Floor Pan Replacement: Cost And Process

The cost of replacing floor pans can vary depending on the extent of the damage, the type of vehicle, and the labour and material costs. For example, the cost of replacing the entire floor pan of a Jeep Cherokee (XJ) can range from $300 to $2000. On the other hand, the cost of replacing a full floor pan in a 1965 Mustang Fastback was estimated to be around $5500, while a Datsun 240z owner offered to replace the floor pans for an additional $2000 on top of the car's price.

It is worth noting that labour costs for floor pan replacement typically depend on the hourly rate and the number of hours required to complete the job. The number of hours can range from 6 to 8 hours or more, depending on the complexity of the work. Additionally, some vehicle owners may opt to replace only a portion of the floor pan, such as the driver's side or passenger side, which can help reduce the overall cost of the repair.

In summary, the cost of replacing floor pans can range from a few hundred to several thousand dollars, depending on various factors such as the vehicle, the extent of the damage, and the labour and material costs involved.

The cost of floor pan replacement parts for a 1965 Mustang Fastback

Firstly, it is important to assess the damage and determine the necessary repairs. In some cases, a full floor pan replacement may be required, while in others, only partial repairs or reinforcement may be needed. The cost of replacement floor pans can range from a few hundred to a few thousand dollars, depending on the quality and source of the parts. For example, a brand new floor pan from a specialised manufacturer like Hawks can cost around $300, while reproduction floor pans from classic car part suppliers may be more affordable but still require additional labour for installation.

Additionally, there are other associated parts and materials that will contribute to the overall cost. This includes items such as torque boxes, toe boards, seat platforms, welding equipment and consumables like grinding discs, primer and paint. These items can quickly add up, with individual parts ranging from $30 to $55 each, and equipment like a MIG welder costing around $500.

Labour costs can vary significantly depending on the complexity of the repairs, the experience of the technician, and the location. Sheet metal labour is typically charged by the hour, with rates ranging from $35 to $45 per hour. The replacement process can take anywhere from 6 to 8 hours, according to one source, or even up to 12-14 hours, according to another, depending on the extent of the work and whether additional repairs are needed. Removing and reinstalling the interior can add a couple of hours to the total labour time.

It is worth noting that some car enthusiasts and owners choose to perform the floor pan replacement themselves to save on labour costs. However, this requires a certain level of skill, tools, and workspace. Seeking quotes from multiple reputable shops and comparing prices can help you make an informed decision.

In summary, the cost of floor pan replacement parts for a 1965 Mustang Fastback can vary widely depending on the specific circumstances and the labour involved. It is essential to carefully assess the damage, obtain multiple quotes, and be prepared for potential additional repairs to ensure a successful restoration project.

The cost of labour for floor pan replacement

• Severity of the Damage: If the damage is limited to a small area, the labour cost will be lower compared to extensive damage that requires replacing multiple components.
• Vehicle Type: Different vehicles have different levels of complexity when it comes to floor pan replacement. For example, vintage or classic cars may require specialised knowledge and skills, increasing the labour cost.
• Location of Repair Shop: Labour rates can vary depending on the geographic location of the repair shop. Urban areas may have higher labour rates compared to rural areas.
• Skill and Experience of Technician: Technicians with more specialised skills and experience in floor pan replacement may charge higher rates.
• Removal of Interior Components: In some cases, it may be necessary to remove interior components such as seats, carpeting, or trim to access the floor pan. This can increase the labour cost.
• Rust and Corrosion: If there is significant rust or corrosion, additional labour may be required to clean, treat, and prepare the affected areas before installing the new floor pan.
• Replacement Parts: The cost of labour may also depend on whether the repair shop provides the replacement parts or if the vehicle owner sources them separately.

It is always recommended to get multiple quotes from reputable repair shops and to ask for a breakdown of the estimated costs, including labour, parts, and any other associated fees. This will help you make an informed decision and ensure you are getting a fair price for the floor pan replacement service.

The cost of floor pan replacement for a Datsun 240z

The cost of floor pan replacement will depend on a number of factors, including the extent of the rust damage, the labour rate of the shop, and whether you choose to replace the entire floor pan or just one side.

In addition to the cost of the floor pan itself, there is also the cost of labour to consider. Replacing a floor pan typically requires 6-8 hours of labour, and the labour rate can vary depending on the shop and the experience of the technician. Sheet metal labour rates typically range from $35-45 per hour. If you choose to replace only one side of the floor pan, the cost of labour may be slightly lower.

It is also important to consider the cost of any additional materials that may be needed, such as welding equipment and rental car fees. If you are unable to drive your car during the repair, you may need to rent a car, which can cost around $250 per week.

Overall, the cost of floor pan replacement for a Datsun 240z can range from $1000 to $2800 or more, depending on the extent of the damage, the labour rate, and the quality of the floor pan. It is always a good idea to get multiple quotes from different shops to ensure you are getting a fair price.

The cost of floor pan replacement for a Jeep Cherokee

If you choose to hire a professional, the cost can range from $300 to $2000 or more, depending on the extent of the damage and the number of floor pans being replaced. Some forum users have reported quotes of $900 for both rocker panels and $1600 for the driver's side rocker panel replacement. Others have paid around $500 for a full floor replacement, including parts and labour.

Doing it yourself can be significantly cheaper, with floor pans available for as little as $65 each, and the job taking as little as an afternoon to complete if you have the right tools and skills. However, it's important to note that floor pan replacement can be a complex job, especially for those without welding experience, and it's crucial to ensure the structural integrity of the vehicle is maintained.

Before deciding on a course of action, it's recommended to remove the seats, centre console, and carpet to fully assess the extent of the damage. Getting quotes from multiple body shops and shopping around for the best deals on parts can also help you save money.

Additionally, it's worth noting that floor pan replacement may not be necessary in all cases. Smaller rust holes can often be patched up with sheet metal and sealed, which can be a more cost-effective solution if the damage is not extensive.

The cost of floor pan replacement parts for a Jeep Cherokee

For Jeep Cherokee models manufactured between 1974 and 1983, Classic 2 Current Fabrication offers complete rear floor pans for both the left-hand (LH) and right-hand (RH) sides, as well as front floor pans for both sides. These parts are also available for the Jeep Grand Cherokee models of the same year range.

For the 1984-1991 Jeep Grand Cherokee, Classic 2 Current Fabrication offers complete rear floor pans for both the LH and RH sides.

For the 1984-1992 Jeep Grand Cherokee, Classic 2 Current Fabrication offers complete rear floor pans for both the LH and RH sides.

For the 1984-2001 Jeep Cherokee, Classic 2 Current Fabrication offers factory-style front and rear floor pans for both the LH and RH sides, as well as a front cab floor pan and a rear cargo area floor pan. Key Parts also offers a half front floor pan for the 1984-2001 Jeep Cherokee XJ, which includes phone tech support for the life of the product and a satisfaction guarantee.

The cost of these replacement parts varies depending on the manufacturer and retailer, but they typically range from a few hundred to a few thousand dollars. It is important to note that labour costs for installation are not included in the price of the parts and can vary depending on the complexity of the job and the rates of the mechanic or body shop.

Frequently asked questions