Ella Walter
The MB-550 trap comes with approximately 3 lbs. of pan tension, and the tension can be adjusted by bending the dog up or down. To decrease the tension, bend the dog down from 1/4 to 1/2 from the notch end. Each 5 degrees that you bend the dog down results in approximately 1/2 lb. less tension.
Characteristics and Values Table for Adjusting Pan Tension on an MP 550
| Characteristics | Values |
|---|---|
| Out-of-the-box pan tension | 3 lbs |
| Method to adjust tension | Bending the dog up or down |
| Method to decrease pan tension | Bending the dog down |
| Amount of decrease in tension | 1/2 pound for every 5 degrees the dog is bent down |
| Recommended amount of bend | 1/4" to 1/2" from the notch end |
Explore related products
What You'll Learn
The MB-550 comes with 3 lbs of pan tension
The MB-550 trap comes with approximately 3 lbs. of pan tension straight out of the box. This is a trap that incorporates a Paws-I-Trip pan system, which allows for tension adjustment by bending the dog up or down. Each 5 degrees that the dog is bent down results in approximately a ½ pound less of tension. For instance, bending the dog 10 degrees down will result in 2 lbs. of pan tension.
To adjust the pan tension on an MB-550, you will need to bend the dog down. This can be done by following the steps outlined below:
- Identify the "dog" of the trap, which is the part of the mechanism that holds the pan in place.
- Using a pair of pliers or similar tool, grip the dog firmly and bend it downwards, away from the notch end.
- It is recommended to bend the dog between ¼” to ½” from the notch end for optimal performance.
- Check the tension by gently pressing down on the pan to ensure it is at the desired level.
- If further adjustment is needed, continue bending the dog in small increments until the desired tension is achieved.
By following these steps, you can easily adjust the pan tension on your MB-550 trap to suit your specific needs. It is important to note that these adjustments are permanent, so it is recommended to make small adjustments and test the trap until you find the optimal tension for your trapping situation.
The MB-550's pan tension adjustability provides a versatile feature that allows trappers to customize their traps according to their preferences and the specific requirements of their trapping endeavours. With this level of customization, trappers can ensure they are using the most effective and efficient trap possible for their unique situations.
Cleaning Cast Iron Popover Pans: A Step-by-Step Guide
You may want to see also
Explore related products
Decrease tension by bending the dog down
The MB-550 trap comes with approximately 3 lbs of pan tension. If you want to decrease the tension, you can do so by bending the dog down. The MB-550 incorporates a Paws-I-Trip pan system, which is tension adjustable. Each 5 degrees you bend the dog down, you will achieve approximately a 1/2 pound less of tension.
It is recommended to bend the dog from 1/4" to 1/2" from the notch end. This will result in a decrease in tension of approximately 2 lbs. The process is simple and permanent.
The Paws-I-Trip pan tension kits are easy to install and compatible with most conventional traps. They provide automatic tension with minimal pan creep and no pan wobble. The tension can be adjusted by bending the special dog up or down.
By following these instructions, you can successfully decrease the pan tension on an MB-550 trap by bending the dog down.
Gas Logs: Do They All Need Sand Pans?
You may want to see also
Explore related products
Each 5 degrees is approximately 1/2 lbs less tension
The MB-550 trap comes with approximately 3 lbs of pan tension. If you want to decrease the pan tension, you can do so by bending the dog down. Each 5 degrees you bend the dog down will result in approximately half a pound less tension. It is recommended to bend the dog from 1/4" to 1/2" from the notch end. For example, bending the dog by approximately 10 degrees will result in 2 lbs of pan tension.
The MB-550 incorporates a Paws-I-Trip pan system, which allows for tension adjustment by bending the dog up or down. Bending the dog down will decrease the tension, while bending it up will increase it. This adjustment method is permanent, so it is important to be careful when making changes to the pan tension.
The ability to adjust the pan tension on the MB-550 trap provides users with greater control over the trapping process. By being able to decrease the tension, trappers can customise the trap to their specific needs and ensure a more effective and efficient trap. This adjustability is a key feature of the MB-550 trap, allowing for a more versatile and tailored trapping experience.
Additionally, understanding the impact of each 5-degree adjustment is crucial. With each 5-degree bend resulting in approximately half a pound less tension, trappers can make precise adjustments to achieve their desired tension level. This knowledge empowers trappers to fine-tune their traps and optimise their trapping strategies.
In conclusion, the MB-550 trap's pan tension adjustability offers a unique advantage to trappers. By understanding the relationship between the degree of bend and the resulting tension change, users can make informed adjustments to achieve their desired trapping outcomes. This level of customisation enhances the overall effectiveness and versatility of the MB-550 trap.
Hot Pot Grill Cleaning: A Step-by-Step Guide
You may want to see also
Explore related products
Bend the dog 1/4 to 1/2 from the notch end
To adjust the pan tension on an MB-550 trap, you can modify the incorporated Paws-I-Trip pan system. This system allows you to adjust the tension by bending the dog up or down. Bending the dog down will decrease the tension, and each 5 degrees you bend it down will reduce the tension by approximately half a pound.
Now, to bend the dog 1/4 to 1/2 from the notch end, you will need to follow these steps:
First, locate the welded seam on the inside of the pipe. This seam will serve as a reference point for your modifications. Mark the seam with a notch or any distinct mark.
Next, you will want to bend the dog. The recommended amount is to bend it from 1/4" to 1/2" from the notch end. This will result in a decrease of approximately 1 to 2 lbs. of pan tension.
It is important to note that the MB-550 traps typically have around 3 lbs. of pan tension when they come out of the box. By bending the dog as instructed, you will achieve a more relaxed tension setting.
Additionally, it is good to be aware that the process of bending the dog is permanent, so ensure you are satisfied with the adjustment before proceeding.
By following these steps and making the necessary adjustments, you will successfully adjust the pan tension on your MB-550 trap by bending the dog 1/4 to 1/2 from the notch end.
Stainless Pan Stained Brown? Here's How to Clean It
You may want to see also
Explore related products
![The Adjustment Bureau [Blu-ray]](https://m.media-amazon.com/images/I/81FNTQnXyyL._AC_UY218_.jpg)
The MB-550 uses a Paws-I-Trip pan system
The Paws-I-Trip pan system is a unique feature of the MB-550 and MB-450 traps, allowing users to easily and permanently adjust the tension to their preferred level. This adjustability provides users with greater control and customization, ensuring a more tailored and efficient trapping experience.
The ability to adjust the pan tension is particularly advantageous for trappers who require lower tension settings. By bending the dog down, users can fine-tune the tension to their specific needs, ensuring optimal performance and effectiveness. This flexibility in tension adjustment makes the MB-550 a versatile and adaptable trapping solution.
The process of adjusting the pan tension on the MB-550 is straightforward and user-friendly. By following the recommended guidelines, users can quickly achieve their desired tension level. The ability to fine-tune the tension ensures a more precise and controlled trapping experience, enhancing the overall effectiveness of the trap.
The MB-550's Paws-I-Trip pan system showcases the trap's design and functionality. With its adjustable tension feature, the MB-550 offers trappers a customizable and versatile solution, catering to a range of specific requirements. By bending the dog up or down, users can easily modify the tension to suit their trapping needs, making it a highly adaptable tool for their trade.
Steel Pan Care Guide
You may want to see also
Frequently asked questions
The MP 550 incorporates a Paws-I-Trip pan system, which allows you to adjust the tension by bending the dog up or down.
To decrease the tension, bend the dog down. For every 5 degrees you bend it down, you will get approximately half a pound less tension.
MP 550 traps usually come with approximately 3 lbs of tension.
We recommend bending the dog from 1/4" to 1/2" from the notch end.
Yes, there are images available online that show a stock trap and a trap with a dog bent to achieve 2 lbs of pan tension.
