Cody Casey
Filmora is a powerful video editor that comes with an array of video effects, transitions, titles, and various options to share creations. It is used to create a Ken Burns Effect, which makes the video or image slowly zoom in on specific subjects and pan from one to another. To pan and zoom in Filmora, you must first select a clip in the timeline and then click the Crop Pan button in the Viewer. Next, click the Pan Zoom button in the Viewer, and the full image will be automatically scaled to fit the screen. Two crop boxes will appear to show the start and end locations along with the motion path between them.
| Characteristics | Values |
|---|---|
| Definition of Pan and Zoom | A 'Pan' is when the camera moves right and left between two subjects while filming, and a 'Zoom' is when the camera either moves closer to one part of the frame or uses a zoom lens for a close-up. |
| Purpose | To make the camera appear to zoom in or out of a clip, gradually revealing specific subjects in the video. |
| Steps | 1. Select a clip in the timeline. 2. Click the Crop Pan button in the Viewer. 3. Click the Pan Zoom button in the Viewer. 4. Adjust the crop boxes and motion path as desired. 5. Preview the animation. 6. Swap the start and end areas if needed. 7. Save the Pan and Zoom effect. |
| Additional Tips | Ensure the aspect ratio of the zoom-in video matches the selected output format. Smaller output dimensions are recommended for better quality. |
Explore related products
What You'll Learn
Accessing the Pan & Zoom tool
Selecting the Clip
Firstly, select the desired video clip in the timeline. This can be done by simply clicking on the clip you want to edit.
Accessing the Viewer Panel
Once you have selected your clip, you need to access the Viewer Panel. Here, you will find the Crop Pan button, which is essential for activating the Pan & Zoom tool. The Viewer Panel is where you will make most of the adjustments to your clip.
Activating the Pan & Zoom Tool
With the clip selected and the Viewer Panel open, click on the Crop Pan button. This will activate the Pan & Zoom effect, and you will notice a few changes. The full image of your clip will be scaled to fit the screen, and you will see a white crop box appear, indicating the extent of the crop area.
Adjusting the Crop Boxes
At this point, you will see one or two crop boxes, depending on your preferences and the version of Filmora you are using. These crop boxes represent the start and end locations of the Pan & Zoom effect. You can reposition and resize these boxes directly in the Viewer. To move a box, click and drag it to the desired position. To resize, click and drag the edge of the box.
Previewing the Animation
After adjusting the crop boxes, you can preview the animation by clicking the Play button in the Viewer. This will give you a better idea of how the Pan & Zoom effect will look in your video.
Swapping Start and End Locations
If you need to swap the start and end locations of the Pan & Zoom effect, simply click the Reverse Motion button. This will instantly swap the positions of the crop boxes.
Saving the Effect
Once you are happy with the preview of your Pan & Zoom effect, it is important to save your work. Click the OK button to save the effect and apply it to your clip.
Remember to always preview your video before exporting or outputting your final product. With Filmora, you can export your video in various formats, upload it to platforms like YouTube and Vimeo, or even burn it to a DVD.
Best Kitty Litter That Doesn't Stick to Litter Pan
You may want to see also
Explore related products
Setting up the aspect ratio
Step 1: Select Your Video Clip
Begin by selecting the video clip in your timeline that you wish to edit. You can do this by simply clicking on the clip.
Step 2: Access the Crop Tool
With your clip selected, you can now access the Crop Tool. Right-click on the selected clip and choose the "Crop and Zoom" option from the menu, or click on the Crop icon to open the Crop and Zoom panel. This will allow you to adjust the aspect ratio and crop your video.
Step 3: Choose the Aspect Ratio
In the Crop and Zoom panel, you will find various ratio presets to choose from. Select the desired aspect ratio for your video. For example, if you are preparing a video for YouTube, the standard aspect ratio is 16:9. Choose the appropriate ratio that fits your needs and the platform you are creating content for.
Step 4: Adjust the Crop Area
Once you have selected the aspect ratio, you can fine-tune the crop area. A white crop box will appear, which you can adjust in position and size to define the portion of the video that will be visible. You can move and scale this box directly in the viewer to customize your frame.
Step 5: Preview and Save
After adjusting the crop box, deselect the Crop Pan folder to preview your changes. If you are satisfied with the result, click "OK" to save the changes. You can always return to editing by reselecting the Crop Pan folder or button.
Remember that the aspect ratio is just one aspect of the Pan and Zoom effect in Filmora. You can also adjust other settings, such as the start and end locations of the zoom, to create dynamic camera movements within your video. Always preview your video before exporting it to ensure that the aspect ratio and other effects meet your desired outcome.
Creating Stereo Sound: Panning Production for Both Ears
You may want to see also
Explore related products
Previewing the animation
To preview the animation, select a clip in the timeline and then click the Crop Pan button in the Viewer. Next, click the Pan Zoom button in the Viewer. The full image will be automatically scaled to fit the screen.
Two crop boxes will appear, one green and one red, to show the start and end locations along with the motion path between them. The green box shows the start size and location, while the red box shows the end size and location. You can reposition and scale the crop boxes directly in the Viewer. To move a box, click and drag inside it. To scale a box, click and drag its edge.
When you click on a crop box, the playhead will jump to the associated frame. Clicking the green box will jump to the clip's first frame, and clicking the red box will jump to the last frame. You can also click the Play button in the Viewer to preview the animation.
To swap the start and end areas, click the swap button. You can also click the Reverse Motion button to swap the start and end locations. To return to the project preview, deselect the Crop&Pan folder.
Steel Baking Pans: Safe or Not?
You may want to see also
Explore related products
Swapping the start and end areas
To swap the start and end areas of a clip in Filmora, first select a clip in the timeline. Next, click the Crop Pan button in the Viewer. The full image will be automatically scaled to fit the screen, and two crop boxes will appear, showing the start and end locations along with the motion path between them. The green box shows the start size and location, while the red box shows the end size and location.
To swap the start and end locations, click the Reverse Motion button. You can also reposition and scale the crop boxes directly in the Viewer. To move a box, click and drag within it. To scale a box, click and drag the edge. Clicking on a crop box will also allow you to jump to the associated frame.
Once you are happy with the start and end areas, click the Play button in the Viewer to preview the animation. When the preview looks good, click Export. A dialog box will appear, where you can choose to export the video in any popular format or directly to a device.
It is worth noting that the first and last keyframed points are set at the time you apply the Pan & Zoom effect.
Ceramic Cookware: Pots and Pans Guide
You may want to see also
Explore related products
Exporting the video
Once you have successfully applied the Pan and Zoom effect, you can save and export your video. To do this, click on the "Export" button, select the output format and the destination folder, and click "Start".
If you are using Filmora for Mobile, the process is slightly different. First, you will need to tap on the "new project" button to start your zoom project. Then, select the video you want to zoom in on and import it into the timeline. Next, tap on the video below the timeline to access the zoom-in function. You can then tap on the small "arrow" beneath your video to zoom in, or spread your thumb and index finger to zoom in manually. Finally, export your video to your media library and share it.
To zoom out a video using Filmora for Mobile, the process is very similar. First, install Filmora for Mobile from the App Store or Play Store. Then, tap on "new project" to start your zoom project. Next, select the video you want to zoom out on and import it into the timeline. Tap on the video below the timeline to access the zoom-out function. Finally, export your video to your media library and share it.
Parking Rates at Pan Pacific Vancouver
You may want to see also
Frequently asked questions
Panning is when the camera moves right and left, while zooming is when the camera moves closer to a part of the frame or uses a zoom lens for a close-up.
First, select a clip in the timeline and click the Crop Pan button in the Viewer. Next, click the Pan Zoom button in the Viewer. Two crop boxes will appear, showing the start and end locations. You can reposition and scale the boxes directly in the Viewer.
Click the Reverse Motion button to swap the start and end locations.
Click the Play button in the Viewer to preview the animation.
Click the OK button to save the Pan and Zoom effect. Always preview your video before outputting it.
