Mechanic Simulator: Installing An Oil Pan The Right Way

The oil pan is a crucial component in any vehicle, serving the important function of catching oil for the engine. In the Car Mechanic Simulator, players may encounter issues with the oil pan, such as not being able to put it back on after removing it or not being able to locate it at all. These issues can be frustrating and may cause players to become stuck in the game. However, there are solutions to these problems, such as ensuring that all necessary parts are installed and making sure to follow the correct steps for draining oil. By consulting guides and discussions related to the game, players can troubleshoot oil pan issues and continue their progress in the Car Mechanic Simulator.

Ensure the car is on a lift to access the oil pan

To ensure the car is on a lift to access the oil pan, start by pressing "M" while standing near the car. This will allow you to move the car to one of the two available spots with a car lifter. Once you've moved the car, use the switch on the left side of the car lift to raise it.

Now, you can safely slide underneath the vehicle to access the oil pan. Remember to take the necessary precautions to catch the oil as it drains from the oil pan. Place a container underneath the oil pan to catch the oil, and use a wrench to loosen the bolt on the oil pan before removing it with your fingers. The oil will take several minutes to drain completely.

It is important to note that you should not unscrew the oil drain plug before raising the car on the lift, as this will result in a cash penalty for cleaning up the spilled oil from the workshop floor. Instead, raise the car first, then move the oil drain underneath the car, and locate the oil drain plug.

Additionally, make sure to brace the back wheels of the car with wedges to prevent it from rolling while you work underneath. Always refer to your owner's manual for specific instructions and safety precautions before attempting any maintenance work on your vehicle.

Check for missing crankshaft or rod caps

When you are putting an oil pan on in a mechanic simulator, it is important to check for missing crankshaft or rod caps. If you don't see the oil pan, this could be because there is a cap missing from the crankshaft or a rod cap missing from the piston.

To check for missing crankshaft or rod caps, follow these steps:

• Put the car on a lift.
• Go under the engine. You will be able to see all the parts that need to be installed.
• Install all rod caps and crankshaft caps.
• Now you will be able to put the oil pan on.

Make sure you install all the rod caps and crankshaft caps before putting on the oil pan. If you don't, you may have to take the engine apart to install the missing caps.

Move the oil catch funnel under the car

To move the oil catch funnel under the car, follow these steps:

• Lift the car: Use a car lifter to raise the vehicle and provide access to the undercarriage. This step is crucial as it allows you to reach the oil drain plug and position the funnel correctly.
• Locate the oil drain plug: Before moving the funnel, identify the oil drain plug. It is usually located near the engine on modern cars, but the exact position can vary depending on the car's make and model.
• Position the oil catch funnel: Move the funnel under the car, ensuring it is directly under the oil drain plug. The funnel should be placed on the ground or a suitable receptacle to catch the draining oil.
• Secure the funnel: Ensure the funnel is stable and secure to avoid any accidental spills or messes. You may need to adjust the height of the car lift to get the ideal position for the funnel.
• Prepare for oil drainage: Before draining the oil, make sure you have the necessary tools and safety equipment, such as gloves, to protect your hands from the oil.
• Final adjustments: Check that the funnel is correctly aligned with the oil drain plug. Make any necessary adjustments to ensure the oil will drain directly into the funnel.

Once the oil catch funnel is securely positioned under the car, you can proceed with the next steps in the oil change process, such as removing the oil drain plug and allowing the oil to drain. Remember always to refer to your car's owner's manual for specific instructions and safety precautions.

Use the funnel to drain the oil

To use the funnel to drain the oil, you must first put the car on a lift. Once the car is lifted, go underneath the engine and you will be able to see all the parts you need to put in place.

Next, you need to locate the oil drain funnel. The oil drain is located in the corner of the workshop, standing next to the boxes. To move the oil drain, approach it and once its shape is highlighted, press the mouse button. It will then stick to you, allowing you to relocate it to any place in the workshop.

Now, take the oil drain funnel and move it underneath the car. While still holding the funnel, look as far up as you can and line up the cursor with the oil drain plug. Let go of the funnel using the Esc button. The oil drain funnel is now perfectly positioned under the oil drain plug. The only thing left to do is to remove the oil drain plug.

The reason this method works is that you are holding the drain funnel slightly in front of you, which justifies the gap between the cursor and the oil drain plug. As you can see, the oil will flow nicely into the oil drain funnel.

After draining the oil from the engine, move the funnel from underneath the car and lower the vehicle using the car lift switch. Now, locate the oil fill plug inside the engine bay. To start pouring in oil, go into disassembly mode and interact with the oil fill plug. After unscrewing the plug, an oil can should appear over the oil infusion. Press the mouse button to pour oil into the engine.

To pour the correct amount, hold the can in the pouring position until it slightly tilts backward while still pouring oil. Continue pouring for one or two more seconds, and you should be good to go. A proper refill should cost about $15. The cost of the refill will be indicated in the bottom right corner of the screen.

To check if you've done it correctly, use the oil dipstick located either on the front or side of the engine. The oil level should be between the minimum and maximum levels on the dipstick, preferably in the middle of said levels. If you've poured in too much oil, you must drain the oil again and refill it.

Locate the oil fill plug to refill the oil

Once you've drained the oil and replaced the oil filter, you'll need to locate the oil fill plug to refill the oil.

First, open the vehicle's hood and locate the oil cap on top of the engine. The cap will be about 2 inches (5.1 cm) across and should have an oil symbol (or the word "oil") on top. Grasp the cap and twist it counterclockwise to unscrew it. Set the oil cap somewhere nearby where you won't forget it or lose it.

Now, you can start adding new oil to the car at the fill hole. Be sure to use the correct type of oil for your vehicle. Check your owner's manual for the correct oil type and capacity. Pour the oil into the engine's fill hole, being careful not to spill any. Once you've added the correct amount of oil, screw the fill cap back into the oil fill hole. Turn it clockwise until it's fully tightened to prevent any oil spillage.

Frequently asked questions