Lipstick Melt: Pan Size Needed

Lipstick can be melted into a pan to create a new lipstick or to form a palette of different colours. This can be done by cutting off a small amount of lipstick and melting it over a candle, in the microwave, or on a double boiler. The lipstick should be monitored closely to ensure it does not boil or burn. Once melted, the lipstick can be mixed with other colours and poured into a pan to cool and solidify. The size of the pan will depend on the amount of lipstick being melted, with 26mm pans being suitable for one lipstick.

How to melt lipstick without ruining its consistency

If you want to melt your lipstick without ruining its consistency, there are several methods you can use. Here are some detailed, step-by-step instructions:

Using a Microwave:

• Scrape the lipstick out of its container using a hairpin, spatula, or a small knife. Place the lipstick in a microwave-safe container, such as a small pot or jar.
• Add a tiny bit of Vaseline or lip balm to the container if you prefer a more moisturising base.
• Put the container in the microwave for 15-30 seconds. Check if the lipstick has melted completely. If not, microwave in 15-20 second intervals until it has. Be careful not to overheat the lipstick, as this can separate its oxides and glitter.
• Once melted, mix the new mixture with a lip brush or toothpick to ensure it is properly combined.
• Before it cools, clean the edges of the container with a paper towel.
• Enjoy your new lipstick! It can be applied with a lip brush or your finger.

Using a Candle:

• Place the lipstick that has been sliced into pieces onto a large metal spoon.
• Light a candle. Hold the metal spoon containing the broken lipstick over the candle until the lipstick has melted.
• Pour the melted lipstick into a clean, empty, heat-proof container.

Using a Lighter:

• Scrape the lipstick out of its container.
• Place the lipstick onto a metal spoon.
• Hold a lighter under the spoon until the lipstick has melted.
• Pour the melted lipstick into a clean, empty, heat-proof container.

Tips to Prevent Ruining Consistency:

• Do not overheat the lipstick. Overheating can cause separation of its oxides and glitter, changing its consistency.
• Be mindful of the quantity of lipstick and adjust heating time accordingly. For an entire lipstick, start with 30 seconds in the microwave and then adjust as needed.
• If using a microwave, heat in short intervals and stir in between. This helps ensure even melting and prevents overheating.
• If using a candle or lighter, constantly move the spoon in a circular motion to ensure even heating and prevent overheating.

Size of Pan for Melting Lipstick:

Regarding the size of the pan, it seems that the size of the pan depends on the amount of lipstick you are melting. A small pot or jar is usually sufficient for melting lipstick, as mentioned in the previous instructions. However, if you are looking for specific pan sizes, some sources suggest using empty metal pans or lip balm containers to melt and reshape your lipstick.

Using a microwave to melt lipstick

Melted lipstick can be used to create a new lipstick or tinted lip balm with a custom colour. This can be done by mixing lipsticks or combining lipstick with a lip balm. This is a good way to reuse old, unusable lipsticks or use up the last bit of lipstick left in the tube.

Steps

• Scrape the lipstick out of its container using a hairpin or spatula.
• Put the lipstick in a small, microwave-safe container.
• (Optional) If you want to add Vaseline or lip balm to the mixture, do so now.
• Place the container in the microwave for a few seconds. The time will depend on the quantity of lipstick—for an entire lipstick, start with 30 seconds and then microwave in 15-20 second intervals until the lipstick is melted. Be careful not to let the lipstick boil.
• Once the lipstick is melted, mix the new mixture with a lip brush or toothpick to ensure it is well combined.
• Before it cools, clean the edges of the jar with a paper towel.
• (Optional) If you want to put the lipstick into a wind-up lipstick container, follow the steps below:

• Clean out an old lipstick container.
• Find a pen or other cylindrical object that fits inside the container.
• Wrap foil around the object and flatten one end.
• Transfer the melted lipstick to the foil tube and secure it.
• Blast it with a hairdryer to melt the lipstick and ensure it lies flat in the container. Be careful, as hairdryers can get very hot.
• Leave the lipstick to cool. You can put it in the freezer to speed up this process.
• Unwrap the lipstick and place it in the container.

Tips

• Never let the lipstick boil in the microwave, as this will separate its oxides and glitter.
• If you don't have access to a microwave, you can melt the lipstick on a stove or using a lighter.
• If you want to make a tinted lip balm, you can combine leftover lipstick with lip balm or beeswax and olive/almond oil.

Using a candle to melt lipstick

To melt lipstick with a candle, you will need a hairpin or mini spatula, paper towels, a small pot or jar, a lip brush or toothpick, and a candle.

First, use a hairpin to scrape the lipstick from the container into a small heat-safe pot or jar. If you have any broken lipsticks, add those to the container, too. You can also add a tiny bit of Vaseline to the mixture for a more moisturising base. Place the container with the lipstick pieces onto a large metal spoon and hold it over a lit candle until the lipstick has melted. Be careful not to overheat the lipstick—heat it in short intervals, stirring in between, until you reach the desired consistency.

Once the lipstick is melted, mix the new mixture with a lip brush or toothpick to ensure it is well combined. Before it cools, clean the jar edges with a paper towel. You can then apply the lipstick with a lip brush or your finger.

You can also get creative and combine two or more different colours to make a new shade. If you want to make a lipstick in stick form, you will need an empty lipstick container and a pen or similar object the size of the lipstick you want to make. Wrap foil around the pen or cylinder, then flatten one end. Transfer the melted lipstick to the tube and stabilise it somehow, as a hairdryer or the heat from the candle might knock the tube over. Leave it to cool, then remove the foil and insert the new lipstick into its container.

If you are looking to melt lipstick into a pan, the size of the pan will depend on the amount of lipstick you are looking to melt. You can use empty metal pans, or even small sample containers, to pour the melted lipstick into.

How to avoid over-heating lipstick

When it comes to lipstick application, there are a few things to keep in mind to avoid overheating the product. Firstly, it is important to choose the right formula. Opt for a matte lipstick instead of a shiny or glossy one, especially during the summer or in hot weather. Layering too many coats of lipstick can also lead to a goopy mess, so if reapplication is needed, it is best to start with a clean slate by wiping off any remaining product before applying a new layer.

To avoid overheating your lipstick during storage or transportation, there are several precautions you can take. Lipstick can melt and deform when exposed to high temperatures, so it is crucial to store your lipstick in a cool, dry place, away from direct sunlight or sources of heat. Keeping your lipstick in a fridge or mini skincare fridge is an effective way to maintain its freshness, longevity, and consistency. Additionally, ensure that the lids of your lipstick containers are always securely closed, as heat and humidity mixing with the formula can result in a gooey, sticky texture.

If you are planning to melt lipstick for custom colours or to transfer it into a different container, extra care must be taken to avoid overheating the product. Cut the lipstick into small pieces and place them in a heat-safe container. Use a microwave or a double boiler to gently melt the lipstick in short intervals of 15 to 30 seconds, stirring in between. Lipstick solidifies quickly at room temperature, so a more liquid consistency is desired. Be cautious not to overheat the lipstick, as this can affect its performance and appearance, making it difficult to apply and potentially altering the shade.

To summarise, preventing lipstick from overheating involves smart formula and application choices, proper storage, and cautious handling during any melting processes. By following these guidelines, you can maintain the integrity and longevity of your lipstick while also reducing the risk of bacterial growth.

How to mix different lipsticks to create a new colour

If you want to mix different lipsticks to create a new colour, you can use the melting method. This involves breaking off pieces of lipstick with a makeup spatula and melting them in a small, heat-safe container. You can use a microwave or a double boiler for this. If you're using a microwave, heat the lipstick in 15-30 second intervals, stirring in between, until it reaches a liquid consistency.

Once your lipstick is melted, add your other chosen colours a small amount at a time, heating further to melt and stirring to combine. When you're happy with the colour, pour the mixture into a small, resealable makeup container and leave to cool. You can then apply the lipstick with a brush.

If you want to make a lipstick in stick form, you will need an empty lipstick container and a pen or similar object the size of the lipstick you want to make. Wrap foil around the pen or cylinder, then flatten one end. Transfer the completed custom lipstick to the tube and leave to cool.

You can also mix lipstick shades by applying them directly to your lips. It's best to use shades from the same colour family, such as two different shades of red or pink. Apply one shade to your bottom lip and the other to your top lip, then rub your lips together to blend. You can use a lip brush to evenly distribute the colour.

Frequently asked questions