Cody Casey
The DJI Spark drone offers a range of panorama photo modes, including Horizontal, Vertical, 180°, and Sphere. Sphere mode allows users to capture tiny planet-shaped photos with a fisheye lens effect, creating a 360-degree panoramic image. This mode is available through the DJI GO 4 mobile app and requires the latest firmware updates. Once in Sphere mode, the drone will automatically capture and stitch together 46 images to create the panoramic photo. Users can then download and share their Spheres on social media platforms, although some have noted that the actual sphere globe is not included in the download, only the stitched panorama.
| Characteristics | Values |
|---|---|
| Panorama modes | Horizontal, Vertical, 180°, Sphere |
| Horizontal mode | Takes 9 photos and stitches them together for a wide-angle panorama |
| Vertical mode | Takes 3 photos and stitches them together to produce a 16:9 aspect ratio image |
| 180° mode | Takes 21 photos to create a 180° panoramic photo |
| Sphere mode | Captures 46 photos to create a 360° panorama with a fisheye lens effect |
| Sphere mode download | Downloading the sphere results in a panorama of the stitches, not the sphere itself |
| Sphere mode sharing | Spheres can be shared on social media, but not directly from the DJI app |
| Sphere mode saving | The sphere image is not saved to the SD card, only the individual photos used to create it |
| Sphere mode software | Requires the latest firmware and DJI GO 4 mobile app |
| Sphere mode process | Takes around 2 minutes, including takeoff and landing |
Explore related products
What You'll Learn
How to set up your DJI Spark for Pano Sphere mode
To set up your DJI Spark for Pano Sphere mode, you will need to ensure you have the latest firmware installed on your drone and remote controller, and the latest DJI GO 4 mobile app.
The Sphere mode is included in the latest version of the DJI GO 4 mobile app and all subsequent Spark firmware updates. Once you have the latest firmware, launch the DJI GO 4 app. You can then fly your drone to the desired height and location, and then press the Sphere icon on the right-hand side of the app. The drone will then begin capturing the images required for the Sphere mode—it will take 46 images and stitch them together to create a 360-degree panorama.
The process takes just under two minutes, and you can monitor the progress in the app. Once it's complete, a ''Pano successful' prompt will appear. You can then download the panorama to your phone, or share it directly to social media via the SkyPixel link.
Note that when using Sphere mode, the final sphere image may not be saved to the SD card—only the individual images used to create the sphere will be saved. You can also use third-party software, such as MS ICE, to stitch the images together and create a higher-resolution panorama.
Sear Steak, Avoid Fire Alarm Chaos
You may want to see also
Explore related products
Using the DJI GO 4 app to capture and stitch photos
To capture and stitch photos using the DJI GO 4 app, you must first ensure that you have the latest firmware installed on your drone and remote controller. Once you have updated the firmware and the DJI GO 4 app, you can select the Pano mode you wish to use. Sphere mode is a new feature that allows you to take 360-degree panoramic shots, which give your pictures a tiny planet look.
After selecting Sphere mode, your Spark drone will take 46 pictures for you to stitch into a 360-degree panorama. You can monitor the progress of the stitching in the app, and once finished, a prompt will appear saying, 'Pano successful'. You can then tap the playback button to check your photos. The DJI GO 4 app will automatically stitch the photos into a panorama, and you can then save the panoramic photo to your phone.
If you want a high-resolution photo, you can use third-party software such as DJI Media Maker, MS Ice, or other stitching software to stitch the RAW images into a panorama. It should be noted that when the aircraft's GPS signal is weak, the surface texture is unclear, or there is strong wind, the aircraft may not perform precision hovering, which may affect the stitching quality.
Additionally, there is an option to download Spheres to your phone, but you will only get a panorama of the stitches and not the actual sphere globe. You can also share your Spheres directly to social media through SkyPixel, which will send links to other social media channels.
Removing Overheated Oil: Pan Cleaning Tips and Tricks
You may want to see also
Explore related products
![[Drone Parts] for DJI Spark Gimbal Camera Lens Glass Repair Parts as Replacement [Easy to Replace]](https://m.media-amazon.com/images/I/31G372Fv2bL._AC_UL320_.jpg)
How to download and share your Sphere photos
To download and share your Sphere photos, follow these steps:
First, you will need to take your 360-degree sequence of images using the DJI GO app on your device. Make sure your Spark drone is connected to your device via Wi-Fi and that you have the latest version of the DJI GO 4 app installed. Once you have taken off, simply fly your drone to the desired location and press the Sphere icon on the right-hand side of the app. The drone will then automatically stitch together a panorama of 46 images to create your Sphere photo.
After landing, stay in the DJI GO app and, with the Spark still powered on, push the play icon on the bottom right of the screen. You will then see a photo with a little sphere symbol. Click on this, and it will process the image. Once the image is processed, you have a few options for downloading and sharing:
- Save the Sphere image to the camera roll on your phone. From there, you can upload and share it directly to social media platforms such as Facebook or Instagram. However, it is important to note that you will only be able to share a flat panorama of the stitches and not the interactive sphere globe. To make the image compatible with Facebook's 360 viewer, you can use an app such as GoPro or Theta S, or transfer the image to your computer and use Exiftool to add the necessary attributes.
- Share your Sphere photo directly to SkyPixel, a platform that hosts interactive Sphere images. From there, you can generate links to share on other social media platforms.
- Download the individual image files and use software such as Hugin, Microsoft ICE, or Autopano Giga to stitch them together and create your Sphere photo.
Additionally, if you wish to upload your Sphere photos to Instagram, you can try using the Theta+ app. This app allows you to stitch and edit your photos before saving them to your device and posting them to Instagram.
Cheesecake Baking: Springform Pan Essential?
You may want to see also
Explore related products
Using third-party apps to edit and share your Sphere photos
To capture a Sphere photo with the DJI Spark drone, you need to update the firmware and the DJI GO 4 app. Once updated, you can select the Sphere mode under the Pano mode. The drone will then take 46 pictures and stitch them into a 360-degree panorama. The Sphere photo can be viewed and downloaded to your phone via the DJI GO 4 app.
While the DJI GO 4 app allows you to capture and view Sphere photos, you might want to use third-party apps to edit and share your photos. Here are some third-party app options for editing and sharing your Sphere photos:
Theta+
The Theta+ app allows you to view your Spark 360s outside the DJI GO 4 app. However, some users have mentioned that they had to resize the image in another app, like MS Paint, to a 6000x3000 pixel version before importing it into Theta+.
Hangar360
Hangar360 is another app that can be used to capture and share 360-degree panoramas. However, it is only available for iOS devices.
Sphere.photos
Sphere.photos is a platform that allows you to keep all your photos, videos, PDFs, documents, and other files in one place. You can create a "Sphere" or album on the map where your event is located and upload your items. You can then invite your friends to your Sphere and give them access to upload their items as well. Sphere.photos offers features like secure access, the ability to find "lost" images, and easy organisation through "Superspheres" and groups.
Google Photo Sphere
Google Photo Sphere allows you to create immersive photo experiences. If you're using an Android device, you can use the Google Camera app to capture photo spheres. For iOS devices, you can download the Photo Sphere Camera app from the App Store. After capturing the photo sphere, you can view it in your device's gallery and share it with yourself. You can then upload the JPEG to the Street Sphere generator to generate an HTML file of custom Street View code, which you can share with your audience.
Sterling Silver Pots and Pans: Cleaning and Care
You may want to see also
Explore related products
![[Drone Parts] for DJI Spark Part - LED Shade Lights Lamp Cover & Lamp Cover Plate/Base Lamp Protection Component Replacement [Easy to Replace](4pcs Light Cover)](https://m.media-amazon.com/images/I/61+Dulf2cjL._AC_UL320_.jpg)
Troubleshooting common issues with Pano Sphere mode
If you are unable to locate your final Sphere image, it may be because the image is not saved to your SD card. Instead, the individual photos taken to create the Sphere image are saved. To resolve this, ensure that your Spark is powered on, then locate the photo with the sphere symbol in the DJI GO app and click on it to stitch and process the image. Once stitched, you can save the Sphere image to your camera roll.
If you are experiencing issues with the resolution of your Sphere image, you can try using a different app to view your Spark 360s, such as the Theta+ app or the Hangar360 app for iOS devices. Additionally, you can use MS Ice to stitch the images together, followed by MS Paint to create a higher-resolution version of the panorama.
For those having trouble with the Spherical Pano Mode, it is recommended to ensure that you have installed the latest firmware on your drone and remote controller, as well as the latest DJI GO 4 mobile app, to access and utilize the Sphere mode effectively.
If you are encountering issues with uploading your Sphere image to Facebook, you may need to adjust the image size and metadata. First, save your Sphere image from the DJI app, which will provide a 4000x2000 pano with an acceptable ratio. Then, use an image converter to convert the file to .bmp so that MS Paint can open it. Resize the image in MS Paint to 6000x3000 pixels, the maximum size allowed by Facebook. Finally, use a website like theXifer.net to input the required metadata for Facebook to recognize your image as a 360-degree photo.
Perfect Pork Chops: Sautéing in Oil for Best Results
You may want to see also
Frequently asked questions
The Pano Sphere mode on the DJI Spark is a feature that allows you to capture 360-degree immersive photos with a fisheye lens effect, resulting in a tiny planet-shaped image.
To use the Pano Sphere mode, ensure you have the latest firmware and the DJI GO 4 app. Launch the app, connect your drone, and enter the camera view. Fly your drone to the desired height and press the Sphere icon in the app. The drone will automatically capture and stitch the images to create a 360-degree panorama.
After capturing the photos, you can view the stitched panorama in the DJI GO 4 app by tapping the playback button. You can download the Sphere photos to your phone or share them directly on social media platforms like Facebook. However, for interactive sharing, you may need to use third-party apps or websites to convert the files and create metadata that platforms like Facebook can recognize as 360-degree images.
