Easy Ways To Clean Sesame Oil From Your Pan

Removing sesame oil from a pan can be tricky due to its strong scent and the potential for stains. To start, try washing the pan with dish soap and a dash of ammonia, as ammonia breaks the oil bonds to help with cleaning. If that doesn't work, try using vinegar, Lestoil, or baking soda. You can also try making a paste with baking soda and water to scrub the pan. For clothes, Lestoil is a good option for removing oil and grease stains and odours.

Try vinegar to clean up the oil

Vinegar is a great natural cleaning agent that can be used to clean up oil stains from pans. Here is a step-by-step guide on how to do this:

Step 1: Fill the Pan with Water and Vinegar

Fill your dirty pan with equal parts water and vinegar. For a more concentrated solution, you can use two parts vinegar to one part water. The amount of liquid you use will depend on the size of your pan. As a general guideline, use about two cups of water and one tablespoon of vinegar for a standard-sized pan.

Step 2: Bring the Mixture to a Boil

Place the pan on the stovetop and turn on the heat. Heat the water and vinegar solution until it reaches a rolling boil. This will help loosen the oil stains and make them easier to remove.

Step 3: Add Baking Soda (Optional)

Adding a tablespoon of baking soda to the boiling water and vinegar solution can enhance its cleaning power. The baking soda will react with the vinegar, creating a fizzing action that can help lift away stubborn oil stains. However, be cautious when adding the baking soda as it may cause a somewhat explosive reaction. Slowly sprinkle in the baking soda while the mixture is boiling.

Step 4: Let it Soak

Remove the pan from the heat and let the solution soak for a few minutes. This will allow the vinegar and baking soda to work their magic and loosen any remaining oil residue. For heavily soiled pans, you can let the solution soak for up to 15 minutes.

Step 5: Scrub the Pan

Use a wooden spatula or a scouring pad to scrub away any remaining oil stains. The wooden spatula is gentle on the pan's surface while still providing enough abrasion to remove the stains. If you're using a non-stick pan, opt for a softer sponge or cloth to avoid damaging the coating.

Step 6: Rinse and Wash

After scrubbing, rinse the pan with warm water to remove any residual vinegar, baking soda, and oil. Then, wash the pan with mild dish soap and a soft sponge as you would normally do. Ensure that you rinse away all the soap and dry the pan thoroughly before storing it away.

Using vinegar is an effective and natural way to clean up oil stains from pans. It is a mild acid that breaks down grease and oil, making it easier to remove. Additionally, vinegar is a safe and non-toxic alternative to harsh chemical cleaners. By following these steps, you can easily remove sesame oil stains from your pan and have it looking like new again!

Use Lestoil to remove oil/grease stains and odours

Lestoil is a heavy-duty cleaner that can be used to remove grease and stains from various surfaces. It is a concentrated cleaner, so a little goes a long way. When removing grease stains from laundry, follow these steps:

• Put a small amount of Lestoil onto the greasy stain, enough to saturate the area.
• Let it penetrate the stain for at least 5-10 minutes. For tough stains, you can let it sit for several days.
• Toss the item into the washer and launder in the hottest water recommended for that clothing type.
• Use an extra rinse cycle to get rid of any remaining oil residue and to help rinse out the Lestoil odour.
• Line dry the item. Once it is completely dry, check to ensure the stain is gone. If not, repeat the process.

Lestoil can also be diluted with water and used to clean grimy floors or wipe down kitchen cabinets. For large jobs like cleaning tile or linoleum floors, dilute about one cup of Lestoil in a bucket of hot or warm water.

Lestoil is also useful for a variety of chores in workshops and the garage. It can be used to remove grease and oil stains from concrete garage floors, to clean engines, and to prep walls for painting.

Wash with dish soap and a dash of ammonia

To remove sesame oil from a pan, washing it with dish soap and a dash of ammonia is an effective method. This method is especially useful for stainless steel pans, as ammonia can be too harsh for other types of pans. Here is a step-by-step guide:

Step 1: Prepare the Cleaning Solution

Fill the pan with hot water and add a generous amount of dish soap. Next, add a small amount of ammonia to the mixture. Be cautious when handling ammonia, as it is a strong chemical. Ensure the room is well-ventilated, and wear protective gloves if possible.

Step 2: Soak the Pan

Let the pan soak in the cleaning solution for several hours or overnight. The longer it soaks, the more effective it will be at loosening the burnt-on oil.

Step 3: Scrub the Pan

After soaking, use a sponge or scrubber to gently scrub the pan. The ammonia and dish soap mixture should have loosened the oil residue, making it easier to remove. If needed, use a mild abrasive, such as baking soda, to help scrub away any remaining oil.

Step 4: Rinse and Dry

Once the pan is free of oil residue, thoroughly rinse it with clean water to remove any soap or ammonia residue. Dry the pan completely before storing it or using it again.

It is important to note that while ammonia is effective at removing burnt-on oil, it should be used sparingly and with caution. Always follow safety guidelines when handling ammonia or other strong chemicals. Additionally, always test a small area of the pan first to ensure that the ammonia does not damage the pan's finish.

Baking soda can help remove the smell

Baking soda is a natural, inexpensive ingredient that can be used to remove the smell of sesame oil from a pan. It is an alkaline substance that neutralises the acids that cause bad smells.

To use baking soda to remove the smell of sesame oil from a pan, follow these steps:

• Sprinkle baking soda directly onto the affected area of the pan.
• Let the baking soda sit for at least 24 hours. Baking soda typically takes at least 24 hours to absorb odours, but for stubborn smells, it may take several days.
• After the baking soda has absorbed the odour, use a damp cloth or sponge to wipe away the powder, along with the neutralised odour.

In addition to using baking soda on its own, you can also create a baking soda and vinegar solution to help remove the smell of sesame oil from a pan. Here's how:

• Sprinkle baking soda liberally inside your pan.
• Pour white vinegar over the baking soda. The chemical reaction between the two will help break down the odour-causing compounds.
• Scrub the pan with a sponge to remove any remaining residue and scum.
• Rinse the pan with water and dry it thoroughly.

By following these simple steps, you can effectively use baking soda to remove the smell of sesame oil from a pan.

Wash with detergent such as Palmolive

To remove sesame oil from a pan, wash it with a detergent such as Palmolive. Here's a step-by-step guide:

• Fill the sink with hot water: Start by filling your sink with hot water. The water temperature should be as high as you can get it without scalding your hands. Hot water will help to dissolve the oil and grease more effectively.
• Add detergent: Once the sink is filled, squirt a generous amount of Palmolive dish soap into the water. Palmolive is a powerful detergent that will cut through the grease and help to emulsify the sesame oil, making it easier to wash away.
• Soak the pan: Place the pan in the sink, ensuring it is fully submerged in the soapy water. Let it soak for 15-20 minutes. This will give the detergent time to work on breaking down the oil.
• Scrub the pan: After soaking, take a sponge or scrub brush and vigorously scrub the pan, paying particular attention to the areas with the most oil residue. The detergent will have loosened the oil, and you should see it start to come away as you scrub.
• Rinse and dry: Once you've scrubbed the pan thoroughly, rinse it under hot water to remove any remaining detergent and oil residue. Dry the pan with a clean cloth or let it air dry before putting it away.

By following these steps and using a detergent like Palmolive, you can effectively remove sesame oil from your pan, leaving it clean and ready for your next cooking adventure.

Frequently asked questions