Raptor Liner Coating For Jku Pan

Raptor Liner is a versatile product that can be used for more than just the beds of pickup trucks. It can be used to coat the interior and exterior of vehicles, as well as for non-automotive purposes. The amount of Raptor Liner needed for a JKU pan depends on various factors, such as the thickness of the application, air pressure, and speed of application. Some people have reported using 2 quarts for the interior of their Bronco, while others have used up to 6 quarts for the same purpose. It is recommended to buy the 4-quart kit, as it comes with a gun and is a better deal overall.

The amount of Raptor Liner needed depends on the thickness of application

The amount of Raptor Liner you need for your JKU pan depends on the thickness of the application. The manufacturer, U-pol, recommends 7-10 mil thickness per coat with a minimum of two coats. Their specification calls for at least an 18.5 mil thickness overall. This is about four times the thickness of a heavy tarp or billboard cover.

The amount of Raptor Liner you need also depends on the area you want to cover. For example, if you are only doing the Poison Spyder front and rear bumpers, you will need less than if you were to cover the full interior of the vehicle.

The amount of Raptor Liner you use will also depend on the application method. For example, if you use a paint roller, you may use more than if you use a spray gun, as thicker areas can develop with a roller.

The amount of Raptor Liner you need will also depend on the number of coats you apply. Most people recommend two coats, with the first being a very light coat and the second being thicker. However, some people have achieved good results with just one coat.

The amount of Raptor Liner you need may also depend on the colour you choose. U-pol offers Raptor Liner in black, white, and tintable shades. If you choose a pre-mixed colour, you will not need to mix the colour yourself, but if you choose a tintable shade, you will need to mix the colour yourself, which may affect the amount of Raptor Liner you need.

In general, people have used between 3 and 8 quarts of Raptor Liner to cover the interior of a vehicle, with some people using less and some people using more. It is always better to have too much than too little, so it is recommended to buy a little extra in case you need it.

2 quarts of Raptor Liner should be enough for the interior of a Bronco

2 Quarts of Raptor Liner for a Bronco Interior

If you're looking to coat the interior of your Bronco with Raptor Liner, 2 quarts should be enough to get the job done. This amount will allow you to cover the toe boards up to the last crease in the floor pan and the sides of the box.

However, the exact amount of Raptor Liner you'll need depends on several factors, including how thick you spray it, air pressure, and speed of application. Some Bronco owners have reported using 4 quarts for the full interior, wishing they had a little extra, while others have managed with just 3 quarts.

If you're planning to coat other parts of your Bronco, such as the tailgate or engine bay, you'll need additional Raptor Liner. For example, one Bronco owner used 6 quarts to coat the interior and the tailgate, and another used 4 quarts to coat the interior, engine bay, and wheel wells.

To get the best results and ensure you have enough material, it's always a good idea to buy a little more than you think you'll need. You can also purchase the 4-quart kit, which comes with a gun and provides some extra material for touch-ups or more coverage.

So, if you're planning to coat just the interior of your Bronco, 2 quarts of Raptor Liner should be a good starting point, but consider buying a little extra or opting for the 4-quart kit to ensure you have sufficient material for the job.

A 4-bottle kit of Raptor Liner is enough for the interior of a JKU

Raptor Liner is a popular product for coating the interior of vehicles, especially Jeeps. It provides a tough, durable finish that can protect the interior from scratches, scuffs, and other damage. It is also pliable and can handle acidic chemicals, making it a good choice for vehicles that are exposed to harsh conditions. The product is easy to apply and can be sprayed or rolled on, depending on the desired texture. Some preparation is required before applying Raptor Liner, including removing sound-deadening material and scuffing or sanding the surface. It is important to mask off any areas that you do not want to be coated and to work in a well-ventilated area as the product has a strong smell.

When applying Raptor Liner, it is important to follow the instructions carefully, including the recommended mixing and application times. Once mixed, the product has to be used within a certain timeframe, typically around an hour. It is also important to wear protective gear, such as a mask and gloves, during the application process. The texture of the finish can be adjusted by changing the pressure of the application gun or using different rollers.

Overall, a 4-bottle kit of Raptor Liner is a good choice for coating the interior of a JKU. It provides enough material to cover the interior, with some left over for touch-ups or additional coverage. The product is easy to use and provides a durable, pliable finish that can protect the interior of the vehicle from damage and harsh conditions. With proper preparation and application, Raptor Liner can transform the interior of a JKU and give it a new look.

A full day is needed to prep a JKU for Raptor Liner application

A Full Day's Prep for Raptor Liner Application

Raptor Liner is an excellent product for coating the interior of your JKU. The process is straightforward, but it does require a full day of preparation to ensure the best results. Here are some detailed instructions to guide you through the process.

Step 1: Remove the Interior

The first step is to remove the interior components of your JKU. This includes taking out the seats, carpet, and any other removable parts. It is important to set aside enough time for this step, as it can take up to four hours to carefully remove everything.

Step 2: Prep and Mask

Once the interior is cleared out, you will need to spend time prepping and masking off the areas you want to coat. This step is crucial and can take up to six hours to complete properly. Use a nylon brush or scotch-brite pads to scuff up the paint and create a rough surface for the Raptor Liner to adhere to. Pay special attention to any areas with surface rust, making sure to sand them down and apply a self-etching primer. After scuffing, wipe down the entire area with mineral spirits and then a second time with lacquer thinner to ensure a clean surface. Finally, use thick tape like WireTape to mask off the areas you don't want to coat, creating clean lines and preventing overspray.

Step 3: Spraying Technique

When you are ready to spray, remember that the technique is different from painting. Spray slow and close to the surface, covering it as you go. Do not try to spray upward, as this can cause blobs and uneven coating. Apply one good coat, and if needed, go back for a second coat after an hour. The Raptor Liner instructions recommend a spray gun pressure between 40-70 PSI, but for a smoother finish, you can set your compressor at 65 PSI.

Step 4: Reassemble

After spraying, allow the Raptor Liner to cure for a couple of days before reassembling the interior. The curing time is crucial, as the strong fumes need to dissipate, and the coating needs to harden fully. Reinstalling the interior should take around three hours, and then you can enjoy your refreshed JKU with its new protective coating!

A 4L kit of Raptor Liner is enough for the interior, rear bumper, and some other parts of a JKU

A 4L kit of Raptor Liner is enough to coat the interior, rear bumper, and some other parts of a JKU. The coating process involves removing the interior, masking everything off, spraying, and then putting everything back together. The time taken for the entire process is approximately 10 hours.

The amount of Raptor Liner needed depends on the thickness of the application, air pressure, and speed of application. A thicker coat will require more product, while a thinner coat can be achieved with less. Additionally, the texture of the Raptor Liner can be adjusted by changing the pressure of the application gun.

It is important to note that proper surface preparation is crucial for the best results. This includes removing sound-deadening material and scuffing or sanding the surface to ensure the Raptor Liner adheres properly. Some people choose to wet-sand the entire interior, while others only scuff the surface, and both methods can result in a good outcome.

When applying the Raptor Liner, it is recommended to do it in a well-ventilated area or a homemade paint booth. The drying time between coats can vary depending on the temperature and humidity, but it is generally advisable to wait at least 24 hours before applying a second coat or taping for a different color.

Raptor Liner is a versatile product that can be used for protection, repair, and personalization. It can be applied to metal and plastic surfaces, providing a durable and textured finish that is resistant to scratches and imperfections. The product is available in different colors, and users can even mix their own colors to match their vehicles.

Frequently asked questions