off completely and set it aside. Then, locate the drip pan and try pulling it out without tipping it over.

Some drip pans cannot be removed, in which case you will have to clean it while it is still inside the fridge.

cycookery

Clean the drip pan

To clean the drip pan of your Frigidaire AD-18, you will first need to remove it. The drip pan is located at the bottom of the appliance, near the floor. To access it, you will need to remove the grill on the front of the refrigerator and slide the pan forward.

Once you have removed the drip pan, follow these steps to clean it:

  • Fill your sink with hot water and add a few drops of dishwashing liquid that includes a grease-cutting ingredient. You can also use distilled white vinegar or a solution of vinegar and baking soda.
  • Place the drip pan in the sink and allow it to soak for at least 10 minutes. If there is severe grime, you may need to soak it for longer.
  • After soaking, use a sponge or dishcloth to wipe down the drip pan. For tough spots, use a scrub brush or a melamine sponge.
  • Rinse the drip pan with hot water and dry it thoroughly with a microfiber cloth or towel.

It is recommended to clean your drip pan regularly, especially if you notice any spills or splatters. A dirty drip pan can result in foul odours and mould growth. Additionally, it is important to ensure that there is proper airflow around your refrigerator to prevent condensation and water overflow in the drip pan.

Baidu Pan: Safe or Not?

You may want to see also

cycookery

Reinstall the drip pan

To reinstall the drip pan, ensure that it is completely dry. Then, slide the pan back into the refrigerator. If your drip pan is located at the back of the fridge, replace the back panel by screwing it back into place. If your drip pan is located at the front of the fridge, pop the kick panel back into place. Finally, plug your fridge back in.

Aluminum Cookware: Alzheimer's Risk?

You may want to see also

Frequently asked questions

Tipping the fridge may be necessary to access the drip pan. It is recommended to consult the manual or seek advice from a professional before attempting to tip the fridge.

The drip pan is typically located at the bottom of the fridge, accessible by removing the toe grille or kick panel.

It is recommended to clean the drip pan every three months or at least twice a year to prevent the buildup of mould or unpleasant odours.

Empty any standing water from the drip pan. Then, use a cleaning solution, such as a mixture of bleach and warm water, to spray or wipe down the pan. Scrub the pan with a non-abrasive brush or cloth to remove any encrusted debris. Finally, rinse the pan with warm water and dry it thoroughly before reinstalling it.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment