Emilie Meyer
If you're looking to replace the meat pan in your GE Profile refrigerator, you're in luck! Genuine GE replacement meat pans are available for purchase. Before replacing the meat pan, it is important to take precautions and ensure that the refrigerator is unplugged to avoid any accidents. The drip pan, which collects excess water, condensation, and other liquids, is usually located at the bottom of the fridge, near the compressor. To access the drip pan, you will need to remove the protective cover at the back of the refrigerator, which is typically held in place by screws or clips. Once you have a clear view of the drip pan, gently lift and wiggle it to detach it from the hooks or tabs that secure it in place. Be cautious not to use excessive force to avoid damaging the drip pan or surrounding components. After successfully replacing the meat pan, reattach the protective cover and screws or clips, and plug the refrigerator back into the power outlet.
| Characteristics | Values |
|---|---|
| Step-by-step instructions | Available online |
| Part name | Meat Pan Assembly |
| Part number | WR32X10868 |
| Part type | GENUINE GE replacement part |
Explore related products
What You'll Learn
GE meat pan replacement parts are available
If you need to replace the meat pan in your GE refrigerator, you're in luck—replacement parts are available! When searching for GE appliance parts, it's important to have your appliance's exact model number handy, as nearly all GE appliance parts are specific to the model of the appliance. You can usually find the model number on the rating plate or rating label for your appliance, labelled as "MOD" or "MODEL". GE model numbers always begin and end with a letter of the alphabet.
Once you have your model number, you can search for the correct replacement meat pan for your refrigerator. One option for a replacement meat pan is the WR32X10868 GE Refrigerator Meat Pan Assembly, which is a new, genuine GE replacement part. You can also find step-by-step instructions on how to replace the meat pan assembly on a GE refrigerator.
It's recommended that you use only genuine GE parts to repair your appliance. Genuine GE parts are backed by a one-year limited warranty, and you can have confidence that the part you're buying is supported by a reputable brand. Counterfeit parts and water filters have become readily available, but these imitation parts are often produced outside of consumer protection laws and regulations.
You can find genuine GE parts at over 350 APDA member locations nationwide, but beware of individuals or internet auction sites claiming to sell genuine GE parts—these products are likely counterfeit, stolen, or simply not genuine.
Pots and Pans: Induction Cooktop Compatibility
You may want to see also
Explore related products
Unplug the refrigerator and empty its contents
Before you start working on your GE Profile refrigerator, it is important to take some necessary precautions. Firstly, unplug the refrigerator from the power outlet to avoid any accidental electric shocks. This is a crucial step for your safety and should not be skipped or rushed. It is also a good idea to secure a bench or chair about 5 feet in front of the refrigerator. This will provide stability and prevent the refrigerator from tipping forward when you are working on it.
The next step is to empty the contents of the refrigerator and freezer compartments. This is important because you will need to access the back of the appliance to reach the drip pan. By emptying the contents, you ensure that you have enough space to work and can avoid any spills or damage to your food items. Make sure to transfer perishable items to a cooler or another refrigerator to keep them fresh and avoid food waste.
When the refrigerator is unplugged and emptied, you can proceed to locate the drip pan. In most GE Profile refrigerator models, the drip pan is located at the bottom of the refrigerator, near the compressor. The compressor is a large black component responsible for regulating the temperature inside the appliance. The drip pan is usually positioned just below the compressor and is attached to the back panel of the refrigerator.
Once you have identified the location of the drip pan, you are ready to begin the removal process. To access the drip pan, you will need to remove the protective cover at the back of the refrigerator. This cover is typically secured in place with screws or clips. Carefully use a screwdriver or pliers to unscrew or detach the fasteners. With the cover removed, you will have a clear view of the drip pan and its attachment to the refrigerator.
The Best Way to Clean Your Tefal Pan
You may want to see also
Explore related products
Remove the protective cover at the back of the refrigerator
To remove the protective cover at the back of the refrigerator, you will need to first unplug the appliance from the power outlet. This is important to avoid any accidental electric shocks. Next, you will need to empty the contents of the refrigerator and freezer compartments.
Now, you can begin to remove the protective cover. This cover is typically held in place by screws or clips. Using a screwdriver or pliers, carefully unscrew or detach the clips. Be gentle and careful during this process to avoid damaging any components. Once you have successfully removed the cover, you will have clear access to the drip pan and its attachment to the refrigerator.
The drip pan is usually positioned just below the compressor, attached to the back panel of the refrigerator. It is designed to collect excess water, condensation, and other liquids that accumulate within the appliance. After removing the protective cover, you can proceed with detaching and cleaning the drip pan.
Once you have completed the necessary tasks requiring access to the drip pan, remember to reattach the protective cover securely. Use the screws or clips that were previously removed to fix the cover back in place. Ensure that all screws or clips are tight to maintain a secure seal and prevent any future issues.
Dipstick Depth: How Far Is Too Far?
You may want to see also
Explore related products
Gently lift and wiggle the meat pan to disengage it
To gently lift and wiggle the meat pan to disengage it, start by locating the drip pan within your GE Profile refrigerator. The drip pan is usually found behind the protective cover at the bottom of the refrigerator, near the compressor. The compressor is a large, black component that regulates the temperature inside the appliance. Once you've found it, you can begin the removal process.
Before attempting to remove the drip pan, it is important to take some necessary precautions. Firstly, unplug the refrigerator from the power outlet to avoid accidental electric shocks. Then, empty the contents of the refrigerator and freezer compartments, as you will need access to the drip pan by removing the protective cover at the back of the appliance.
Now, gently lift and wiggle the drip pan to disengage it from the hooks or tabs that secure it to the back panel of the refrigerator. Be cautious not to use excessive force, as this may damage the drip pan or surrounding components.
Once the drip pan is removed, you can proceed to clean it thoroughly. Over time, it can accumulate dirt, dust, and food debris, leading to unpleasant odors or potential mold growth. Start by rinsing it with warm water to remove any loose debris.
Measuring Up: 9x13 Pan's QT Capacity Explored
You may want to see also
Explore related products
![[Upgraded] W10861519 Deli Drawer Hanger, Refrigerator Meat Drawer Shelf Holder for Whirlpool WRT148/WRT311/WRT318, Replaces W10628698, 4382323, AP5999492](https://m.media-amazon.com/images/I/418VSTrYGKL._AC_UL320_.jpg)
Clean the meat pan with warm water
While cleaning the meat pan with warm water, it is important to note that GE refrigerators manufactured after 1987 have a built-in drip pan that is difficult to access and cannot be removed. If your GE refrigerator was manufactured before 1987, you can access the drip pan by removing the front grille.
To clean the meat pan with warm water, first, remove the pan from the refrigerator. If there is any standing water in the pan, pour it out. Use a sponge or cloth to wipe away any residue or leftover food particles. Next, fill the sink with warm water and add a mild detergent or dish soap. Place the meat pan in the sink and let it soak for a few minutes. Use a soft-bristled brush or sponge to gently scrub the pan, paying special attention to any areas with stuck-on food or stains. Rinse the pan thoroughly with warm water to remove any soap residue. Finally, dry the meat pan with a clean cloth or paper towel before placing it back in the refrigerator.
For more thorough cleaning or to address stubborn stains, there are several methods you can try. One method involves using baking soda and vinegar. Sprinkle baking soda liberally over the surface of the meat pan, ensuring that all areas are covered. Next, pour white distilled vinegar or apple cider vinegar into the pan until it covers the baking soda. The mixture will begin to fizz and bubble. Allow it to sit for a few minutes, then use a sponge or soft-bristled brush to gently scrub the pan. Rinse the pan with warm water and dry it thoroughly before returning it to the refrigerator.
Another method for tackling stubborn stains is to use lemons. Cut one or two lemons in half and squeeze the juice into the meat pan. Place the squeezed lemon halves into the pan as well. Fill the pan with warm water, ensuring that the lemons are fully submerged. Let the pan soak for about 10 minutes, then remove the lemons and use them to rub the sides and bottom of the pan. The acid in the lemons will help to break down any remaining residue or stains. Finally, rinse the pan with warm water and dry it thoroughly before returning it to the refrigerator.
Additionally, dishwasher tablets can be used to clean the meat pan. Fill the sink with warm water and place a dishwasher tablet in it. Allow the tablet to dissolve slightly, then place the meat pan in the sink and let it soak for a few minutes. Use a soft-bristled brush or sponge to gently scrub the pan, as the warm water and dishwasher tablet will help lift grease and stuck-on food. Rinse the pan thoroughly with warm water to remove any soap residue and ensure that all traces of the dishwasher tablet are gone. Dry the meat pan with a clean cloth or paper towel before placing it back in the refrigerator.
Uncovering the Secrets of Vintage Cast Iron: A Guide to Dating Your Pan
You may want to see also
Frequently asked questions
To replace the meat pan in your GE refrigerator, you will first need to locate and remove the old meat pan. The drip pan is usually located behind a protective cover at the bottom of the refrigerator, near the compressor. Once located, remove the cover and any retainer clips, then gently lift and wiggle the pan to disengage it from the hooks or tabs. Finally, insert the new meat pan by securing it onto the hooks or tabs and replacing the protective cover.
GE Profile refrigerators manufactured after 1987 have a fixed drip pan that is not easily accessible and cannot be removed. If your refrigerator was made before 1987, the drip pan can be removed by taking off the front grill.
If you notice any abnormalities, such as water pooling or strange smells, it is recommended to seek professional assistance as there may be an underlying issue with your refrigerator.
![[Upgraded] W10861519 Deli Drawer Hanger (Without Glass), Meat Drawer Shelf Compatible with whirlpool Refrigerator WRT311/WRT318/WRT148 Some models (not all), Replaces: W10628698, AP5999492](https://m.media-amazon.com/images/I/511LTdDzrYL._AC_UL320_.jpg)
