Honda Passport: Oil Pan Bolt Size Revealed

The oil pan bolt on a Honda Passport is 17mm. This is the same for all current generations of Honda vehicles. The bolt is located on the right side of the vehicle, pointing towards the rear, and is best accessed from behind the front-right wheel. The engine oil drain plug torque is 39Nm / 29ft-lb.

The bolt is 17mm

The bolt on the oil pan of a Honda Passport is 17mm. This is the size of the socket and ratchet you will need to remove and install the drain plug. The drain plug is located under the oil pan at the bottom of the engine.

To change the oil on a Honda Passport, first let the old oil drain out by removing the oil drain plug. Then, identify and remove the oil pan bolt on the motor mount. Gently remove the old oil pan, being careful not to damage the oil pickup located inside. Clean the engine block surface and the old oil gasket, then fix the new oil pan gasket in place and align the new oil pan correctly. Tighten each bolt according to the manufacturer's specifications, then reinstall the oil drain plug and refill the engine with new oil.

The Honda Passport uses 6 quarts of 0W-20 oil. It is recommended to use a torque wrench when tightening the drain plug, with a torque of 39Nm / 29ft-lb. The engine oil filter element part number is 15400-PLM-A02 or equivalent, and the engine oil drain plug washer is 94109-14000 (14mm).

It is important to change your vehicle's oil regularly and to use the correct tools and parts to avoid damage to your engine.

The bolt's torque is 39Nm

The bolts on your Honda Passport's oil pan require a torque of 39Nm to be tightened effectively. This is an important specification to adhere to, as it ensures the bolts are tight enough to keep the oil pan secure but not so tight that they risk being stripped or damaged.

When tightening bolts to a specific torque, it is essential to use a torque wrench. This tool allows you to apply precise amounts of force, ensuring the bolts are tightened correctly. Begin by consulting your owner's manual or a repair guide to identify the location of the oil pan and its bolts. Once you have located the oil pan, use the torque wrench to tighten each bolt to the specified torque of 39Nm. It is good practice to tighten the bolts in a crisscross or star pattern, ensuring an even distribution of force and preventing warping or damage to the oil pan.

It is worth noting that the torque specification for the oil pan bolts may vary slightly depending on the make and model of your Honda Passport. While 39Nm is a common value, some models may require a slightly different torque. Always refer to the official specifications for your specific vehicle to ensure you are using the correct torque value.

Additionally, it is important to consider the condition of the bolts and oil pan. If the bolts or oil pan show signs of corrosion or damage, they may need to be replaced. Over-tightening bolts that are already weakened can lead to stripping or breakage. Similarly, if the oil pan gasket is worn or damaged, it should be replaced to prevent oil leaks.

By following the correct torque specification and maintenance procedures, you can help ensure the oil pan of your Honda Passport remains secure and leak-free, contributing to the overall performance and longevity of your vehicle.

The bolt is located under the oil pan

The drain plug bolt, located under the oil pan, is used to drain out the old oil. When replacing the oil pan, it is necessary to start by undoing this bolt to allow the oil to drain completely. This is an important step in the process of changing the oil, as it ensures that the old oil is removed before adding new oil.

The Honda Passport, being a mid-size SUV known for its reliability and comfort, may require an oil pan bolt replacement due to normal wear and tear or accidental damage. The bolt size for the Honda Passport's oil pan drain plug is M14-1.50 Thread, with a 17 mm head. This bolt size is consistent across different models and years of the Honda Passport.

When performing maintenance or repairs on your Honda Passport, it is crucial to refer to the user manual or consult a professional mechanic to ensure that all procedures are carried out correctly and safely.

The bolt is removed with a 1/2 ratchet

The bolt on your Honda Passport's oil pan can be removed with a 1/2 ratchet. Here are some steps and tips to help you with the process:

Preparation:

Before you begin, make sure you have the right tools and safety equipment. In addition to the 1/2 ratchet, you'll need items such as safety goggles, gloves, and a suitable workspace. It's also important to consult your vehicle's user manual to familiarise yourself with the oil pan bolt locations and any specific manufacturer recommendations.

Removing the Bolt:

• Use the correct socket size: Ensure that you're using a socket that fits properly and securely onto the bolt. A snug fit is important to prevent rounding or stripping the bolt.
• Apply penetrating fluid: If the bolt is particularly tight, applying penetrating fluid can help loosen it.
• Turn counter-clockwise: To loosen the bolt, turn it counter-clockwise. This is an important distinction to remember, especially when working upside down, as turning it the wrong way can tighten the bolt further.
• Use a wrench or breaker bar: If the ratchet alone isn't providing enough force, you can attach a wrench or breaker bar to the ratchet for additional leverage.
• Apply upward force: If the bolt is stubborn, try applying upward force or wedging a tool like a screwdriver under the bolt to help dislodge it.
• Use vice grips: If the bolt is still stuck, try attaching vice grips and gently turning and pulling outward.
• Try a bolt extractor socket: A bolt extractor socket is designed to grip and release stuck bolts. You may need to gently hammer it onto the bolt before turning it with a ratchet.
• Drill the bolt: As a last resort, you can try drilling the bolt out. Use a small drill bit and drill straight down the centre of the bolt. Drilling in reverse may help pull the bolt out.

After Removal:

Once the bolt is removed, it's important to inspect the threads and gasket for any damage. If the threads are stripped or the gasket is worn, you'll need to replace them. Before reinstalling a new bolt, make sure to clean the area thoroughly and refer to the manufacturer's specifications for torque and tightening instructions.

Remember to work carefully and consult a professional mechanic if you're unsure about any part of the process.

The bolt is replaced with a new oil change

To replace the bolt, start by letting the old oil drain out completely. Then, identify the engine oil pan bolt locations on the motor mount, making sure to double-check the bolt count. After removing the old bolt, clean all debris from the engine block surface. You may need to use a chisel, being careful not to damage the engine block components.

Next, scrape off any residual matter on the old oil gasket and replace it with a new one. Align the new engine oil pan correctly and tighten each bolt according to the manufacturer's specifications. Finally, change the oil filter, add new motor oil, and start the vehicle, ensuring no oil leaks.

It is important to use the correct bolt size for your Honda Passport. The standard engine oil drain plug bolt size for the Honda Passport is M14-1.50 Thread with a 17 mm Head. You can find these bolts at auto parts stores or online. When replacing the bolt, make sure to torque it to the specified 39 Nm / 29 ft-lb.

By following these steps and using the correct bolt size, you can ensure a secure and leak-free engine oil pan for your Honda Passport.

Frequently asked questions