Air Frying With Drake's Batter: A Tasty Treat?

Drakes Batter Mix is a versatile product that can be used to create a variety of dishes, from onion rings to chicken strips and fish fillets. While the product is typically deep-fried or pan-fried, some people have experimented with using it in an air fryer. The key to success appears to be ensuring that the food item is moist enough for the batter to stick and that the air fryer is set to a high temperature, ideally 400 degrees Fahrenheit.

Using Drake's batter in an air fryer: a step-by-step guide

Step 1: Prepare your ingredients

Before you start, ensure you have all the necessary ingredients to hand. For chicken, you will need chicken breasts, buttermilk, and Drake's Crispy Frymix. For fish, you will need firm white fish fillets, olive oil, and Drake's Crispy Frymix.

Step 2: Prepare your air fryer

Spray your air fryer basket with olive oil. This will help to prevent your food from sticking to the basket.

Step 3: Prepare your food

If you are cooking chicken, cut the breasts into strips. If you are cooking fish, rinse and pat dry the fillets, ensuring they remain slightly damp.

Step 4: Apply the batter

For chicken, dip the strips in buttermilk, then coat with the dry Crispy Frymix. Repeat this process, dipping the strips in buttermilk and coating with Frymix once more. For fish, place the fillets and Frymix into a ziplock bag and shake until the fillets are covered.

Step 5: Remove excess batter

For chicken, once coated, place the strips on a baking rack to allow any excess Frymix to fall off. For fish, place the fillets on a baking rack in the same way.

Step 6: Cook your food

Set your air fryer to 400 degrees. For chicken, spray the coated strips with oil on both sides. For fish, place the fillets in the air fryer and spray lightly with olive oil. Cook for 10 minutes, then turn the fillets and cook for a further 7 minutes.

Step 7: Serve

Remove your food from the air fryer and serve. For chicken, you may wish to serve with a sweet and sour sauce. For fish, tartar sauce is a good option. Enjoy!

The best temperature to set your air fryer to when using Drake's batter

The Best Temperature to Set Your Air Fryer When Using Drake's Batter

When using Drake's batter in an air fryer, it is recommended to set the temperature to 400 degrees Fahrenheit. This temperature setting is specifically mentioned in a recipe for air-fried fish on the Drake's Batter Mix Co. website.

The recipe involves coating fish fillets with the batter and then placing them in the air fryer, which has been preheated to 400 degrees. The cooking time is 10 minutes on the first side and 7 minutes on the second side.

It is worth noting that some people have successfully used Drake's batter in an air fryer at a high temperature without specifying the exact degree. One user reported that they coated chicken strips with the batter and then placed them in the air fryer, although they did not mention the temperature setting.

When using Drake's batter in an air fryer, it is important to ensure that the food being cooked is coated evenly and that there is some moisture present. This can be achieved by spraying the air fryer basket with olive oil or dipping the food in water before coating it with the batter.

Additionally, it is recommended to place the battered food on a baking rack before putting it in the air fryer to allow any excess batter to fall off. This will help ensure a crispier final product.

Chicken strips: a recipe for air fryer success

Chicken strips are a classic comfort food, and with an air fryer, they can be made healthier and with less oil. Here is a recipe for crispy and delicious chicken strips using Drake's batter mix in an air fryer.

Ingredients

• Chicken breasts, boneless and skinless
• Drake's Crispy Frymix
• Buttermilk
• Oil (olive oil or another type of cooking oil)
• Optional: spices and seasonings of your choice

Instructions

• Cut the chicken breasts into strips, about 1/4 to 1/2 inch thick.
• Prepare the batter by mixing Drake's Crispy Frymix with buttermilk. You can also add some spices or seasonings to the batter if desired.
• Dip the chicken strips into the batter, making sure they are fully coated.
• Optional: For an extra crispy coating, dip the battered chicken strips into a bowl of dry Drake's Crispy Frymix, shaking off any excess.
• Place the battered chicken strips into the air fryer basket, making sure they are in a single layer and not overlapping.
• Spray the chicken strips lightly with oil. You can use a spray bottle or a brush to coat them evenly.
• Set the air fryer to 400 degrees Fahrenheit.
• Cook the chicken strips for about 10 minutes on each side, or until they are golden brown and cooked through. The exact cooking time may vary depending on your air fryer, so keep an eye on them to avoid overcooking.
• Once done, remove the chicken strips from the air fryer and serve them with your favorite dipping sauces.

Tips for Success:

• Don't overcrowd the air fryer basket. Cook the chicken strips in batches if needed to ensure even cooking.
• For extra crispy chicken strips, spray the air fryer basket with oil before placing the chicken strips inside.
• If you prefer a drier coating, you can let the battered chicken strips sit for a few seconds after dipping, allowing the batter to become more dry and batter-like.
• Always ensure your chicken is fully cooked before serving. Use a meat thermometer to check that the internal temperature of the chicken has reached 165 degrees Fahrenheit.

With these tips and the recipe above, you'll be well on your way to air-fried chicken strip success! Enjoy the crispy, juicy, and healthier version of this classic dish.

Drakes batter in an air fryer: do you need to add oil?

Yes, you can use Drake's batter in an air fryer. However, the process is slightly different from using a deep fryer or pan. After coating your food with the batter mix, you need to add a small amount of oil. You can spray the food with oil on both sides or add a teaspoon of oil to the batter. Alternatively, you can use the batter as a dry mix, like flour, but you will need to marinate or dip the food in egg first to help the batter stick.

Drake's batter is usually cooked by deep frying or pan-frying. However, some people have tried using it in an air fryer with good results. The key to success is ensuring that the batter is moist and thin so that it sticks to the food and browns properly.

When using an air fryer, it is recommended to set the temperature to 400 degrees Fahrenheit, regardless of the recipe or the instructions in the air fryer manual. This temperature setting ensures that the batter cooks through and achieves the desired crispiness.

For example, to make air-fried fish using Drake's batter, you should first spray the air fryer basket with olive oil. Then, rinse and pat dry the fish fillets, leaving them slightly damp. Place the batter and fish in a ziplock bag and shake until the fillets are coated. Place the fillets on a baking rack to allow any excess batter to fall off, then place them in the air fryer. Lightly spray the fillets with olive oil and cook at 400 degrees Fahrenheit for 10 minutes on one side and 7 minutes on the other.

In conclusion, while Drake's batter is not specifically designed for air frying, it can be successfully used in an air fryer by adding a small amount of oil and following the recommended temperature settings.

Other foods you can cook with Drake's batter in an air fryer

Yes, you can use Drake's batter in an air fryer. One user reported that they "did chicken strips with it. Dip chicken in water then coat with Drakes. Let it sit for 15 to 20 seconds until Drakes looks wet like batter. Then put it in the air fryer."

Chicken

If you're looking for a healthier alternative to deep-frying, you can use Drake's batter to coat chicken pieces before air frying. Cut chicken breasts into strips or nuggets, dip them in water, and then coat them with the batter. Place the chicken pieces in the air fryer basket and cook at a high temperature until crispy and cooked through.

Fish

For crispy fish fillets, you can use Drake's batter in a similar way to chicken. Cut firm white fish fillets in half, rinse, and pat them dry. Place the fish and batter in a ziplock bag and shake until the fillets are coated. Place the coated fillets on a baking rack to allow any excess batter to fall off, then place them in the air fryer basket. Spray lightly with olive oil and cook at 400 degrees Fahrenheit, for 10 minutes on one side and 7 minutes on the other.

Vegetables

You can also use Drake's batter to create crispy vegetable dishes in your air fryer. Cauliflower florets, broccoli, Brussels sprout halves, carrot coins, and sweet potato chunks are all great options. Dip the vegetables in a wet dredge of water, oil, cornstarch, and flour before air frying. This will give them a remarkably crunchy texture. You can serve these crispy vegetables with a variety of sauces, such as barbecue sauce, teriyaki, or marinara.

Frequently asked questions