Easy Splint Pan Cleaning: Tips And Tricks

Keeping your splint pan clean is essential to maintaining its longevity and ensuring bacteria doesn't build up. Here are some simple methods to keep your splint pan clean and germ-free.

Use mild, non-abrasive detergents or a mild mixture of ammonia

To clean a splint pan, you must first switch off and unplug the unit, and then empty the pan. It is important to use mild, non-abrasive detergents or a mild mixture of ammonia to clean the pan. This is because harsher chemicals can mar or scratch the surface of the pan. When applying the detergent or ammonia, wipe in the direction of the stainless steel grain lines to further minimize scratching. After applying the cleaning agent, rinse the pan with clean, warm water and then wipe it dry.

It is important to avoid using bleach, chlorinated solvents, or other harsh chemicals when cleaning the stainless steel surfaces of a splint pan. If there are hard-water spots on the pan, use a strong solution of vinegar and water to remove them, and then rinse the pan with clean, warm water and wipe it dry.

Rinse with vinegar and water to remove hard-water spots

To remove hard-water spots from your splint pan, you can use vinegar and water. This is a great, natural way to clean your pan without the use of harsh chemicals.

Firstly, you will need to create a strong solution of vinegar and water. For this, you will need to mix two parts of distilled water with one part of white vinegar. The amount of solution you make will depend on the size of your splint pan. Mix the solution in a large bowl and then pour it into a spray bottle.

Next, spray the solution onto the affected areas of the pan. Focus on one area at a time so that you can properly dry the spots that have the solution on them. Gently rub the water stains with a soft, clean cloth. Any fine microfiber cloth will work. If the stains have been on your pan for a while, you may need to add a little more solution and leave it on for longer. New stains should lift easily and immediately.

Rinse the pan with clean water, either by using a hose or a clean cloth soaked in water. Dry your pan completely with a dry, clean towel. If necessary, repeat the process until all hard-water spots are removed.

You can also use this vinegar and water solution to remove hard-water spots from other surfaces, such as glass, sinks, tubs, and toilets.

Sterilize with alcohol

While it is important to note that isopropyl alcohol should not be used to soak a dental splint, it can be used to sterilize the appliance. Firstly, it is important to rinse the splint with warm water to remove any debris or plaque. Then, gently brush the splint with toothpaste and a soft toothbrush. Rinse the splint again, ensuring that all toothpaste residue is removed.

To sterilize the splint with alcohol, use isopropyl alcohol in a spray bottle and quickly spray the splint. Afterward, it is important to rinse the splint with water to remove any remaining alcohol. Finally, dry the splint before placing it back in your mouth or storing it in a clean, dry container.

Clean with toothpaste and a soft toothbrush

To clean a splint pan with toothpaste and a soft toothbrush, follow these steps:

Firstly, it is important to use a soft-bristled toothbrush to avoid damaging the splint. You will also need a non-abrasive toothpaste. Rinse the splint with cold or lukewarm water. Gently brush the splint with the toothpaste and soft toothbrush. Be sure to clean all sides of the splint, paying attention to any small hollows where residue may accumulate. Use gentle motions and avoid applying excessive pressure.

After brushing, thoroughly rinse the splint with cold running water to remove any remaining toothpaste. Allow the splint to air dry completely before storing it in a protective box. It is important to keep the splint dry when not in use and to store it in a safe place, as dogs may chew or eat the appliance if left accessible.

In addition to this cleaning method, it is recommended to disinfect the splint weekly. This can be done by soaking the splint in a solution of equal parts mouthwash and water for 10 to 15 minutes. Rinse the splint with cold water after soaking. Alternatively, you can use a denture cleaner following the instructions on the package.

Soak in a mouthwash and water mixture

To clean a splint pan, you can soak it in a mouthwash and water mixture. This is an easy and affordable method for cleaning dental splints. It is important to perform this mouthwash soak regularly, about once every two weeks, to keep your splint clean and protect its longevity.

To begin, create a mixture of mouthwash and water in a 1:1 ratio. Use a glass or container large enough to completely submerge your dental splint in the liquid. It is recommended to use alcohol-free mouthwash to avoid damaging your device.

Once you have prepared the mouthwash and water mixture, place your dental splint inside and ensure it is fully immersed. Allow the splint to soak for approximately 10 to 15 minutes. You may want to set a timer to ensure you don't forget and leave the splint in the mouthwash for too long, as this could potentially damage the device.

After soaking, thoroughly rinse the dental splint with cold or cool water. Make sure to remove all traces of the mouthwash solution. Finally, allow the splint to air dry completely before storing it.

By incorporating this mouthwash and water soak into your regular cleaning routine, you can effectively remove bacteria, prevent damage, and maintain the freshness and longevity of your dental splint.

Frequently asked questions